• 한국농공학회지
• /
• 제14권1호
• /
• pp.2503-2519
• /
• 1972

The studies were carried out to find the cause and the quantitative evaluation of sea dike materials loss which is occured during the period of construction works for the tideland reclamation projects on the west coast of Korea. Major subjects to studies were to establish the typical relationships between the tidal flow and the movement of dike materials, the tidal-flow and the erosion, the dike materials and the ratio of material movement(losses), construction methods and the ratio of materials movement (losses). Based on the above subjects, the studies were made for the purpose of obtain the following informations; (1) Collecting and evaluaing the data of dike material losses due to foundation settlement, from designed existing dikes on the west coast. (2) By the field investigation at A-San Sea Dike, Pyong Taek Project, the Comparison would be made by the relationships between the tide velocity and the movement of dike foundation under the natural conditions and the period of construction so that find out the relationship between the dike materials of foundation situation and settlements. With regard to the dike construction works, it is so difficult to calculate the exact quantity of material losses due to the foundation settlements. The major factors that affect the settlement losses of the dike materials are: (1) Topographical variation (2) Swepting the sectional area of dike by the tide velocity. (3) Dumping riprap to the outerside of dike during the period of construction works. (4) Sectional area losses by the cause of occurence of the new tide channels. (5) material losses by the heavy storms. (6) Consolidation settlement by the foundation weakness. (7) Material losses by the earth materials by tide flow. Most hi호 material losses were occured by the Consolidation settlement due to the foundation weakness, the maximum tide velocities due to decrease the cross sectional area of the gaps and erosion of foundation due to the range of tide, Inner and outerside of dike, or dike material loses due to the tide flow. Final conclusion would be obtained by the continuous measurement of consolidation settlement at the stage of final clusure of the dike. (It is scheduled to close on the end of 1972) However, intermediate conclusion can be introduced as follows: (1) The estimation of material(losses) during the period of construction works for the existing sea-dikes up to date were only empirical. The material losses at the general closure for design was estimated at 10% of the riprap, 20% of the earth materials, and 20% of the riprap, 40% of the earth materials at the final closure of the dike. The final closure estimated double quantity to the general closure, but it is still doubt. (2) The ratio of consolidation settlements was found smaller than the calculated quantity. It can be foreseen that settlement speeds is higher thom the calculated speeds. (3) The movement of dike foundation under the natural conditions were not so depends on the geological conditions of the foundation. (4) When the tide velocities was estimated 100 at the normal tide, it was estimated 125 at the high tide and 55 at the low tide. The tide velocities at the low tide shows apparently lower than the high tide and the higher velocities at the deep water depth.

• Advances in materials Research
• /
• 제5권1호
• /
• pp.35-53
• /
• 2016

Flexural bending analysis of perfect and imperfect functionally graded materials plates under hygro-thermo-mechanical loading are investigated in this present paper. Due to technical problems during FGM fabrication, porosities and micro-voids can be created inside FGM samples which may lead to the reduction in density and strength of materials. In this investigation, the FGM plates are assumed to have even and uneven distributions of porosities over the plate cross-section. The modified rule of mixture is used to approximate material properties of the FGM plates including the porosity volume fraction. In order the elastic coefficients, thermal coefficient and moisture expansion coefficient of the plate are assumed to be graded in the thickness direction. The elastic foundation is modeled as two-parameter Pasternak foundation. The equilibrium equations are given and a number of examples are solved to illustrate bending response of Metal-Ceramic plates subjected to hygro-thermo-mechanical effects and resting on elastic foundations. The influences played by many parameters are investigated.

