• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.345-352
• /
• 1995

진공예냉처리에 의한 표고버섯의 변색, PPO활성 및 유리아미노산 함량 변화에 미치는 영향을 조사 하였다. 저장중 예냉처리한 버섯의 경우 예냉처리하지 않은 버섯에 비하여 표면색택의 변화가 억제되어짐을 알 수 있었다. 한편 저장중 Polyphenoloxidase(PPO) 의 활성은 증가하였는데 예냉처리한 버섯의 경우 예냉처리하지 않은 버섯에 비하여 PPO 활성이 낮게 나타났고 갈변이 진행되면서 그 활성이 상대적으로 더 증가한 것으로 나타났다. 그리고 포장방법에 있어서는 PVC 랩포장한 경우가 골판지 포장한 표고버섯에 비하여 변색이 억제됨을 알 수 있었고 아울러 PPO 활성도 더 낮게 나타났다. 표고버섯의 유리아미노산 함량은 수확 직후에는 2,501 mg%였으며 그 중 glutamic acid가 가장 많았고, 저장중 유리아미노산 함량은 계속 감소하는 경향을 나타내었다. 처리구별 차이를 보면 예냉처리한 버섯의 유리아미노산 함량이 예냉처리하지 않은 버섯에 비하여 전반적으로 높게 나타났으며, 저장온도와 포장방법 그리고 기간에 따라서 상당한 변화를 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.448-450
• /
• 2010

Free surface liquid jet impingement, which is applicable to cooling of hot plates in a steel-making process, is investigated numerically by solving the conservation equations of mass, momentum and energy in the liquid and gas phases. The free-surface of liquid-gas interface is tracked by an improved level-set method incorporating a sharp-interface technique for accurate imposition of stress and heat flux conditions on the liquid-gas interface. The level-set approach is combined with a non-equilibrium $k-{\omega}$ turbulence model. The computations are made for slit nozzle jets to investigate their flow and cooling characteristics. Also, the effects of jetting angle, velocity and moving velocity of plate on the interfacial motion and the associated flow and temperature fields are quantified.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.318.2-318
• /
• 2002

Axial fans are widely used in heavy machines due to their ability to produce high flow rate fur cooling of engines. At the same time, the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. To calculate the unsteady resultant force over the fan blade in an unsymmetric engine room, Time-Marching Free-Wake Method is used. From the calculations of unsteady force on fan blades, noise signal of an engine cooling fan is calculated by using an acoustic similarity law. (omitted)

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.174-178
• /
• 2011

This paper deals with the free cooling system of express bus using natural energy source in order to improve the room air quality and save cooling energy. In an express bus, there are may passengers in unit area, requiring the improvement of air quality and giving higher energy saving efficiency. Particularly, the express buses running fast make it easy to take in outdoor air at a flow rate controllable with a damper mechanism. This paper proposes the analysis on the air flow achieved by a damper controlled vertically and horizontally in order not to deteriorate the ride comfort of the passengers.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.24-24
• /
• 2004

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.272-277
• /
• 2003

This paper reports the fluid flow and heat transfer around a module cooled by forced air flow generated by a piezoelectric(PZT) cooling fan. A flexible PZT fan with distortion in a fluid transport system of comparatively simple structure which was mounted on a PCB in a parallel-plate channel($450{\times}80{\times}700mm^3$) accelerates surrounding fluid locally. Input voltages of 20-100V and a resonance frequency of 23Hz were used to vibrate the cooling fan. Input power to the module was 4W. The cooling effect using a PZT fan was larger than that of free convection. Fluid flow around the module were visualized by using PIV system. The temperature distribution around heated module were visualized by using liquid crystal film(LCF). We found that the flow type was y-shaped and the cooling effect was increased by the wake generated by a piezoelectric cooling fan.

• 대한기계학회논문집B
• /
• 제22권9호
• /
• pp.1195-1207
• /
• 1998

Periodic pulsations in the static pressure near turbine surfaces as blade rows move relative to each other is one of the important sources of turbine unsteadiness. The present experiment aims to investigate the effect of the static pressure pulsations on the interaction of film coolant flows from two rows of staggered holes with mainstream and its effect on film cooling heat transfer. Potential flow pulsations are generated by the rotating shutter mechanism installed downstream of the test section, The free-stream Strouhal number based on the boundary layer thickness is in the range of 0.033 - 0.33, and the amplitude of about 10-20%. Measured are time-averaged and phase-averaged velocity variations, pressure variations and temperature distributions of the flow field. Experimental conditions are identified by boundary layer measurements. Injectant behavior is characterized by the measurements of unsteady pressure in the plenum chamber and free-stream static pressure. The film cooling effectiveness is evaluated from the insulated wall temperature measurement. It has been found that bulk flow pulsation provides very large diffusion of the injectants and the effectiveness is significantly reduced by the flow pulsations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.321-328
• /
• 2009

Free surface impinging jet on a moving plate, which is applicable to cooling of hot metals in a steel-making process, is investigated numerically by solving the Navier-Stokes equations in the liquid and gas phases. The free surface of liquid-gas interface is tracked by a level-set method which is improved by incorporating the ghost fluid approach based on a sharp-interface representation. The method is further improved by employing a nonequilibrium $\kappa-\varepsilon$ turbulence model including the effect of low Reynolds number. The computations are made to investigate the effects of the nozzle pitch, moving velocity of plate and jet velocity on the interfacial motion and the associated flow and temperature fields.

• 대한설비공학회지:설비저널
• /
• 제3권4호
• /
• pp.263-266
• /
• 1974

• Parasites, Hosts and Diseases
• /
• 제30권2호
• /
• pp.151-153
• /
• 1992

자유생환 아메바를 효과적으로 유지할 목적으로 냉동보관을 시도하였다. Glycerol과 Dimethylsulfoxide를 각 각 최종농도 7.5%가 되도록 아메바현탁액에 첨가하였다. 아매바 영양형을 냉동하는 과정에서 온도 하강속도가 빠를때 (평균 $1.3^{\circ}C/min$)보다 느릴때 (평균 $0.7^{\circ}C/min$) 생존력이 더 높았다. 액체질소 속에서 60일동안 보관한 후의 생존율은 처음 넣어준 아메바 영양형 수의 2~39%에 달하였다. 냉동 보관했던 아메바를 해동했을 때 어떤 형태적 변화나 배양했을 때의 문제점도 관찰되지 않았다.