• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.1
• /
• pp.55-62
• /
• 2017

The SRP (Solar Radiation Pressure) model has always been an issue in the dynamic GPS (Global Positioning System) orbit determination. The widely used CODE (Center for Orbit Determination in Europe) model and its variants have nine parameters to estimate the solar radiation pressure from the Sun and to absorb the remaining forces. However, these parameters show a very high correlation with each other and, therefore, only several of them are estimated at most of the IGS (International GNSS Service) analysis centers. In this study, we attempted to numerically verify the correlation between the parameters. For this purpose, a bi-directional, multi-step numerical integrator was developed. The correlation between the SRP parameters was analyzed in terms of post-fit residuals of the orbit. The integrated orbit was fitted to the IGS final orbit as external observations. On top of the parametric analysis of the SRP parameters, we also verified the capabilities of orbit prediction at later time epochs. As a secondary criterion for orbit quality, the positional discontinuity of the daily arcs was also analyzed. The resulting post-fit RMSE (Root-Mean-Squared Error) shows a level of 4.8 mm on average and there is no significant difference between block types. Since the once-per-revolution parameters in the Y-axis are highly correlated with those in the B-axis, the periodic terms in the D- and Y-axis are constrained to zero in order to resolve the correlations. The 6-hr predicted orbit based on the previous day yields about 3 cm or less compared to the IGS final orbit for a week, and reaches up to 6 cm for 24 hours (except for one day). The mean positional discontinuity at the boundary of two 1-day arcs is on the level of 1.4 cm for all non-eclipsing satellites. The developed orbit integrator shows a high performance in statistics of RMSE and positional discontinuity, as well as the separations of the dynamic parameters. In further research, additional verification of the reference frame for the estimated orbit using SLR is necessary to confirm the consistency of the orbit frames.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.4
• /
• pp.182-190
• /
• 2020

This study reports a series of drop impact tests performed to generate denting damages on stiffened plates and their residual ultimate strength tests under axial compression. The models were fabricated of general structural steel, and each model has six longitudinal stiffeners and two transverse frames. Among six fabricated models, four were damaged, and two were left intact for reference. To investigate the effects of collision velocity and impact location on the extent of damage, the drop height and the impact location were changed in each impact test. After performing the collision tests, the ultimate axial compression tests were conducted to investigate the residual strengths of the damaged stiffened plates. Finite element analyses were also carried out using a commercial package Abaqus/Explicit. The material properties obtained from a quasi-static tensile tests were used, and the strain-rate sensitivity was considered. After importing the collision simulation results, the ultimate strength calculations were carried out and their results were compared with the test data for the validation of the finite element analysis method.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.215-216
• /
• 2014

This paper proposes a control algorithm for permanent magnet synchronous generator with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage offshore wind power system under unbalanced grid conditions. The proposed control algorithm particularly compensates for the unbalanced grid voltage at the point of common coupling in a collector bus of offshore wind power system. This control algorithm has been formulated based on the symmetrical components in positive and negative rotating synchronous reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power are described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of ac input current is injected to the point of common coupling in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm makes it possible to provide a balanced voltage at the point of common coupling resulting in the generated power of high quality from offshore wind power system under unbalanced network conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2015

This paper proposes a control algorithm for permanent magnet synchronous generators with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage off-shore wind power system under unbalanced grid conditions. Specifically, the proposed control algorithm compensates for unbalanced grid voltage at the PCC (Point of Common Coupling) in a collector bus of an off-shore wind power system. This control algorithm has been formulated based on symmetrical components in positive and negative synchronous rotating reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power is described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of AC input current is injected into the PCC in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm enables the provision of balanced voltage at the PCC resulting in the high quality generated power from off-shore wind power systems under unbalanced network conditions.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.258-265
• /
• 2004

Numerous genes of Escherichia coli have been shown to growth phase-dependent expression throughout growth. The global patterns of growth phase-dependent gene expression of E. coli throughout growth using oligonucleotide microarrays containing a nearly complete set of 4,289 annotated open reading frames. To determine the change of gene expression throughout growth, we compared RNAs taken from timecourses with common reference RNA, which is combined with equal amount of RNA pooled from each time point. The hierarchical clustering of the conditions in accordance with timecourse expression revealed that growth phases were clustered into four classes, consistent with known physiological growth status. We analyzed the differences of expression levels at genome level in both exponential and stationary growth phase cultures. Statistical analysis showed that 213 genes are shown to, growth phase-dependent expression. We also analyzed the expression of 256 known operons and 208 regulatory genes. To assess the global impact of RpoS, we identified 193 genes coregulated with rpoS and their expression levels were examined in the isogenic rpoS mutant. The results revealed that 99 of 193 were novel RpoS-dependent stationary phase-induced genes and the majority of those are functionally unknown. Our data provide that global changes and adjustments of gene expression are coordinately regulated by growth transition in E. coli.

