• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.500-504
• /
• 1997

Current source inverter drives of auto sequentially commutated type are very popular in high power applications, because of simple power circuit configuration with four quadrant operation. But the six-step current output create harmonic problems and the input power factor of such a drive is not always good. In this respect pulse width modulated drives using gate turn off thyristors ( GTO ) are finding application, especially in traction drives. However the switching and snubber loses of a GTO do not permit the inverter switching frequency go beyond a few hundred hertz.This will again introduce low frequency harmonic problems. Multi level inverters of the 3-level and 5-level can be considered as an alternative to overcome the low switching frequency harmonic problem of the 2-level GTO inverters. But with multi level inverters the complexity of the power circuit increases. In this paper a combination of multi level ( 2-level and 3-level ) inverters and multi phase induction motor ( 3-phase and 6-phase) configurations are presented for high power VSI drives for traction applications with reduced inverter switching frequency requirements coupled with reduced voltage rating for the power switch.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.268-270
• /
• 1995

In crane drives, DC motor has been most widely used due to simple control characteristic and favorable transient behavior. Nowadays, however, the squirrel cage induction motor is known as an attractive candidate due to elimination of all sliding electrical contacts, resulting in an exceedingly simple and rugged construction. Especially, in hoist application, the smooth torque control and four quadrant operation are essential. In this paper, an operation of dual inverters with common DC bus fed by vector controlled induction motor is described. Single DSP is employed as a main processor to control dual inverters and communicates each input/output signal with PLC. As well as giving a detailed expression, full simulation and experimental results are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.340-348
• /
• 1986

The design of two-dimensional zero-phase FIR digital filters by transformations is a popular and well-developed technique, but is suffers from the disadvantage that in its current form the filters with only four quadrant symmetry can not be designed exactly circular symmetry at frequencies far from the origin. it is shown how symmetry requirement for the filters with any number of dimensions can be fulfilled with arbbitrary percision by adapting transformation with the appropriate series expansions. this transformation has been known generally as the McClellan transformation. In this paper, a simple method for ensuring exelent circular symmetry at frequencies far from the origin is presented. This method which employs the Modified Mcclellan trnsformation for the design of 2-D FIR filter form 1-D FIR filters is quite useful for the design of 2-D FIR filters with multiple cutoff boundaries such as band-pass filters.

• Atmosphere
• /
• v.25 no.4
• /
• pp.591-600
• /
• 2015

We have analyzed wind and eddy covariance data collected within roughness sublayer over sloping terrain. The study site is located on non-flat terrain with slopes in both south-north and east-west directions. The surface elevation change is smaller than the height of roughness element such as building and tree. This study examines the directional wind shear for data collected at three levels in the lowest 10 m in the roughness sublayer. The wind direction shear is caused by drag of roughness element and terrain-induced motions at this site. Small directional shear occurs when wind speed at 10 m is strong and wind direction at 10 m is southerly which is the same direction as upslope flow near surface at this site during daytime. Correlation between vertical shear of lateral momentum and lateral momentum flux is smaller over steeply sloped surface compared to mildly sloped surface and lateral momentum flux is not down-gradient over steeply sloped surface. Quadrant analysis shows that the relative contribution of four quadrants to momentum flux depends on both surface slope and wind direction shear.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.103-105
• /
• 2015

The 22 m diameter Mopra telescope in Australia is being used to undertake an improved survey of the CO J = 1-0 line at 3mm along the 4th quadrant of the Galaxy, achieving an order of magnitude better spatial and spectral resolution (i.e. 0.6 and 0.1 km/s) than the Dame et al. (2001) survey that is publically available for the Southern Galactic plane. Furthermore, the Mopra CO survey includes the four principal isotopologues of the CO molecule (i.e. $^{12}CO$, $^{13}CO$, $C^{18}O$ and $C^{17}O$). The survey makes use of an 8 GHz-wide spectrometer and a fast mode of on-the-fly mapping developed for the Mopra telescope, where the cycle time has been reduced to just 1/4 of a second. 38 square degrees of the Galaxy, from $l=306-344^{\circ}$, $b=0{\pm}5^{\circ}$ have currently been surveyed, together with additional 9 sq. deg. regions around the Carina complex and the Central Molecular Zone. We present new results from the survey (see also Burton et al., 2013, 2014). The Mopra CO data are being made publically available as they are published; for the latest release see the project website at www.phys.unsw.edu.au/mopraco.

