• Imaging Science in Dentistry
• /
• 제31권4호
• /
• pp.205-207
• /
• 2001

Purpose : The aim of present study is to estimate the relationship among reference lines used for taking the extraoral radiography and panoramic radiography. Materials and Methods: Lateral cephalographs of 40 adults, aged 22 to 30 years were taken. Angles between reference lines (Frankfort line, canthomeatal line, infraorbitomeatal line, and occlusal plane) were measured. Results: Angles between Frankfort line and canthomeatal line, Frankfort line and infraorbitomeatal line, Frankfort line and occlusal plane, canthomeatal line and infraorbitomeatal line, canthomeatal line and occlusal plane, and infraorbitomeatal line and occlusal plane were 16.1° (±2.2), 5.8° (±2.4), 8.7° (±3.5), 10.3° (±1.3), 24.8° (±4.0), and 14.5° (±4.4),respectively. Conclusion: Angle between frankfort and canthomeatal line is very different with commonly known angle. Frankfort horizontal reference lines used for panoramic radiography need an exact definition and more accurate standard is needed for the taking of panoramic radiograph.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.865-875
• /
• 1998

교정이나 악교정 수술 환자에서 치료계획 수립과 치료결과의 평가를 위해서 지금까지 많은 수평기준선이 사용되고 있으나 정확성과 재현성 등의 문제가 존재하고 있으며, 더욱 객관적인 수평기준선이 설정 될 수 있다면 교정학 분야에서 많은 발전이 기대될 수 있을 것이다. 이에 본 연구에서는 한국 성인의 부정교합군과 성별에 따른 Sella-Nasion(SN) 평면과 Frankfort-Horizontal(FH) 평면이 이루는 각도 및 FH평면과 다른 수평면 간의 상관 관계를 조사하기 위하여 먼저 임상검사를 시행하여 총 600 여명을 대상으로 측모두부규격 방사선사진을 촬영하였다. 계측결과를 바탕으로 연구대상을 골격성 I급 부정교합군 또는 정상교합군(남 50, 여 50), 골격성 II급 부정교합군(남 50, 여 65), 골격성 III급 부정교합군(남 50, 여50)으로 분류한 후 10개의 항목을 평가하여 다음과 같은 결론을 얻었다. 1. SN평면과 FH평면이 이루는 각도는 부정교합에 따른 차이는 없었으나 성별 간에는 세 부정교합군 모두에서 차이를 보여 남자는 $7.47{\pm}2.40^{\circ}$, 여자는 $8.93{\pm}2.72^{\circ}$ 였다. 2. SN 평면 또는 FH 평면과 Mandibular Plane이 이루는 각은 모든 부정교합군에서 여자가 남자보다 컸으며, 골격성 II급 부정교합군과 III급 부정교합군이 I급 부정교합군보다 큰 각도를 나타내었다. 3. FH평면과 Palatal Plane이 이루는 각은 부정교합군 및 성별에 따른 차이를 보이지 않고 비교적 일정하였다. 4. Gonial angle은 남녀 모두 III급 부정교합군이 다른 두 부정교합군보다 큰 각도를 보였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권3호
• /
• pp.123-129
• /
• 2014

Objectives: The aim of this study was to verify the concordance of the measurement values when the same cephalometric analysis method was used for two-dimensional (2D) cephalometric radiography and three-dimensional computed tomography (3D CT), and to identify which 3D Frankfort horizontal (FH) plane was the most concordant with FH plane used for cephalometric radiography. Materials and Methods: Reference horizontal plane was FH plane. Palatal angle and occlusal plane angle was evaluated with FH plane. Gonial angle (GA), palatal angle, upper occlusal plane angle (UOPA), mandibular plane angle (MPA), U1 to occlusal plane angle, U1 to FH plane angle, SNA and SNB were obtained on 2D cephalmetries and reconstructed 3D CT. The values measured eight angles in 2D lateral cephalometry and reconstructed 3D CT were evaluated by intraclass correlation coefficiency (ICC). It also was evaluated to identify 3D FH plane with high degree of concordance to 2D one by studying which one in four FH planes shows the highest degree of concordance with 2D FH plane. Results: ICCs of MPA (0.752), UOPA (0.745), SNA (0.798) and SNB (0.869) were high. On the other hand, ICCs of gonial angle (0.583), palatal angle (0.287), U1 to occlusal plane (0.404), U1 to FH plane (0.617) were low respectively. Additionally GA and MPA acquired from 2D were bigger than those on 3D in all 20 patients included in this study. Concordance between one UOPA from 2D and four UOPAs from 3D CT were evaluated by ICC values. Results showed no significant difference among four FH planes defined on 3D CT. Conclusion: FH plane that can be set on 3D CT does not have difference in concordance from FH plane on lateral cephalometry. However, it is desirable to define FH plane on 3D CT with two orbitales and one porion considering the reproduction of orbitale itself.

