• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.308-316
• /
• 2002

The cavitation erosion behavior of wear-resistant hardfacing alloys such as Co-base Stellite 6, Fe-base Norem 02 and new Fe-base alloy were investigated up to 50 hours by using a 20kHz vibratory cavitation erosion test equipment. The crack, initiated easily at the interfaces between matrix and hard second phase, was repressed effectively in Stellite 6 because the matrix was hardened by phase transformation. For this reason, Stellite 6 showed an excellent cavitation erosion resistance compared to Norem 02. The phase transformation also occurred in Norem 02, but the increase of volume fraction of the interfaces caused the crack to be initiated frequently, thus resulting in a 1arge material loss. The matrix of NewAlloy was hardened effectively by vlongrightarrow$\alpha$' phase transformation and the volume fraction of the interfaces was very small compared to Norem 02. This caused the propagation of crack to the matrix to be repressed effectively. Therefore, NewAlloy showed a very excellent cavitation erosion resistance. It wasn't considered that the cavitation erosion resistance of NewAlloy was influenced the temperature of the bath filled with a distilled water up to $80^{\circ}C$.

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.348-353
• /
• 2007

In the present study, Zr-base metallic glass (MG) and Zr-base BMG/diamond composites were fabricated using a combination of gas atomization and spark plasma sintering (SPS). The microstructure, thermal stability and mechanical property of both the specimens as atomized and sintered were investigated. The experimental results showed that the SPSed specimens could be densified into nearly 100% and maintained the initial thermal stability at the sintering temperature of 630K. In addition, MG/diamond powder composites were successfully synthesised using SPS process. The composites, even a very low diamond volume fraction, generated a significant increase in compressive strength. With increasing the diamond volume fraction, the compressive strength was also increased due to the addition of hardest diamonds. It suggests that these composites would be potential candidates for a new cutting tool material.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.126-131
• /
• 2018

In the present study, we investigate the effects of milling time and the addition of a process control agent (PCA) on the austenite stability of a nanocrystalline Fe-7%Mn alloy by XRD analysis and micrograph observation. Nanocrystalline Fe-7%Mn alloys samples are successfully fabricated by spark plasma sintering. The crystallite size of ball-milled powder and the volume fraction of austenite in the sintered sample are calculated using XRD analysis. Changes in the shape and structure of alloyed powder according to milling conditions are observed through FE-SEM. It is found that the crystallite size is reduced with increasing milling time and amount of PCA addition due to the variation in the balance between the cold-welding and fracturing processes. As a result, the austenite stability increased, resulting in an exceptionally high volume fraction of austenite retained at room temperature.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2304-2311
• /
• 2021

The dislocation density in strain-hardened Alloy 690 was analyzed using scanning transmission electron microscopy (STEM) to study the relationship between the local plastic strain and susceptibility to primary water stress corrosion cracking (PWSCC) in nuclear power plants. The test material was cold-rolled at various thickness reduction ratios from 10% to 40% to simulate the strain-hardening condition of plant components. The dislocation densities were measured at grain boundaries (GB) and in grain interiors of strain-hardened specimens from STEM images. The dislocation density in the grain interior monotonically increased as the strain-hardening proceeded, while the dislocation density at the GB increased with strain-hardening up to 20% but slightly decreases upon further deformation to 40%. The decreased dislocation density at the GB was attributed to the formation of deformation twins. After the PWSCC growth test of strain-hardened Alloy 690, the fraction of intergranular (IG) fracture was obtained from fractography. In contrast to the change in the dislocation density with strain-hardening, the fraction of IG fracture increased remarkably when strain-hardened over 20%. From the results, it was suggested that the PWSCC growth behavior of strain-hardened Alloy 690 not only depends on the dislocation density, but also on the microstructural defects at the GB.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.6
• /
• pp.949-956
• /
• 2020

Objective: This study was conducted to confirm the effects of new inoculants producing-antifungal or esterase substances on rye silage and its rumen fermentation indices by comparing wild with mutated types. Methods: Rye harvested at dough stage was ensiled into 3 L mini bucket silo (1 kg) for 90 d in triplicate following: distilled water at 20 μL/g (CON); Lactobacillus brevis 100D8 (AT) and its inactivation of antifungal genes (AT-m) at 1.2×10⁵ cfu/g, respectively; and Leuconostoc holzapfelii 5H4 (FD) and its inactivation of esterase genes (FD-est) at 1.0×10⁵ cfu/g, respectively. After silo opened, silage was sub-sampled for the analysis of ensiling quality and its rumen fermentation indices. Results: Among the wild type inoculants (CON vs AT vs FD), FD inoculant had higher (p<0.05) in vitro digestibilities of dry matter and neutral detergent fiber, the total degradable fraction, and total volatile fatty acid in rumen, while AT inoculant had higher (p<0.05) lactate, acetate, and lactic acid bacteria in silage. Silage pH and the potentially degradable fraction in rumen increased (p<0.05) by inactivation of antifungal activity (AT vs AT-m), but lactate, acetate, and lactic acid bacteria of silage decreased (p<0.05). In silage, acetate increased (p<0.05) by inactivation of esterase activity (FD vs FD-est) with decreases (p<0.05) of pH, ammonia-N, lactate, and yeast. Moreover, inactivation of esterase activity clearly decreased (p<0.05) in vitro digestibilities of dry matter and neutral detergent fiber, the total degradable fraction, and total volatile fatty acid in the rumen. Conclusion: This study concluded that FD inoculant confirmed esterase activity on rye silage harvested at dough stage, while AT inoculant could not be confirmed with antifungal activity due to the absence of mold in all silages.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.21-29
• /
• 2001

