• 열처리공학회지
• /
• 제9권1호
• /
• pp.19-26
• /
• 1996

Melt-quenching of steels leads to various metallographic effects such as refinement of grain size, extension of the solid solubility of carbon and alloying elements, and is expected to improve the mechanical properties of conventional steels. Furthermore, this technique is a useful method for producing sheet directly from liquid state. And it will lend itself to development as a continuous cast process which offers significant savings in energy and product costs. The purpose of this study is to present the microstructures of melt-quenched austenitic stainless steels. As the results of this study, the morphology of melt-quenched microstructure show that the roll contact area is columnar structure, and the free surface area is dendrite structure. As the line speed increases, the ratio of $d_{colunnar}/d_{total}$ increases from 0.12 to 0.60, but the ribbon thickness decreases from $150{\mu}m$ to $30{\mu}m$.

• 대한조선학회지
• /
• 제12권2호
• /
• pp.3-12
• /
• 1975

As for two dimensional added mass coefficients for straight framed hull forms in a free surface of an ideal fluid, theoretical calculations by F.M. Lewis, vertical, K. Wendel, J.H. Hwang, and etc. are available; vertical modes of rectangular and triangle sections by Lewis, vertical, horizontal and torsional models of rectangular and triangle section by Wendel, and systematical calculations for vertical modes of single chine forms by Hwang. In this paper, employing the conformal transformation by which a unit circle and its exterior region can conformally mapped to a polygon and its exterior region, the author calculated two dimensional added inertia coefficients systematically for straight framed sections with single chine in horizontal and torsional modes of vibrations. As the results, it was found that sloping side angle is an important factor measuring the magnitude of two dimensional added inertia coefficient for a set of given values of the sectional area coefficient and the beam-draft ratio. To grasp it cleary in physical sense, pressure distributions are investigated for some typical section contours. The numerical results are presented graphically in the form of two dimensional added sectional area coefficients with beam-draft ratios and sloping side angles as parameters, so that the data may conveniently utilized for estimation of the added inertia coefficients based on a three parameter technique.

• 전자공학회논문지C
• /
• 제34C권4호
• /
• pp.26-35
• /
• 1997

This paper proposes a multi-bit $\Sigma\Delta$ modulator arcitecture which eliminates signal clipping problem. To avoid signal clipping, the output values of intgrators are monitored and modified by a reference value. This oepration is recorded as a digital code to restore actual signal value. Due to the digital code, the substraction of feedback value from the multi-bit quantizer can be calculated by a digital adder and this simplifies dAC operation making the accurate DAC of conventional multi-bit $\Sigma\Delta$ modulator scheme unnecessary. These features make N-th modulator can be implemented by sharing an integrator among N stages to decrease the required chip area. As an experimental example, a 4th order .sum..DELTA. modulator with oversampling ratio of 64 was simulated to show over 130 DB SNR at rail-to-rail input sinusoidal signal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1515_1516
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based micro-sensor was developed for simultaneous measurement of temperature and humidity. The developed sensor is composed of a SAW reflective delay lines structured by an IDT (Inter-Digital Transducer), four reflectors and humidity sensitive film (polyimide). Polyimide was dry-ecthed by RIE (Reactive Ion Etching) to obtain high roughness, which gives the large reaction area resulting in high sensitivity. In wireless testing using a network analyzer, sharp reflection peaks with high S/N ratio, small signal attenuation, and few spurious peaks were observed in the time domain. High sensitivity towards the temperature and humidiy were also observed in the large concentration range. The obtained sensitivity was $16.8^{\circ}/^{\circ}C$ for temperature sensor and $15.8^{\circ}$/%RH for humidity sensor.