• Journal of Information Technology Applications and Management
• /
• 제13권3호
• /
• pp.107-127
• /
• 2006

Understanding characteristics of Internet businesses from cross-cultural perspective could offer valuable insights on developing business strategy and policy. This work is concerned with revealing divergence and convergence of Internet business models in their financial performance, given organizational conditions and cultural context. For this, we studied the association between organizational attributes (core activity, origination, firm age, and industry) and their effects on a firm's financial performance (gross revenue and net income). Relevant data was gathered from representative Internet firms in Korea and U.S. Data analysis indicated that there exist both similarities and differences between Korea and U.S and year 2003 and 2006. While core activities and industry types of U.S. firms has not been changed much between the periods, Korean firms show much difference. In addition, while core activities and industry type were found to have strong relationship with financial performance, age and origination of a firm weak connections with financial performance. This study is expected to provide a foundation for developing more robust and systematic research model and performing further empirical research in this area.

• 한국지반공학회논문집
• /
• 제17권4호
• /
• pp.161-171
• /
• 2001

점성토의 압밀거동은 투수성뿐만 아니라 변형 특성에 따라 크게 영향을 받으며, 변형 특성은 재하 방법에 따른 변형조건과 흙의 특성, 특히 이방성에 따라 다르게 나타난다. 이 논문에서는 점성토의 이방적 변형 특성이 압밀거동에 미치는 영향을 분석하기 위하여 다양한 변형 조건에 대한 압밀방정식과 압밀계수를 직교 이방성 탄성이론을 이용하여 유도하였다. 다양한 변형 조건에서 등방과 이방적 변형 특성하의 압밀계수를 평가하였으며, 그 결과 탄성계수의 이방성이 압밀계수에 미치는 영향이 매우 크고, 특히 수평방향의 변위가 허용되고, 수직방향의 변위가 구속될수록 크게 나타났다. 따라서 점성토 지반에 대한 하중 재하시 압밀소요시간의 정확한 예측을 위해서는 발생 가능한 변형 조건과 이방적 변형 특성에 대한 적절한 고려가 매우 중요함을 알 수 있었다.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.76-82
• /
• 2000

An arc sensor system to compensate positional errors was developed on the foundation of sensor interface system to make use of the on-line shift function of industrial welding robot. Investigating the on-line shift function, we examine the quantitative relationship between the deviation from programmed path and the correction data transferred from personal computer to robot controller. The number of input parameters for weld seam tracking can be reduced by making the relationship between the deviation and the correction data during half weaving be the function of only cross time. With the results of weld seam tracking for the butt joint with V-groove and fillet joint of sheet metal, good performance was implemented. By developing the sensor interface system to compensate the positional errors, industrial welding robot can be expected to contribute to the promotion of welding automation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.124-143
• /
• 2010

Cofferdam is a temporary levee or dam structure built by using sheet pile or earth materials to prevent water infiltration during construction work of bridge, dam, harbour dock, or hydraulic structures in the river. In this regard, it is required to secure cutoff ability for dry work and workability for rapid installation and removal of the temporary dam or levee structures. In this paper, case studies for design and construction of cofferdam were performed, and water diversion method was briefed with some examples of cofferdam type as well. For the case study details of design and construction were reviewed based on cofferdams under construction related to 16 submerged weirs of "The 4-river restoration project" and dam type cofferdam respectively. From the review, it was known that the method for changing the water flow is selected based on the data from geological and geo-hydraulic site investigation in order to mitigate environmental effects by making sure if the design cross-sectional area of flow and maximum working days are sufficiently guaranteed. Finally, the primary findings and main conclusion derived are summarized that determination of applicable type of cofferdam should be checked by case study and meet design requirements such as water inflow control, constructability.