The general topology optimization can be considered as optimal material distribution. Such an approach can be unstable, unless composite materials are introduced. In this research, a nodal volume fraction method is used to obtain the optimum topology of continuum structures. This method is conducted from a composite material model composed of isotropic matter and spherical void. Because the appearance of the chessboard patterns makes the interpretation of the optimal material layout very difficult, this method contains a chessboard prevention strategy. In this research, several topology optimization problems are presented to demonstrate the validity of the present method and the recursive quadratic programming algorithm is used to solve the topology optimization problems.

• Education of Primary School Mathematics
• /
• v.25 no.2
• /
• pp.179-195
• /
• 2022

Mathematical communication competency, one of the six mathematical competencies emphasized in the latest mathematics curriculum, plays an important role both as a means and as a goal for students to learn mathematics. Therefore, it is meaningful to find instructional methods to improve students' mathematical communication competency and analyze their communication competency in detail. Given this background, this study analyzed 64 sixth graders' mathematical communication competency after they participated in the lessons of fraction division emphasizing mathematical communication. A written assessment for this study was developed with a focus on the four sub-elements of mathematical communication (i.e., understanding mathematical representations, developing and transforming mathematical representations, representing one's ideas, and understanding others' ideas). The results of this study showed that students could understand and represent the principle of fraction division in various mathematical representations. The students were more proficient in representing their ideas with mathematical expressions and solving them than doing with visual models. They could use appropriate mathematical terms and symbols in representing their ideas and understanding others' ideas. This paper closes with some implications on how to foster students' mathematical communication competency while teaching elementary mathematics.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.6
• /
• pp.412-418
• /
• 2019

Background: Previously, studies have observed that the leaf extract of Cotoneaster wilsonii Nakai has potent antioxidant and anti-inflammatory activites. Therefore, further research was conducted to separate the active antioxidant and anti-inflammatory compounds in the leaf of the C. wilsonii. Methods and Results: The anti-oxidant effects were evaluated by analyzing the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, estimating the totla phenolic content (TPC) and total flavonoid content (TFC), and using reducing power assay method. The ethyl acetate (EtOAc) fraction demonstrated the highest DPPH radical scavenging activity (IC₅₀; 9.69 ㎍/㎖), and the highest TPC and TFC (345.98 mg·GAE/g, and 74.23 mg·QE/g). Moreover, it indicated the highest effects on nitric oxide production. Therefore, the active compound was separated using the EtOAc fraction, determined on the basis of spectral data, and identified as (+)-catechin. Conclusions: The first compound separated was made from the leaf of C. wilsonii was (+)-catechin, which produced potent anti-oxidant and anti-inflammatory effects.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1090-1095
• /
• 2014

Anthocyanins, a class of flavonoids, are natural water-soluble pigments, which are mainly found in vegetables and fruits. Anthocyanins have attractive pharmacological activities, such as anti-oxidant, anti-inflammatory, anti-cancer, and anti-diabetic. The purpose of this study was to investigate the protective effects of anthocyanins-rich fraction (ANF) from Korean purple sweet potato variety, "Shinjami", against hydrogen peroxide ($H_2O_2$)-induced oxidative stress. In our results, pre-treatment of HepG2 cells with ANF ($10{\mu}g/mL$) significantly prevented cell death and maintained cell integrity, following exposure to 0.9 mM hydrogen peroxide. The $H_2O_2$-dependent production of intracellular ROS was also significantly decreased by pre-treatment with ANF (6 h, $10{\mu}g/mL$). In addition, ANF increased the mRNA levels of antioxidant enzymes, catalase and glutathione level in $H_2O_2$-treated HepG2 cells. These results indicated that ANF protected HepG2 cells against $H_2O_2$-induced oxidative stress by inducing protective system.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.6
• /
• pp.264-271
• /
• 2016

The effect of the oxygen content and the annealing temperature on the tensile behavior of the Ti-1.5Al-3Fe-0.25Si-(0.1~0.5)O alloy was investigated. The tensile properties were dependent on the volume fraction of the microstructure constituents, i.e. the equixed ${\alpha}$, equixed ${\beta}$ and lamellar ${\alpha}$. The results showed that the O-partitioned equixed ${\alpha}$ had a much higher strength compared to the equixed ${\beta}$. The strength of the lamellar ${\alpha}$ increased with increasing the annealing temperature because the O content of the lamellar ${\alpha}$ increased. Ti-1.5Al-3Fe-0.25Si-0.3O alloy annealed to $900^{\circ}C$ where the volume fraction of lamellar ${\alpha}$ was the highest exhibited an excellent combination of the strength (1198.5 MPa) and ductility (27.5%). The effect of the lamellar ${\alpha}$ on the ductility was discussed.