• 융합신호처리학회논문지
• /
• 제8권3호
• /
• pp.143-148
• /
• 2007

영상처리에 있어서 갑작스러운 신호와 불확실한 시스템의 특징을 정확하게 표현하기 위하여 많은 연구가 수행되어 왔다. 많이 알려진 퓨리어 변환은 임의 신호의 주파수 해석에 폭넓게 사용되어 왔다. 그러나 이 방법은 시간 축에서 발생하는 갑작스러운 신호 변환과 비정상적인 신호를 주파수 변환 영역에서 나타낼 수 없으므로 유용하지 않다. 본 논문은 이산 웨이브렛을 이용한 영상해석을 하였다. 이는 웨이브렛 영역에서의 극대치는 Lipschitz 지수 표현이 가능하고, 또한 극대치만 사용하여 영상 데이터의 윤곽선 및 데이터 특성을 표현하는 유용함을 나타내었다. 더욱이 적은 극대치만을 사용하여 본래 영상을 재생하는 것도 가능하게 되었다. fractal 해석은 예로서 적용되었다. 그리고, 모형 배에서 기름 띠의 가시화 영상이 해석되었다. 극대치 해석으로 fractal 변수를 구하고, 가시화 영상 해석의 실험으로 양호한 결과를 얻었다.

• Structural Engineering and Mechanics
• /
• 제25권5호
• /
• pp.565-576
• /
• 2007

The article describes a technique for the measurement of the level of complexity of fracture surfaces by the method of vertical sections, and a performed statistical analysis of the effect of profile lines on the fractographic and fractal parameters of fractures, i.e. the profile line development factor, $R_L$, and the fracture surface development factor, $R_S$, (as defined by the cycloid method), as well as the fractal dimension, $D_C$, (as determined by the chord method), and the fractal dimension, $D_{BC}$, (as determined by the box method). The above-mentioned parameters were determined for fracture surfaces of basalt and gravel concretes, respectively, which had previously been subjected to fracture toughness tests. The concretes were made from mixtures of a water/cement ratio ranging from 0.41 to 0.61 and with a variable fraction of coarse aggregate to fine aggregate, $C_{agg.}/F_{agg.}$, in the range from 1.5 to 3.5. Basalt and gravel aggregate of a fraction to maximum 16 mm were used to the tests. Based on the performed analysis it has been established that the necessary number of concrete fracture profile lines, which assures the reliability of obtained testing results, should amount to 12.

• 한국농공학회논문집
• /
• 제47권7호
• /
• pp.37-45
• /
• 2005

In this study, R/S analysis which was proposed by Mandelbrot & Wallis (1969) was applied to evaluate the presence of the fractal property in the cone tip resistance of in-situ CPT data. Hurst exponents (H) were evaluated in the range of 0.660$\sim$0.990 and the average was 0.875. It was confirmed that a cone tip resistance data had the characteristic of fractals and it was expected that cone tip resistance data sets are well approximated by a fBm process with an Hurst exponent near 0.875. It was also observed that the boundary between layers were obviously identified as a result of R/S analysis and it will be usage in practices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2060-2062
• /
• 1999

When the high voltage is applied on insulation materials that have voids and impurities inner one, then probability of electrical tree inception is increased at defects. Electrical tree gives a profit to degradation analysis, because it is possible to observe by eyes and provides electrical degradation step. And electrical tree is divided to three types in usual - tree type, bush type and chestnut type tree. But these three types are divided not by method of quantitative analysis but visual and experiential analysis. In this paper, three types of electrical tree were calculated by quantitative analysis using fractal mathematics and classified to fractal dimensions (FD). FD of tree types are 1.1$\sim$1.4, bush types are 1.4$\sim$1.6 and chestnut type trees have above 1.6 FD.

• 대한전자공학회논문지TC
• /
• 제39권12호
• /
• pp.566-574
• /
• 2002

본 논문에서는 몬테칼로 모멘트 해석법을 이용하여 프랙탈 형상을 가진 완전 도체 표면에서 산란된 장을 구하였다. 프랙탈 형상을 가진 1차원 표면은 프랙셔녈 브라운 모션 모델을 사용하여 생성하였다. 프랙탈 표면의 형상을 결정하는 스펙트럼 변수(S/sub 0/), 프랙탈 차원(D)에 대한 역방향 산란계수를 계산하였다. 계산에 사용된 표면의 수는 80개, 표면의 점의 수는 2048개이고, 표면의 길이는 64파장이었다. 계산된 결과의 타당성을 검증하기 위해 소 섭동 근사기법을 이용하여 계산된 결과와 비교하였다. 그 결과 양자간의 결과는 서로 잘 일치함을 알 수 있었다.