• 치과방사선
• /
• 제20권1호
• /
• pp.19-27
• /
• 1990

The primary objective of this study was to analyze the hard and soft tissue profile and comparison of the both sexes in Korean adults using roentgenocephalometry. The subjects were 122 males and 116 females from 18 to 22 years of age selected on the basis of their excellent occlusion and harmonious profile. It was an investigation about the interrelationships in the angles which consisted of Frankfort horizontal plane (FH plane), Sella Nasion plane (SN plane), Nasal floor plane (NF plane) and Mandibular plane (Md plane) as reference planes, and of the axial inclinations of the upper anterior tooth to Nasal floor plane (NF Plane) and of the lower anterior tooth to Mandibular plane (Md Plane). Among the 14 categories estabilishied on the soft tissue land marks, the 6 categories were studied for the relationship to Frankfort horizontal plane (FH Plane), and the 8 categories were studied for the soft tissue contour. The results were as follows: 1. Among 8 measured angles in the hard tissue, the angle of FH-Md, NF-Md and SN-Md were greater in females than in males. 2. The axial inclinations of the anterior teeth to NF Plane and Md plane were slightly greater in males than In females. 3. Among 14 measured angles in the soft tissue, the angles of G-Sn-P and E-Pog-Sn were greater in males, and FH-G-Sn, GㆍSn-Sn. Pog and Pog-Sn-P were greater in females. 4. In males, the variability of measured values in both lips region were high.

• The Journal of Advanced Prosthodontics
• /
• 제5권1호
• /
• pp.58-66
• /
• 2013

PURPOSE. The purpose of this study was to decide the most appropriate point on tragus to be used as a reference point at time of marking ala tragus line while establishing occlusal plane. MATERIALS AND METHODS. The data was collected in two groups of subjects: 1) Dentulous 2) Edentulous group having sample size of 30 for each group with equal gender distribution (15 males, 15 females each). Downs analysis was used for base value. Lateral cephalographs were taken for all selected subjects. Three points were marked on tragus as Superior (S), Middle (M), and Inferior (I) and were joined with ala (A) of the nose to form ala-tragus lines. The angle formed by each line (SA plane, MA plane, IA plane) with Frankfort Horizontal (FH) plane was measured by using custom made device and modified protractor in all dentulous and edentulous subjects. Also, in dentulous subjects angle between Frankfort Horizontal plane and natural occlusal plane was measured. The measurements obtained were subjected to the following statistical tests; descriptive analysis, Student's unpaired t-test and Pearson's correlation coefficient. RESULTS. The results demonstrated, the mean angle COO (cant of occlusal plane) as $9.76^{\circ}$, inferior point on tragus had given the mean angular value of IFH [Angle between IA plane (plane formed by joining inferior point-I on tragus and ala of nose- A) and FH plane) as $10.40^{\circ}$ and $10.56^{\circ}$ in dentulous and edentulous subjects respectively which was the closest value to the angle COO and was comparable with the values of angle COO value in Downs analysis. Angulations of ala-tragus line marked from inferior point with occlusal plane in dentulous subject had given the smallest value $2.46^{\circ}$ which showed that this ala-tragus line was nearly parallel to occlusal plane. CONCLUSION. The inferior point marked on tragus is the most appropriate point for marking ala-tragus line.

• Journal of Korean Dental Science
• /
• 제14권1호
• /
• pp.26-31
• /
• 2021

Purpose: This study aimed to find a correlation between the occlusal plane and two reference planes that are frequently used in semi-adjustable articulators. Materials and Methods: Sixty-two males and fifty females with normal articulation were recruited and the lateral cephalograms of these patients were taken. The angles between the Frankfort horizontal (FH) and the occlusal planes, the angles between the gnathologic and the occlusal planes, and the angles between the FH and gnathologic planes were measured on the lateral cephalograms. Result: The mean angles between the FH and the occlusal planes was 8.29°±3.62°, with 8.88°±3.09° and 7.63°±4.10° for male and female patients, respectively. The mean angles between the gnathologic and the occlusal planes was 2.77°±3.62°, and the angle between the FH and the gnathologic planes was 5.52°±3.62°. No significant differences were found in the measured angles between the male and female patients (P>0.05). Conclusion: Different guidance angles may be applied to articulators for prosthodontic restoration, depending on the reference planes that the articulators use.

• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.25-29
• /
• 1989

The author analized 17 complete denture patients with lateral cephalometric roentgenograms and following results were obtained: 1. The angle between the Ala tragus line and the occlusal plane was $4.38^{\circ}$. 2. The angle between the Ala tragus line and the Frankfort horizontal plane was $13.68^{\circ}$. 3. The line between the mouth corner and the retromolar pad was more parallel to the occlusal plane than the Ala tragus line.

• 대한치과교정학회지
• /
• 제29권2호
• /
• pp.251-265
• /
• 1999

환자의 진단이나 치료계획 수립 및 치료의 결과를 평가하기 위해서 현재까지 여러 가지 수평 기준선들이 사용되고 있으나 그 정확성과 재현성이 문제가 되고 있으며 기존의 연구도 서양인을 대상으로 한 수평 기준선을 사용한 경우가 대부분이다. 특히 성장이 완료된 후의 상태를 평가하는 성인 환자와는 다르게 성장기 아동에서는 발육단계에 따라 수평 기준선이 변화될 수 있으므로 이를 고려한 수평 기준선의 설정이 필요할 것이다. 이에 본 연구에서는 성장기 아동의 골성숙도와 부정교합군 및 성별에 따른 Sella-Nasion (SN) 평면과 Frankfort-Horizontal(FH)평면이 이루는 각도와 FH평면과 다른 수평면 간의 관계를 조사하기 위해 교정치료를 받은 경험이 없는 성장기 남녀 아동 540명을 대상으로 수완부골 방사선 사진과 측모두부 방사선 사진을 촬영하였으며, SMA(Skeletal Maturity Assessment)를 이용하여 골성숙도에 따라 SMI 1-4를 A군, SMI 5-7을 B군, SMI 8-11을 C군으로 분류하고, 측모두부규격 방사선 사진 계측결과 부정교합 분류에 따라 골격성 I급 부정교합군, 골격성 II급 부정교합군, 골격성 III급 부정교합군의 세 군으로 분류한 후 10개의 항목을 평가하여 다음과 같은 결론을 얻었다. 1 SN 평면과 FH 평면이 이루는 각도는 골성숙도와 부정교합 및 성별에 따른 차이를 보이지 않았다. 2. SN 평면과 FH 평면이 이루는 각도는 남자는 $8.27^{\circ}{\pm}2.31^{\circ}$, 여자는 $8.59^{\circ}{\pm}2.24^{\circ}$, 전체에서는 $8.42^{\circ}{\pm}2.28^{\circ}$였다. 3. FH 평면과 구개평면이 이루는 각은 골성숙도, 부정교합 및 성별에 따른 차이를 보이지 않고 비교적 일정하였다. ($1.09^{\circ}{\pm}3.21^{\circ}$).

• 대한치과교정학회지
• /
• 제54권2호
• /
• pp.108-116
• /
• 2024

Objective: A three-dimensional-printed individual titanium plate was applied for maxillary protraction to eliminate side effects and obtain the maximum skeletal effect. This study aimed to explore the stress distribution characteristics of sutures during maxillary protraction using individual titanium plates in various directions and locations. Methods: A protraction force of 500 g per side was applied at forward and downward angles between 0° and 60° with respect to the Frankfort horizontal plane, after which the titanium plate was moved 2 and 4 mm upward and downward, respectively. Changes in sutures with multiple protraction directions and various miniplate heights were quantified to analyze their impact on the maxillofacial bone. Results: Protraction angle of 0-30° with respect to the Frankfort horizontal plane exhibited a tendency for counterclockwise rotation in the maxilla. At a 40° protraction angle, translational motion was observed in the maxilla, whereas protraction angles of 50-60° tended to induce clockwise rotation in the maxilla. Enhanced protraction efficiency at the lower edge of the pyriform aperture was associated with increased height of individual titanium plates. Conclusions: Various protraction directions are suitable for patients with different types of vertical bone surfaces. Furthermore, when the titanium plate was positioned lower, the protraction force exhibited an increase.

• 대한치과의사협회지
• /
• 제11권2호
• /
• pp.134-138
• /
• 1973

The author measured and analyzed the condyle path inclinations of 25 normal Korean adults roentgeno-cephalometrically and following conclusions were obtained. In protrusive movement of mandible, the angle of condyle pation inclination in relation to 1) occlusal plane is 19.86±8.25, 2) Frankfort Horizontal plane is 28.32±8.56, 3) Camper line is 12.22±4.06, 4) Nasion-sella line is 36.80±8.54.