• 대한토목학회논문집
• /
• 제39권2호
• /
• pp.317-325
• /
• 2019

석션 케이슨은 설치 수심제한이 적고, 비교적 단순한 설치공정과 빠른 시공이 가능하기 때문에 해양 구조물용 앵커 및 기초형식으로 활용되고 있으며 그 적용이 점차 확대되고 있다. 석션 케이슨 기초의 설계는 지반의 지지력 및 안정성 검토가 중심이 되며, 관련 설계기준에서 해석 방법을 제시하고 있다. 반면, 케이슨의 구조적 안전성 분석은 방법이 정형화되지 않았으며 특히 케이슨에 작용하는 하중 모델링에 대한 명확한 산정 방법이 정립되지 않아 석션 케이슨 단면 설계에 어려움이 있다. 이러한 이유로 본 연구에서는 이론 및 수치적 침투해석을 통해 석션압에 의해 발생되는 케이슨 내외부의 간극수압 크기 및 분포를 분석하고, 이를 바탕으로 구조해석에 적용할 수 있는 합리적인 하중 평가 방법을 제시하였다. 추가적으로 관입깊이, 투수계수의 이방성, 석션압 변화가 내외벽에 작용하는 간극수압에 미치는 영향을 분석하였다.

• 한국지반공학회논문집
• /
• 제26권8호
• /
• pp.39-47
• /
• 2010

최근 국내 외에서 초장대 교량 및 초고층 건물의 시공이 증가하고 있으며, 지반공학적인 측면에서 상부 구조물로 부터 전달되는 큰 하중을 안전하게 지지할 수 있는 대단면 기초의 설계와 시공이 요구되고 있다. 이에 본 연구에서는 연암지반에 실제 시공된 상부 구조물에서 전달되는 수직하중을 받는 전면기초의 거동분석을 위하여 3차원 유한요소 해석을 실시하였다. 해석 시 기초와 지반사이의 접촉면 유 무에 따른 거동을 비교 분석하였으며, 동일한 단면의 기초의 거동을 기초와 지반사이의 상대변위가 연암보다 더 크게 발생할 것으로 예상되는 풍화암 지반조건에서도 분석하였다. 또한 전면기초의 두께를 변화시켜 강성기초와 연성기초의 거동특성을 파악하였다. 본 연구 결과, 접촉면의 거동을 고려하지 않은 해석의 경우 기초의 침하량, 단면에 발생하는 인장응력 및 휨모멘트가 크게 산정되는 것으로 판단되었으며, 그 결과 접촉면의 거동을 고려하지 않을 경우 과다설계에 대한 우려가 있는 것으로 평가하였다.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.17-26
• /
• 2015

The cross sections of hollow cylindrical tubes ovalise under a pure bending condition, and this reduces their flexural stiffness as their curvatures increase. It is important to accurately evaluate this phenomenon, known as the 'Brazier effect', to understand the bending behaviour of the systems considered. However, if the tubes are supported by an elastic medium or foundation, the ovalisation displacements of their cross sections may decrease. From this point of view, the purpose of this research is to analytically investigate the bending characteristics of single- and double-walled elastic tubes contacted by an elastic material by considering the Brazier effect. The Brazier moment, which is the maximum moment-carrying capacity of the ovalised cross section, can be calculated by introducing the strain energy per unit length of the tube in terms of the degree of ovalisation for the tube and the curvature. The total strain energy of the double-walled system is the sum of the strain energies of the outer and inner tubes and that of the compliant core. Results are comparatively presented to show the variation in the degree of ovalisation and the Brazier moment for single- and double-walled tubes.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.136-141
• /
• 2023

Polyacrylic rubber (ACM) is well known for its excellent heat resistance and chemical stability. Additionally, its performance can be readily manipulated by modifying its functional groups, rendering it highly attractive to various industries. However, extreme climate changes have necessitated an expansion of the operating temperature range and lifespan of ACM products. This requires the optimization of both the compounding process and functional-group design. Hence, we investigated the relationship between the cross-linking system and mechanical properties of an ACM with a carboxylic cure site. The crosslink density is determined by chemical kinetics according to the structure of additives, such as diamine crosslinkers and guanidine accelerators. This interaction enables the manipulation of the scotch time and mechanical properties of the compound. This fundamental study on the correlation analysis between cross-linking systems, physical properties, and storage stability can provide a foundation for material research aimed at satisfying the increasingly demanding service conditions of rubber products.