• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.514-519
• /
• 2020

Graphite materials for lithium ion battery anode materials are the most commercially available due to their structural stability and low price. Recently, research efforts have been conducted on carbon coatings by improving side reactions at the edge site of carbon materials. The carbon coating process has classified into a CVD by chemical reaction, wet coating process with solvent and dry coating by mechanical impact. In this paper, the rapid crush/coating process was used to solve the problem of which only few parts of the carbon precursor (pitch) can be used and also environmental problems caused by solvent removal in the wet coating process. When the ratio of needle coke to pitch was 8 : 2 wt%, and the rapid crush/coating process was carried out, it was confirmed that the fracture surface was coated by pitch. The pitch-coated sample was treated at 2400 ℃ and 41.8% improvement in 10C/0.1C rate characteristic was observed. It is considered that the material simply manufactured through the simple crush/coating process can be used as an anode electrode material for a lithium ion battery.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.66-72
• /
• 2012

Autogenous tooth transplantation can be defined as the surgical movement of a tooth from one position in the mouth to another in the same individual. The most common reasons for tooth transplantation include replacement of a missing first molar, transplantation of impacted canines to their normal positions in the arch, and transplantation of premolars in areas of missing teeth, especially in the anterior area of the mouth. The key to successful tooth transplantation is proper selection of graft with adequate root development as well as the design of surgical operation. Root development stage with half to three-quarter-developed roots increase the success rate of autotransplantation. We report the cases of successful autotransplantation which resulted in ideal healing of periodontal ligament, gingiva and alveolar bone. All transplanted teeth presented immature root formation at the moment of the procedure. After surgical procedure, we can observe good healing pattern without endodontic problem.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.87-101
• /
• 2012

Bruxism is extensively defined as a diurnal or nocturnal parafunctional habit of tooth clenching or grinding. The etiology of bruxism may be categorized as central factors or peripheral factors and according to previous research results, central factors are assumed to be the main cause. Bruxism may cause tooth attrition, cervical abfraction, masseter hypertrophy, masseter or temporalis muscle pain, temporomandibular joint arthralgia, trismus, tooth or restoration fracture, pulpitis, trauma from occlusion and clenching in particularly may cause linea alba, buccal mucosa or tongue ridging. An oral appliance, electromyogram or polysomnogram is used as a tool for diagnosis and the American Sleep Disorders Association has proposed a clinical criteria. However the exact etiology of bruxism is yet controversial and the selection of treatment should be done with caution. When the rate of bruxism is moderate or greater and is accompanied with clinical symptoms and signs, treatment such as control of dangerous factors, use of an oral appliance, botulinum toxin injection, pharmacologic therapy and biofeedback therapy may be considered. So far, oral appliance treatment is known to be the most rational choice for bruxism treatment. For patients in need of esthetic correction of hypertrophic masseters, as well as bruxism treatment, botulinum toxin injection may be a choice.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.4
• /
• pp.356-360
• /
• 2005

Background : This study examined the clinical utility of using indirect chest radiography during a physical examination of new conscripts for determine the presence of pulmonary tuberculosis. Methods : Over an eight-month period, this study examined 25386 people who underwent a physical examination after conscription. The abnormal findings on mass miniature radiography were followed-up using direct chest radiography. The positive predictive value of mass miniature radiography and direct chest radiography was compared. The incidence, degree of infiltration and clinical outcome of active pulmonary tuberculosis were also evaluated during a follow-up examination. Results : The positive rate of mass miniature radiography was 1.19% (n=302). Various lesions were identified: Parenchymal lesions (n=109), mediastinal lesions (n=6), cardiovascular lesions (n=45), pleural lesions (n=49), bony lesions (n=90) and miscellaneous lesions (n=7). The incidence of active pulmonary tuberculosis by mass miniature radiography was 0.26% (n=67). The first diagnosis was made in 50 people; active pulmonary tuberculosis (n=42), pneumonia (n=1), a mediastinal mass (n=1), a rib fracture (n=2) and a pneumothorax (n=4). Most cases of active pulmonary tuberculosis were mildly infiltrated and either improved or were cured by the follow-up examination. Conclusion : Although mass miniature radiography in a physical examination after conscription has limitations, but it is a useful means for detecting the presence of early disease, particularly in active pulmonary tuberculosis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.199-206
• /
• 2014

The number of reported traumatic injuries has been increasing in recent years, particularly that of dental trauma in children and adolescents. While the risks associated with dental trauma in this population have been increasingly realized, domestic reports on this issue seem to be insufficient. The purpose of this study was to investigate the prevalence of dental trauma and to evaluate the relevant risk factors and the level of self-recognition. 1,371 adolescents attending middle schools at Yangsan were surveyed via clinical examination and questionnaire; the results were as follows: According to the clinical examination, the overall prevalence of dental trauma was 16.8% with preponderance of males (19.2%) compared to females (13.7%) (p < 0.05). The average number of injured teeth per adolescent with a history of trauma was 1.34. Comparing the prevalence, maxillary central incisors and enamel fracture occupied the highest ranks by tooth type and mode of trauma, respectively. Class II division 1 malocclusion and overjet exceeding 8.0 mm were identified as significant risk factors (p < 0.05). The degree of self-recognition of dental trauma showed a low coincidence rate compared with results of the clinical examination. Males expressed a higher level of satisfaction toward the results of treatment for dental trauma than females (p < 0.05).

