• 조명전기설비학회논문지
• /
• 제14권2호
• /
• pp.89-96
• /
• 2000

본 논문은 최근의 반도체 스위칭 소자(Power-MCSEFET)를 사용하여 상용화의 관점에서 회로구성이 간단하고 취급이 용이한 Frward형 펼스 전원장치에 관하여 기술하고 있다. Forward형 고주파 펄스 전원장치에 인가되는 펄스전압의 최대값은 브리지 청류회로띄 위상각 제어에 의해서 이루어지고 있으며, 펄스전압은 Power-MOSFET의 듀티비에 의해 펼스주기가 정해진다. 또한, 본 논운에셔는 Forward형 펄스 전원장치의 회로동작과 전원장치의 특성 및 전원장치의 방전특성을 스위칭 주파수와 위상각의 변화에 따라서 검토하였다. 첨가해, 펄스 전원장치를 제작하여 램프형 오전발생기를 부하로 하였을 때 이론해석과 특성해석의 정당성을 입증하였다. 본 장치는 향후 다양한 분야로의 펄스 전원 시스템에 응용.가능성을 보여주고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1117-1119
• /
• 2001

This paper describes the forward type pulse power supply using a Power-MOSFET in the view of commercialization. The principle of basic operating and the operating characteristics of the forward type pulse power supply are estimated by the switching frequency, coupling factor and duty ratio. It is shown that theoretical and experimental results are in good agreement by comparing simulation and experimental results when a lamp type ozonizer can be used as a load. Also, experimental results indicate that the discharge and ozone concentration characteristics of the manufactured pulse power supply is more improved compare to the conventional pulse power supply[5]. This proposed supply show that it can be practically used as a pulse power supply in various environment improvement facilities.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.386-389
• /
• 2002

This paper proposes the boost input type active clamp forward ZVS(zero voltage switching) DC-DC converter which can provide high efficiency and improved EMI characteristics. Moreover, it has active clamp circuit for reducing the voltage stress and zero voltage switching technique for minimizing switching loss. The detailed operation principles and the simulation results are presented.

• 복식문화연구
• /
• 제9권5호
• /
• pp.770-782
• /
• 2001

The definite objects of this study are as follows; 1. The study presents the methods of the designing collar pattern and bodice pattern by each concrete object after comparing and analyzing the factors among the features which are in need of clothes designing. 2. The object of this study is to make body-suitable ready-made clothes by comparing and analyzing the methods of designing collar pattern and bodices pattern presented by each concrete objects and Bunka Pattern. The results of this study are as follows; 1 . The results of this study developed the body-suitable bodice pattern of bend-forward type, straight type and lean-back type Compared with the Bunka pattern by physical function test, this study was rated high in the aspects of the shape of neck and shoulder. 2. The collar pattern was designed according to each type. The front center rising point of straight type is 2.5cm, lean-back type is 3.0cm and bend-forward type is 1.5cm. Compared with the Bunka pattern by physical function test, this study is rated high in the aspects of the shape. To confirm the increase and change of the measure definitely, the complete examination of each subject is necessary. This developed and investigated pattern must be supplemented more by comparing and analyzing with other pattern and body types.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.1-4
• /
• 1998

In this paper, we proposed the alternated forward zero voltage switching multi-resonant Converter (AT Forward ZVS MRC). The AT forward ZVS MRC has similar characteristics with clamp mode forward ZVS MRC. So it can reduce the voltage stress to tow or three times a input density [W/inch2]. The proposed converter type is verified through the experimental converter with 48V input voltage, 5V/50W output voltage/power. The measured maximum voltage stress is 170V of 2.9 times the input voltage and the maximum efficiency of 81.66% is measured.

• 복식
• /
• 제54권2호
• /
• pp.149-165
• /
• 2004

In this study, the photographic and anthropometric measurements of men in the 20's were made. and pattern making professionals visually evaluated their side photos to classify lateral views. These data were analyzed by being compared with existing research results to select objective standards, and body types were classified according to the selected standard. In addition, body features were defined according to lateral views based on measurement items and indices, and standard lines and determining factors for visual evaluation which determines lateral views were revealed. Back length - front length size smaller than 1.5cm was named as the lean-back type, 1.5∼3.9cm was named as the straight type. and that larger than 3.9cm was named as the bend-forward type. In the straight type, the bisection point of waist depth was located at a similar place to tragion level vertical line. In the lean-back type, the point was at the front of tragion level vertical line. In the bend-forward type, the point was at the back of tragion level vertical line.

• The Journal of Korean Physical Therapy
• /
• 제14권1호
• /
• pp.117-124
• /
• 2002

Poor posture of the neck and head long been recognized as a factor contributing to the onset and perpetuation of pain in the head and neck region. The purposes of the study were to evaluate the changes in forward head posture and pressure pain threshold in tension type headache group and control group. Forward head posture were measured to craniovertebral angle and cranial rotation angle. Craniovertebral angle was smaller in tension type headache group(p<0.05), and cranial rotation angle was larger in tension type headache group(p<0.05). Pressure pain threshold was similar between tension type headache group and control group with the exception of right suboccipitalis and left temporalis(p<0.05).

• 충청수학회지
• /
• 제27권1호
• /
• pp.35-37
• /
• 2014

We examine a question raised in [1] regarding existence and uniqueness of the steady-state solution of certain type of Kolmogorov forward equation in this paper, and prove that the question holds for $S^1$ by giving an explicit solution.

• 호남수학학술지
• /
• 제35권4호
• /
• pp.679-681
• /
• 2013

In this paper, we raise a question regarding existence and uniqueness of the steady-state solution of a type of Kolmogorov forward equation. We prove that the question has a positive answer for trivial vector fields, and also provide examples which show that the compactness assumption is necessary.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.464-470
• /
• 2022

A new type of soft-switching forward converter is proposed in this study. By adding only a few components, the inductor, diode, switch, and capacitor exhibit higher efficiency than the conventional forward converter. Therefore, the switching losses of the proposed forward converter are considerably reduced compared with those of the conventional forward converter. In addition, the reset winding is not used because of the capacitor employed in the auxiliary circuit. The auxiliary capacitor is adopted for zero-current-transition operation and for dissipating magnetization energy. The performance of the proposed forward converter is validated using experimental results from a 60 W, single-output, forward converter prototype, and design guidelines are presented.