• Journal of the Korean Society of School Health
• /
• v.12 no.1
• /
• pp.71-84
• /
• 1999

This study attempts to identify the self-image of eyeglass wearers with Q-methodology. Preliminary Q-statements were collected through personal and telephone interviews and based in consultation with reference books, eyeglass wearers, an optician and an oculist. Finally, 34 Q-samples were seleted. The results were analyzed by a Q-factor with a PC QUANL Program. The self-image of eyeglass wearers were found to revolve around three types: Type 1. They feel that eyeglasses have a negative influence on image and that they uncomfortable. In addition, other people have a negative bias toward people who wear eyeglasses. As a result of these negative prejudices and inconveniences, there is a tendency to wear contact lens or have laser operations. Type 2. They feel less uncomfortable comparatively, when explained that glasses can help improve their image. When explained as a fashion accessory, negative prejudices almost disappeared. Type 3. They show a positive reaction when explained that spectacles are also used for sight protection. Howerer, they are sensitive to changes in their complexion as a result of eyeglass wear and place much importance in the design of glass frames. The significance of this study is to suggest basic data for a mediation device that improve the image of eyeglass wearers discovery and analysis of these three types.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.50-56
• /
• 2016

This paper proposes the architecture and design of intra prediction circuit for a multi-decoder supporting UHD images. The proposed circuit supports not only the latest video compression standard HEVC but also H.264. In addition to the basic function of performing intra prediction, this circuit has the capability of performing the reference sample filter operation defined in the H.264 standard, and the smoothing and strong sample filter operations defined in the HEVC standard. We reduced the circuit size by sharing the circuit blocks for common operations and internal storage, and improved the circuit performance by parallel processing. The proposed circuit was described at RTL using Verilog HDL and its functionality was verified by using NC-Verilog of Cadence. The RTL circuit was synthesized by using Design Compiler of Synopsys and 130nm standard cell library. The synthesized gate-level circuit consists of 69,694 gates and processes 100 ~ 280 frames per second for 4K-UHD HEVC images at the maximum operation frequency of 157MHz.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.248-254
• /
• 2014

The purpose of this study is to figure out how uptake counts of technetium ($^{99m}Tc$) among radioisotopes in the human body are affected if computed tomography (CT), magnetic resonance imaging (MRI) and isotope examination are performed consecutively. $^{99m}Tc$ isotope material, iodinated contrast media for CT and paramagnetic contrast media for magnetic resonance (MR) were used as experimental materials. First, $^{99m}Tc$ was added to 4 cc normal saline in a test tube. Then, 2 cc of CT contrast media such as $Iopamidol^{(R)}$ and $Dotarem^{(R)}$ were diluted with 2 cc normal saline, and 2cc of MRI contrast media such as $Primovist^{(R)}$ and $Gadovist^{(R)}$ were diluted with 2 cc normal saline. Each distributed contrast media was a total of 4 cc and included 10m Ci of $^{99m}Tc$. A gamma camera, a LEHR (Low energy high resolution) collimator and a pin-hole collimator were used for image acquisition. Image acquisition was repeated a total of 6 times and 120 frames were obtained and uptake counts of $^{99m}Tc$ were measured (from this procedure). In this study, as a result of measuring the uptake counts of $^{99m}Tc$ using the LEHR collimator, the uptake counts were less measured in all contrast media than normal saline as a reference. In particular, the lowest uptake counts were measured when $Gadovist^{(R)}$, contrast media for MRI, was used. However, the result of measuring the uptake counts of $^{99m}Tc$ using the pin-hole collimator showed higher uptake counts in all contrast media, except for $Iopamidol^{(R)}$, than normal saline as a reference. The highest uptake counts were measured particularly when $Primovist^{(R)}$, contrast media for MRI, was used. In performing the gamma camera examination using contrast media and $^{99m}Tc$, it is considered significant to check the changes in the uptake counts to improve various diagnosis values.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.446-457
• /
• 2017

In order to reduce the size of frame memory or bus bandwidth, frame memory compression (FMC) recompresses reconstructed or reference frames of video codecs. This paper proposes a novel FMC design based on discrete wavelet transform (DWT) - set partitioning in hierarchical trees (SPIHT), which supports fine-scalable throughput and is area-efficient. In the proposed design, multi-cores with small block sizes are used in parallel instead of a single core with a large block size. In addition, an appropriate pipelining schedule is proposed. Compared to the previous design, the proposed design achieves the processing speed which is closer to the target system speed, and therefore it is more efficient in hardware utilization. In addition, a scheme in which two passes of SPIHT are merged into one pass called merged refinement pass (MRP) is proposed. As the number of shifters decreases and the bit-width of remained shifters is reduced, the size of SPIHT hardware significantly decreases. The proposed FMC encoder and decoder designs achieve the throughputs of 4,448 and 4,000 Mpixels/s, respectively, and their gate counts are 76.5K and 107.8K. When the proposed design is applied to high efficiency video codec (HEVC), it achieves 1.96% lower average BDBR and 0.05 dB higher average BDPSNR than the previous FMC design.

• Journal of the Korean earth science society
• /
• v.30 no.3
• /
• pp.381-397
• /
• 2009

The Modem Geodesy monitors physical and geometrical shape and motion of the Earth and, more importantly, its temporal variations with unprecedented precision. It provides accurate and stable reference frames for Earth observations in the Space era. Furthermore, with an aid of interdisciplinary approaches, it also traces the causes of the variations in shape and motion of the Earth and eventually contributes to a better understanding of the Earth system. The International Association of Geodesy (IAG) has established the Global Geodetic Observing System (GGOS) to integrate the multitude of geodetic tools and tried to contribute to the management of global environmental changes as a partner of the Global Earth Observation System of Systems (GEOSS). Here we introduce the contribution of geodesy to the various fields of Earth Science by focusing on GGOS and encourage interdisciplinary researches.