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.97-107
• /
• 2006

The recycled polyethylene composites with various ratio of ground waste tire powder were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of waste tire scrap. In this investigation, the ground waste tire powders (GWTP) were blended with virgin HDPE and recycled polyethylene in the weight ratio of 0 to 50 wt.%. Mechanical properties such as tensile strength, elongation at break and impact strength were measured by using ASTM standard. The experimental results for the various composite showed that the tensile strength of composites decreased with increasing GWTP ratio, while elongation at break increased with the amounts of GWTP. On the other hand, the impact strength for the three kinds of composites showed maximum at the 30 wt.% of GWTP and then decreased. Morphology of the fracture surface tends to be rough with increasing waste tire powder content. Rheological properties were investigated by measuring the shear viscosity against shear rates and softening temperatures. They showed that melt viscosity of rubber composites in this study subsequently increased with increasing GWTP content as a result of increase of flow resistance against external stress and followed a Power-law behavior.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.106-113
• /
• 2011

The object of this clinical study was to evaluate the short-term outcome of modified resin-bonded fixed partial dentures which utilizes the original tooth undercuts and different path of insertion of components. Materials and methods: 71 units of modified RBFPDs that were used in 21 patients at the Department of Prosthodontics, College of Dentistry, Yonsei University were evaluated. The follow-up period was up to 25 months, the mean being 7 months. Survival rate, mobility, percussion, probing depth, bleeding on probing, plaque index was recorded and radiographs were taken to monitor alveolar bone loss. Results & Conclusion: Within the limits of this short term retrospective study, it was concluded that: 1. No mechanical failure such as debonding or fracture of the framework was found during the follow-up period. 2. The periodontal apparatus was stable and no clinical change was observed after prosthetic treatment. 3. No significant marginal bone loss was found in the radiographic evaluation.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.215-226
• /
• 2000

In order to map the acoustic basement and to locate fracture zones in the Galgok fault, seismic refraction data were acquired near the Chonbuk ranch in Gyeongju. Along three profiles of 72m(Line 1), 72m(Line 2), and 36m(Line 3) long, seismic signals were generated by a 5kg hammer. The refraction data were collected by employing twelve 8 Hz geophones at an interval of 3m and recording time of 192ms at a sampling rate of 0.2ms. The data are interpreted using GRM method. The top layer (Layer 1) is characterized as the velocity of approximately250 m/s and thickness of approximately 2.1m. This layer is regarded as a soil layer. Underneath Layer 1 lies unconsolidated layer (Layer 2) whose refraction velocity is determined to be $1,030{\sim}1,400m/s$. Layer 2 is approximately 4.6m thick and is regarded as a Quaternary gravel layer. The third layer (Layer 3) has the mean refraction velocity of $2,100{\sim}2,200m/s$ and is interpreted to be the acoustic basement. In some parts of Lines 1 and 3, the difference in depth to the top of Layer 2 is greater than 20 cm indicating the possibility of existence of Quaternary faults. Along Line 3 and the eastern part of Line 1, refracted energy from the acoustic basement was not recorded. This may highly indicate that a relatively large scale fault exists under the western part of Line 1.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.11-23
• /
• 2020

This study aims to investigate breakage and liberation characteristics of iron ore from Shinyemi mine, Jeongseon by ball mill. Parameters of breakage functions for three grade samples of iron ore were obtained using single-sized-feed breakage test and back-calculation based on nonlinear programming. The results showed that with the increase in the grade of iron ore, the breakage rate factor decrease whereas the particle size sensitivity decreases. This results from retardation of microcrack-propagation by magnetite grain in the ore. Breakage distribution analysis showed that the breakage mechanism appear to be impact fracture dominant with the increase of grade owing to the stress distribution effect by magnetite grain. Degree of liberation (DOL) increased with the increase in grade and decrease in particle size, respectively. Using the breakage function and size-DOL relationship, a model that can predict time-dependent-DOL is established. When scale-up factors from operating condition are available, the model is expected to be capable of predicting size and DOL with time in actual mining process.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.239-246
• /
• 2011

Groundwater in small islands is used as main water resource but the overuse of groundwater may cause seawater intrusion and temperature decrease in geothermal wells. This study aimed to characterize the hydrogeology of Maeum-ri area in Seokmo Island of Ganghwagun using long-term monitoring at groundwater wells and geothermal wells. In the monitoring period seasonal water level change, consistent drop or increase of water levels are not detected. The groundwater temperature about 10m below ground surface shows year cycle variation having two to five months difference with ambient temperature cycle. The storativity was calculated by tidal method. The storativity estimated by adapting tidal efficiency factor showed some larger values than that by using tidal time lag. The result suggested that the tidal method assuming several assumptions on aquifer condition may produce broad ranges but the calculated ranges at this application are reasonable. The similar shape of groundwater level change and tidal effects was observed at several wells clustered east-south-east direction which may implicate the distribution of vertical fracture system strongly related with groundwater flow channels. The applied methodology and study results will bc valuable to evaluate optimal pumping rate for the preservation of groundwater resources, and to manage geothermal development.