• 열처리공학회지
• /
• 제7권4호
• /
• pp.298-306
• /
• 1994

This study was performed to investigation the effect of austempering temperature on the mecanical properties and fracture Characteristic of the ductile cast iron with contains Cu and Mo. The obtained results of this study were as follows; Microstructure of austemped ductile cast iron obtained by austempering were low bainite with some martensite at $250^{\circ}C$, mixture of low and upper bainite at $300^{\circ}C$ and upper bainite at $350^{\circ}C$. With increasing austempering temperature, yield strength, tensile strength and hardness decreased, while the elongation and impact absorption energy increased. With increasing austempering temperature, fracture toughness value increased and mainly controlled by bolume fraction of retained austenite. The volume fraction of retained austenite increased and the fracture surface obtained fibrous and dimple with increasing austempering temperature.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.67-80
• /
• 1989

복합적층 구조물의 체결특성을 연구하기에 앞서 구조물 제작시 필연적으로 대두되는 원공이 있는 적층판의 기 제시된 몇 가지 파괴해석 모델을 고찰하고, 파괴특성을 알아 보았다. 또한, 원공이 있는 단일방향 복합재료와 $[{\pm}45^{\circ}]2s,\;[0^{\circ}/90^{\circ}]2s,\;[{\pm}45^{\circ}/0^{\circ}/90^{\circ}]s$ 적층판의 시편실험 결과를 이용, 특성길이를 계산하여 파손강도를 예측하고자 했다. AE(Acoustic Emission) 실험평가는 주로 손상의 발생과 거동을 추적하여 파손과정을 평가하는 방법으로 사용했고 Ultrasonic 시험법은 초기 손상검출, 손상 영역의 크기를 규명하고자 했다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1285-1293
• /
• 1992

본 연구에서는 glass/epoxy 직조된 복합재료에 있어서 원공 및 판폭의 크기가 노치강도에 미치는 영향을 명확히 하고, 또한 노치강도 및 파괴조건과 위에서 언급한 특성길이와의 관계를 검토하였다.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.101-109
• /
• 2008

수분에 기인한 화강풍화토의 압축성 변화정도를 명확히 밝히기 위하여 풍화도가 서로 다른 3종류의 화강풍화토와 실리카를 이용해, 기건상태와 습윤상태에서 단입자파쇄시험과 일차원압축시험을 실시했다. 실험결과, 입자가 침수됨에 따라 입자표면의 강도를 나타내는 제1파쇄강도가 현저히 저하되고, 일차원적인 압축성이 증가되는 것이 확인되었다. 이와 같은 결과는 입자가 침수됨에 따라 입자강도가 저하되어 입자파쇄가 증가하는 것에 기인하는 것으로 평가되었다.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.30-35
• /
• 2002

The fractal geometry is a non-Euclidean geometry which describes the naturally irregular or fragmented shapes, so that it can be applied to fracture behavior of materials to investigate the fracture process. Fractal curves have a characteristic that represents a self-similarity as an invariant based on the fractal dimension. This fractal geometry was applied to the crack growth of cementitious composites in order to correlate the fracture behavior to microstructures of cementitious composites. The purpose of this study was to find relationships between fractal dimensions and fracture energy. Fracture test was carried out in order to investigate the fracture behavior of plain and fiber reinforced cement composites. The load-CMOD curve and fracture energy of the beams were observed under the three point loading system. The crack profiles were obtained by the image processing system. Box counting method was used to determine the fractal dimension, D$_{f}$. It was known that the linear correlation exists between fractal dimension and fracture energy of the cement composites. The implications of the fractal nature for the crack growth behavior on the fracture energy, G$_{f}$ is apparent.ent.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.84-91
• /
• 1996

A fractal analysis on fracture surface of aluminium-particulate SiC composites was attempted. As the volume fraction of SiC in composites increases, the fractal dimension tends to increase. However, no correlation between the fractal dimension and the fracture toughness in terms of critical energy release rate was observed. Since the fractal dimension represents the roughness of fracture surface, the fracture toughness would be a function of not only fracture surface roughness but also additional parameters. Thus the applicability of fractal analysis to the estimation of fracture toughness must depend on the proper choice and interpretation of additioal paramerters. In this paper, the size of characteristic strctural unit for fracture was considered as an additional parameter. As a result, the size appeared to be a function of only volume fraction of SiC. Finally, a master curve for fracture toughness of aluminium-particulate SiC composites was proposed as a function of fractal dimension and volume fraction of SiC.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.564-571
• /
• 1985

본 논문에서는 미시조직인자를 변화시킨 마르텐사이트-페라이트 복합조직강을 준비하여 균열선단 및 안정영역의 파괴양상과 파괴저항과의 관계를 검토하였다.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.71-78
• /
• 1998

Real crack and fracture surfaces have irregularities producing zigzag contours. These irregularities are analysed by a fractal geometry which has been by a Mandelbrot. We obtained a fractal dimension which is one of the fractal characteristics. It is also estimated by an vertical section method that fractal characteristics in the fractured surfaces can be obtained as the crack grows. Moreover fractal fracture energy that corresponds to an energy release rate is shown to find relationships between fractal dimensions and crack behaviors. From these results, we concluded that a fractal characteristics analysis for a crack can be applied to a fracture mechanics.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.132-138
• /
• 1999

In order to investigate the toughening characteristic by microcrack formation in ceramic composites, $Al_2$O$_3$/(0~20)vol% YAG composites containing equiaxed second grains were fabricated using$ Al_2$$O_3$ during hot-pressing. AE(acoustic emission) measurements have been coupled with fracture toughness experiments of SENB method, to evaluate the microcrack formation and the improvement in fracture toughness of ceramic composites. Formation of microcrack was detected by Ae. The generation of AE events increased with increasing of load when load was applied at specimen. The AE events are generated mainly around at maximum load. Specially, the detected AE evetns of composites are many as compared with monolithic $Al_2$$O_3$. Fracture toughness of composites was improved than that of monolithic alumina. $Al_2$O$_3$/YAG composites exhibit main toughening effects by microcracking, results from mutual coalesence of microcracks being generated under applied load. However, there are few toughening mechanism like microcracking in monolithic alumina.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.832-837
• /
• 2001

In this paper, we analyzed the characteristic of the broken section for bolts fastening the generator casing, and according to the frequency analysis, we grasped the characteristic of the excited force, traced the path of the exciting source so that we examined a factor of transient vibration of the generator casing. Even if it appears transient vibration again, we applied spring washer and more tensile bolt to the casing to minimize the fracture. By solving troubles of the generator rotor, we reduced the vibration amplitude to the normal condition. So we obtain much more the reliablility of the generator.