• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1030-1034
• /
• 1993

A converter topology which is capable of four-quadrant(motoring and generation) operation is proposed for the variable speed constant frequency(hereafter referred as VSCF) power conversion scheme. The new converter topology for the VSCF power conversion scheme is made of two functional stages. One is converting stage which consists of six switches and six diodes and it interfaces a three-phase 60Hz at supply and a single-phase variable-frequency ac source. The other is the commutating stage though which each phase-winding is energized.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.43-49
• /
• 2000

In this paper, the CMOS four-quadrant analog multipliers for low-voltage low-power applications ate presented. The circuit approach is based on the characteristic of the LV(Low-Voltage) composite transistor which is one of the useful analog building blocks. SPICE simulations are carried out to examine the performances of the designed multipliers. Simulation results are obtained by 0.6${\mu}{\textrm}{m}$ CMOS parameters with 2V power supply. The LV composite transistor can easily be extended to perform a four-quadrant multiplication. The multiplier has a linear input range up to $\pm$0.5V with a linearity error of less than 1%. The measured -3㏈ bandwidth is 290MHz and the power dissipation is 373㎼. The proposed multiplier is expected to be suitable for analog signal processing applications such as portable communication equipment, radio receivers, and hand-held movie cameras.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.26-33
• /
• 2002

In this paper, a new four-quadrant MOS analog multiplier Is proposed using the quarter-square technique, which is based on the quadratic characteristics of MOS transistor operating in the saturation region and the difference operation of a source-coupled differential circuits. The proposed circuit has been fabricated in a p-well CMOS process. The multiplier achieves a total harmonic distortion of less than 1 percent for the both input ranges of 50 percent of power supply, a -3㏈ bandwidth of 30㎒ a dynamic range of 81㏈ and a power consumption of 40㎽. The active chip area is 0.54㎟. The supposed multiplier circuit is simple and adjust high frequency application because one input signal transfer output by one transistor.

• Acta Via Serica
• /
• v.7 no.2
• /
• pp.153-178
• /
• 2022

This study analyzes the traces of East-West cultural exchange focusing on the palmette pattern expressed on Sassanid Persian and Silla Korean carpets. The results of the study are as follows. The palmette, which originated in ancient Egypt, is an imaginary flower made up of the transformation of a lotus, which combined with the Mesopotamian quadrant (四分法) and expanded to a four-leaf palmette and further to an eight-leaf palmette by applying the octant (八分法). The palmette, which was brought to Assyria, Achaemenid Persia, Parthia, Greece, and Rome, can be seen lavishly decorated with plant motifs characteristic of the region. Sassanid Persia inherited the tradition of the palmette pattern, which applied the quadrant and octant seen in several previous dynasties. On the one hand, it has evolved more splendidly by combining the twenty or twenty-one-leaf palmette and the traditional pearl-rounded pattern decoration of Sassanid Persia. These Sassanid Persian palmette patterns can be found through the palmette patterns depicted on the ceilings of the Dunhuang Grottoes located on the Silk Road. The palmette pattern of the Dunhuang Grottoes was expressed in the form of a fusion of Persian Zoroastrianism, Indian Buddhism, and indigenous religions. In the Tang Dynasty, it shows the typical palmette pattern of four and eight leaves in the medallion composition, which were mainly seen in Persian palmettes. The palmette pattern handed down to Silla can be found on a Silla carpet, estimated to be from around the 8th century, in the collection of Shoso-in (正倉院), Japan. The Silla carpet shows a unique Silla style using motifs such as peonies and young monks, which were popular in Silla while following the overall design of the Persian medallion.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.12
• /
• pp.1160-1165
• /
• 2018

Purpose: To evaluate the availability of ultra-wide field fundus photography based on eye steering technique to diagnose retinal breaks in patients with symptomatic posterior vitreous detachment (PVD). Methods: The medical records of patients with symptomatic PVD were reviewed. Retinal breaks were independently identified using four eye steering capture images of ultra-wide field fundus photographs. The sensitivity and specificity of eye steering capture imaging for diagnosing retinal breaks were calculated. Results: A total of 94 eyes of 94 patients were included. Using fundus examination after pupil dilatation, retinal breaks were diagnosed in 42 (45%) eyes. The sensitivity of the eye steering capture imaging was 98% (95% confidence interval [CI]: 88-100%), and the specificity was 98% (95% CI: 90-100%). Of the 58 retinal tears, 28 (97%) involving the superior quadrant, 10 (100%) involving the inferior quadrant, 6 (100%) involving the nasal quadrant, and 13 (100%) involving the temporal quadrant were identified using eye steering capture images. Conclusions: Ultra-wide field fundus photography based on eye steering technique was useful for diagnosing retinal breaks in patients with symptomatic PVD. However, eye steering photography could not adequately replace the fundus examination after pupil dilatation in all cases.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.130-132
• /
• 1997

In this paper, we propose a new type of tubular linear induction motor(TLIM) with two-dimensional motion. The proposed motor consists of four short primary LIMs arranged on a same circumference and a common secondary. By adopting independently energized ring-windings to the primary, we can expect the reduction of coil-end region and the freedom of alternating current supply. The secondary conductor is capable of producing anyone of rotary, linear, and helical motions by controlling the phase of supply currents in each primary winding. From the 3-D finite element analysis and the experiment, we derive the feeding conditions to increase the subsidiary rotary-force and an optimal arrangement of primary currents to reduce the number of slot.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.1
• /
• pp.31-41
• /
• 2018