• 에너지공학
• /
• 제21권4호
• /
• pp.378-384
• /
• 2012

Higher compression ratio is required in diesel engine to ignite the fuel that leads to better efficiency. For complete combustion inside the cylinder it is important to ensure the clean air flow with free of debris and as cool as possible. In this manner, modification of intake valve arrangements is taken in to consideration importantly. In this paper, the intake valve arrangements are modified with newly designed valve mixer. It causes swirl flow of air through the intake port that mixing with the fuel followed by complete combustion. The use of valve mixer reduces the carbon sediment formation on valve fillet and its face area as the carbon particles gradually take place on it after certain running period. It therefore, helps to increase the valve lifetime. And at the same time it reduces the exhaust elements i.e. soot from the automobiles to a significant level.

• 대한수의학회지
• /
• 제16권1호
• /
• pp.65-69
• /
• 1976

A total of 736 Holstein cows were examined for incidence of infertility and 57 infertile cows of them were examined for blood values. The results obtained were as follows: 1. Fifty eight heads (7.9%) of 736 Holstein cows examined were proved to be infertile and the causative disease of 58 infertile cows were diagnosed as silent heat (31.0%), repeat breeder (20.8%), dysfunction of ovary (15.5%), lutein cyst (13.8%), endometritis (8.6%), follicular cyst (5.2%), cervicitis (1.7%), pyometra (1.7%), and free-martin (1.7%). 2. Among the data of blood values of 57 infertile cows, values of total serum protein and serum calcium were remarkably lower (p 0.01) than those of normal cows. Meanwhile the unbalanced Ca/P ratio (1.1) was observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.556-559
• /
• 2006

We successfully developed a high performance and highly reliable blazed GxL device with a high optical efficiency and a high contrast ratio. The device demonstrated superior resistance against a high power laser, which is suitable for a large-area laser projector. We operated the world's largest laser projection screen using this device at the 2005 World Exposition in Aichi, Japan, problem free.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1068-1073
• /
• 2007

3D finite element analyses of a corrugated steel web girder and a steel truss web girder are conducted to investigate the static and dynamic behaviour of the hybrid girders. And the analyses results are compared with those by the equivalent beam theory. The equivalent theory is a theory that all section properties of a truss structure are replaced by section properties of a beam including the shear coefficient. When applying the equivalent beam theory, the shear coefficient of the corrugated steel web girder is estimated as the area ratio of total section to web section and that of the steel truss web girder is calculated by the equation proposed by Dewolf. Static deflections and natural frequencies by 3D finite element analyses and the those by the equivalent beam theory are relatively in good agreement.

• Ocean Science Journal
• /
• 제43권3호
• /
• pp.127-133
• /
• 2008

Reproductive patterns of an epifaunal amphipod, Pontogeneia rostrata, were studied on Dolsando sandy shore in Korea. The life history pattern was iteroparous, with recruitment mainly occurring from winter to spring. The sex ratio was malebiased, especially during breeding periods. The mean body length of females was significantly larger than that of males. Brood size and egg volume were positively related to the body length of ovigerous females. There was no significant difference in brood size between successive breeding periods, but egg volumes were significantly higher in early winter (December) than in late spring breeding (May and June), increasing the probability of survival to hatching. These traits contribute to more reproductive potential in early winter than in late spring breeding. The mean brood size of epifaunal P. rostrata was larger but the mean egg volume smaller than that of infaunal amphipods in this sampling area. We suggest that reproductive effort for epifaunal species may be proportionally greater than for infaunal species in risky environments.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.415-420
• /
• 2007

In analyzing the nano-scale behavior of nano devices or materials, QC method is efficient because it does not treat all the atoms. But for more accurate analysis in QC method, it is important to consider temperature and surface effects. In finite temperature, free energy is considered instead of potential energy. Because the surface area to volume ratio increases as the length scale of a body decreases, the surface effects are more dominant. In this paper, temperature related Cauchy-Born rule and surface Cauchy-Born rule are proposed to configurate the strain energy density. This method is applied to small and homogeneous deformation in two dimensional problem using finite element simulation.