• 산업경영시스템학회지
• /
• 제23권57호
• /
• pp.51-62
• /
• 2000

In this study, the psycho-physiological response of drivers was investigated in terms of EEG(Electroencephalogram), especially with the fractal dimensions computed by Chaotic algorithm. The Chaotic algorithm Is well Known to sensitively analyze the non-linear information such as brain waves. An automobile with a fully equipped data acquisition system was used to collect the data. Ten healthy subjects participated in the experiment. EEG data were collected while subjects were driving the car between Won-ju and Shin-gal J.C. on Young-Dong highway The results were presented in terms of 3-Dimensional attractor to confirm the chaotic nature of the EEG data. The correlation dimension and fractal dimension were calculated to evaluate the complexity of the brain activity as the driving duration changes. In particular, the fractal dimension indicated a difference between the driving condition and non-driving condition while other spectral variables showed inconsistent results. Based upon the fractal dimension, drivers processed the most information at the beginning of the highway driving and the amount of brain activity gradually decreased and stabilized. No particular decrease of brain activity was observed even after 100 km driving. Considering the sensitivity and consistency of the analysis by Chaotic algorithm, the fractal dimension can be a useful parameter to evaluate the psycho-physiological responses of human brain at various driving conditions.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.915-923
• /
• 2002

Recently, GIS(Geographic Information System) is used to extract various hydrological factors from DEM(Digital Elevation Model) in river basin. Therefore, this study aims at the determination of river fractal dimension using DEM. In this paper, the main-stream length in river basin was grid-analyzed for each scale(1/5,000, 1/25,000, 1/50,000) and each cell size(5m$\times$5m, l0m$\times$l0m, 20m$\times$20m, 30m$\times$30m, 40m$\times$40m, 50m$\times$50m, 60m$\times$60m, 70m$\times$70m, 80m$\times$80m, 90m$\times$90m, 100m$\times$l00m, 120m$\times$120m, 150m$\times$150m) using GIS. Also, fractal dimension was derived by analyzing correlation among main-stream lengths, scale, and cell size which were calculated here. The result of calculating fractal dimension for each cell size shows that the fractal dimension on the main-stream length is 1.028.

• 한국가시화정보학회지
• /
• 제22권1호
• /
• pp.79-84
• /
• 2024

As microchips' degree of integration is getting higher, its cooling problem becomes important more than ever. One of the promising methods is using fractal microchannel heat sink by mimicking nature's Murray networks. However, most of the related works have been progressed only by numerical analysis. Perhaps such lack of direct experimental studies is due to the technical difficulty of the temperature and heat flux measurement in complex geometric channels. Here, we demonstrate the direct visualization of in situ temperature profile in a fractal microchannel heat sink. By using the temperature-sensitive fluorescent dye and a transparent Polydimethylsiloxane window, we can map temperature profiles in silicon-based fractal heat sinks with various fractal scale factors (a=1.5-3.5). Then, heat transfer rates and pressure drops under a fixed flow rate were estimated to optimize hydrodynamic and thermal characteristics. Through this experiment, we found out that the optimal factor is a=1.75, given that the differences in heat transfer among the devices are marginal when compared to the variances in pumping power. This work is expected to contribute to the development of high-performance, high-efficiency thermal management systems required in various industrial fields.

• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.175-182
• /
• 1999

Scanning electron microscopy (SEM) has played an important role in receptor modeling area because it is a powerful tool for characterizing individual particles. The purpose of the study was to classify individual diesel particles base on statistical analysis and image analysis by SEM/EDX (energy dispersive x-ray analyser). The diesel particles were sampled by both a modified CVS 75 mode and a high speed mode with a chassis dynamometer. The SEM/EDX system provides various physical parameters including particle's particle diameter and chemical information. Thus density and mass of the diesel particle were estimated cased on its chemical composition and further fractal dimensions of the diesel particle were obtained by the Hurst exponent method. The fractal dimension in the sample of modified CVS 75 mode was higher than the high speed mode. Finally, mass fractions for a diesel vehicle as a source profile were estimated cased on a particle class concept.

• Imaging Science in Dentistry
• /
• 제37권4호
• /
• pp.211-215
• /
• 2007

Purpose: The purpose of this study was to evaluate the effect of the kV on fractal dimension of trabecular bone in digital radiographs. Materials and Methods: 16 bone cores were obtained from patients who had taken partial resection of tibia due to accidents. Each bone core along with an aluminum step wedge was radiographed with an occlusal film at 0.08 sec and with the constant film-focus distance (32 cm). All radiographs were acquired at 60, 75, and 90 kV. A rectangular ROI was drawn at medial part, distal part, and the bone defect area of each bone core image according to each kV. The directional fractal dimension was measured using Fourier Transform spectrum, and the anisotropy was obtained using directional fractal dimension. The values were compared by the repeated measures ANOVA. Results : The fractal dimensions increased along with kV increase (p < 0.05). The anisotropy measurements did not show statistically significant difference according to kV change. The fractal dimensions of the bone defect areas of the bone cores have low values contrast to the non-defect areas of the bone cores. The anisotropy measurements of the bone defect areas were lower than those of the non-defect areas of the bone cores, but not statistically significant. Conclusion: Fractal analysis can notice a difference of a change of voltage of x-ray tube and bone defect or not. And anisotropy of a trabecular bone is coherent even with change of the voltage of x-ray tube or defecting off a part of bone.