• The Journal of the Korean dental association
• /
• v.9 no.12
• /
• pp.791-795
• /
• 1971

Thirty-four children who were patients at the Pedodontic Department of Infirmary of Dental College, S.N.U., aged from 3 years 1 month to 6 years 10 months. One quadrant jaw was measured for each child, Each of the 5 teeth was measured in 6 specific areas, therefore, a total of 1,020 measurements were observed. The results were as follows: 1. Facial surface was the shallowest of all. It was 0.14 mm. shallower than lingual, 0.62mm. shallower than mesial, 0.98mm. shallower than distal. 2. The sulcus generally increased in depth from anterior to posterior. 3. The anterior segment in the maxilla was the shallowest of all. It was 0.68mm. shallower than posterior of maxilla, 0.08 mm. shallower than anterior of mandible, 0.63 mm. shallower than posterior of mandible. 4. The most frequent measurement observed in the both jws was 1.4mm. 5. The mean for the complete anterior segment in the maxilla was 1.3±0.50 mm. In the posterior segment of the maxilla, the mean was 2.0v0.74mm. In the mandible, the mean for the anterior segment was 1.4±0.46 mm. In the posterior segment of the mandible, the mean was 2.0±0.56 mm. 6. The mean gingival sulcus depth for the entire Primary Dentition was 1.7±0.59 mm.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.12
• /
• pp.592-600
• /
• 2005

In this paper, a low loss magnetic levitation(Maglev) system is suggested and tested. The suggested Maglev system includes four hybrid magnets which consist of permanent magnet and coil. In the steady state, the levitated module system can be supported by attraction force generated by permanent magnet. The coil current controls only dynamic loads due to external disturbances. The module systems are designed by using finite element method(FEM) software tools such as MAXWELL and ANSYS. Also, digital control systems are designed to keep the magnet airgap at a constant value. The control systems include a VME(versa module europa)-based CPU(central processing unit) board, AD(analog to digital) board, PWM(pulse width modulation) board, 4-quadrant chopper, and sensors. In order to estimate the vertical velocity of the magnet, we use second order state observer with acceleration and gap signals as input and output signals, respectively. The characteristics of the suggested low loss Maglev system are demonstrated by experimental results showing coil current of 0A in the steady state of 3m airgap and performance specifications are satisfied for reference gap and force disturbance.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.225-226
• /
• 2015

이 논문에서는 ITER 초전도 코일 전원 장치 중 진공 용기내에 형성된 자장의 오차를 보정해주는 CCU/L 컨버터의 4 상한 운전을 위한 제어 알고리즘을 설명하고, 제어 알고리즘을 실제 컨버터에 적용하여 구현하였다. ITER CCU/L 컨버터는 4 상한 제어를 통해 영 전류 불연속 구간 없이 Correction Coil에 전압(${\pm}85V$), 전류(${\pm}10kA$)를 공급해야 하고, 이를 위해선 4 상한 운전을 위한 제어가 매우 중요하다. 4 상한 운전은 다섯 가지 모드에서 동작된다. 본 논문에서, 각 모드에 대해 설명하고, 컨버터가 각 모드에서 정상적으로 제어되는지 시뮬레이션 및 실제 시험을 통해 검증하였다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.22 no.6
• /
• pp.619-623
• /
• 2019

We report the case of a seven-year-old boy with an ingested foreign body, which was retained within the appendix for a known duration of ten months, ultimately requiring appendectomy. The ingested foreign body was incidentally discovered by abdominal x-ray at an emergency room visit for constipation. Despite four bowel cleanouts, subsequent x-rays showed persistence of the foreign body in the right lower quadrant. While the patient did not have signs or symptoms of acute appendicitis, laparoscopic appendectomy was performed due to the risk of this foreign body causing appendicitis in the future. A small metallic object was found within the appendix upon removal. This case highlights the unique challenge presented by foreign body ingestions in non-verbal or developmentally challenged children and the importance of further diagnostic workup when concerns arise for potential retained foreign bodies.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.28-38
• /
• 2022

Virtual idols have aroused wide attention as a novel product of the idol industry in the digital era over the past few years. The population of China determines that virtual idols have a huge fan market. As a digital cultural product closely connected with fans, virtual idols are im-portant to gain insights into the correlation between fan satisfaction and virtual idol functions. In accordance with the KANO demand model, this study first classifies and explains the specific functions of virtual idols into four quadrants, including attractive, must-be, 1D (One-Dimensional), and indifferent. Subsequently, the satisfaction of fans of virtual idols with specific functions in each quadrant are analyzed using a questionnaire. This study suggests that virtual idols have one at-tractive quality, three 1D quality, two must-be quality, and five indifferent quality functional elements. This study qualitatively analyzes the functional elements of virtual idols through fan satisfaction based on the KANO model, which provides valuable help for future research in the field of virtual idols and producers in this field.