The purpose of this study is to look at the difference between the importance and the satisfaction with respect to government startup aid programs perceived by entrepreneurs to improve the effectiveness of government startup aid policy and verify the causal relationship between startup aid project and business performance. In this respect, this study aims to look at the impact of entrepreneurs' perceived satisfaction over government startup aid programs on startup business performance. Major study findings from this study are as follows. First, as a result of testing statistical significance of the difference between importance and satisfaction in startup education, facility/space, consulting, or fund support field, respectively in start-up assistance project, it appeared that there was a significant difference in all fields. In addition, fund support was the field that showed the biggest difference between importance and satisfaction. Second, the results of IPA (importance-performance analysis), which displays relative importance and performance of start-up assistance project on four quadrants so that entrepreneurs can evaluate which start-up assistance projects they think important and which projects they are satisfied with by themselves are as follows. Let us summarize the distribution of start-up assistance project on four quadrants in the first place. Facility/space support project is distributed in the 1st quadrant that requires ongoing maintenance; start-up funding program in the 2nd quadrant that requires concentrated improvement; consulting support project in the 3rd quadrant that requires limited use at low priority; and start-up education support project in the boundary between the 3rd quadrant that requires limited use and the 4th quadrant that requires rejection against unnecessary items. Third, the results from multiple regression analysis to identify the impact of satisfaction with government startup aid programs over business performance are as follows. As a result of analyzing the influence relationship between government startup aid program and financial performance, it appeared that satisfaction with facility/space had a positive (+) impact on financial performance. This suggests that the higher the satisfaction with facility/space, the higher the financial performance. As a result of analyzing the influence relationship between start-up assistance project and non-financial performance, it appeared that satisfaction with startup education had a positive (+) impact on non-financial performance. This suggests that the higher the satisfaction with startup education, the higher the non-financial performance.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.311-322
• /
• 2012

Restoration materials used to investigate effects of fluorine such as enamel strengthening and anti-caries effects in several types of dental restoration materials were five kinds including Ionoseal(VOCO GmbH, Cuxhaven, Germany), Fuji Filling LC(GC Co. Tokyo, Japan), Quadrant Universal LC(CAVEX Holland BV, Netherlands), PermaCem$^{(R)}$(DMG, Hamburg, Germany) and Dyract$^{(R)}$ AP(Dentsply GmbH, Germany), and the amount of fluorine-releasing was measured with ICS-5000 Reagent-FreeTM Ion Chromatography(RFICTM, Dionex, U.S.A.). The results of this study are as follows. 1. In all types of restoration materials, the amount of fluoride-releasing was reduced with time passage and it was declined sharply to show significance in four weeks. Fuji Filling LC(12.445PPM) or resin-reinforced glass ionomer and PermaCem$^{(R)}$(16.121PPM) or compomer were found to release fluorine for a long term(P<.001). 2. Ionoseal(0.887PPM) or glass ionomer and Quadrant Universal LC(0.957PPM) or composite resin released a few fluorine of 1PPM or less than 1PPM after one week, and Dyract$^{(R)}$ AP or compomer released fluorine of 8.631PPM in one week and its amount of releasing decreased dramatically in two and four week by recording 0.175PPM and 0.116PPM, respectively. Therefore, the effect of releasing fluorine in four weeks was observed to be poor (P<.001). 3. Fuji Filling LC or resin-reinforced glass ionomer and PermaCem$^{(R)}$ or compomer released fluorine of 33.372 and 1.902PPM, respectively in one week and their amount of releasing increased to be 36.371 and 18.223PPM, respectively in two weeks. So, their amount of fluorine-releasing recorded the highest levels in two weeks(P<.001).

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.367-373
• /
• 2013

Background Breast-conserving surgery is widely accepted as an appropriate method in breast cancer, and the lateral thoracodorsal flap provides a simple, reliable technique, especially when a mass is located in the lateral breast. This study describes the usefulness of a lateral thoracodorsal flap after breast conserving surgery in laterally located breast cancer. Methods From September 2008 to February 2013, a lateral thoracodorsal flap was used in 20 patients with laterally located breast cancer treated at our institution. The technique involves a local medially based, wedge shaped, fasciocutaneous transposition flap from the lateral region of the thoracic area. Overall satisfaction and aesthetic satisfaction surveys were conducted with the patients during a 6-month postoperative follow-up period. Aesthetic results in terms of breast shape and symmetry were evaluated by plastic surgeons. Results The average specimen weight was 76.8 g. The locations of the masses were the upper lateral quadrant (n=15), the lower lateral quadrant (n=2), and the central lateral area (n=3). Complications developed in four of the cases, partial flap necrosis in one, wound dehiscence in one, and fat necrosis in two. The majority of the patients were satisfied with their cosmetic outcomes. Conclusions Partial breast reconstruction using a lateral thoracodorsal flap is well matched with breast color and texture, and the surgery is less aggressive than other techniques with few complications. Therefore, the lateral thoracodorsal flap can be a useful, reliable technique in correcting breast deformity after breast conserving surgery, especially in laterally located breast cancer.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.164-172
• /
• 2008

This paper investigates passengers' perceptions of the importance and satisfaction of airline service quality for improving the quality level of airline service. Importance-performance analysis(IPA) was utilized to analyze the gap between importance and performance of airline service qualify The result showed that passengers' perceptions of the importance and performance of airline service quality differed for Korean international air passengers. In particular, IPA analysis revealed that four attributes 'meal service', 'seating comfort', 'seat space and legroom', 'check-in service' were identified in the Concentrate Here quadrant-perceived to be important, yet perceived as being performed poorly. The airlines operating from/to the Republic of Korea should concentrate on the attributes included in this quadrant to improve the quality of airline service. On the basis of the IPA analysis, airlines should identify their strengths and weaknesses and draw up a plan to maximize their profits.