• Smart Structures and Systems
• /
• v.20 no.6
• /
• pp.759-767
• /
• 2017

Wear and aging associated damage is a severe problem for safety and maintenance of engineering structures. To acquire structural operational state and provide warning about different types of damage, research on damage identification has gained increasing popularity in recent years. Among various damage identification methods, the Lamb wave-based methods have shown promising suitability and potential for damage identification of plate-type structures. In this paper, a comprehensive study was presented to elaborate four remarkable aspects regarding the Lamb wave-based damage identification method for plate-type structures, including wave velocity, signal denoising, image reconstruction, and sensor layout. Conclusions and path forward were summarized and classified serving as a starting point for research and application in this area.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.20-36
• /
• 1993

Work-related low back pain is one of the major factors that cause the loss of working power especially in actively working age, therefore controlling the work-related low back pain is one of the major issues in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the efficient control program of the work-related low back pain. The subjects were male workers employed at the manufacturing industry in Pusan with longer than 6 months' working duration. The data was collected by self-reported questionnaire and interview from May 1 to October 31,1992. The contents of questionnaire were as follows:. the experience of low back pain within the recent one month, general characteristics(age, marital status, education level, religion, regular exercise), physical characteristics(height, weight), employment status(working duration, daily working hours, rest during work, satis(action fur the job), type of work and working environments(posture, forward bending, lifting and movement, satisfaction for table and chair). The result was analyzed for 608 entire respondents by case-control comparative method. The number of cases was 152 with a history of work-related low back pain, so the relative frequency of self-reported work-related low back pain was 25.0%, and the number of controls was 344 without any history of low back pain. As a result, two characteristics of the employment status(working duration, satisfaction fur the job) and all characteristics of type of work and working environments showed a statistical significance between the case and control groups(p<0.01). The Oddb ratios of these variables for Work-related low back pain were calculated. They were 7.88 for the satisfaction fur chair, 7.86 for lifting and movement,3.31 for satisfaction for table, and 2.22 fur bending forward(p<0.01). And for the multivariate logistic regression analysis confirmed that unsatisfaction for table was independent risk factor for Work-related low back pain. In summary, though this study was based upon the self-reported questionnaire and the subjective complaints, the satisfaction for chair, lifting and movement, satisfaction for table, and bending forward concerned with the type of work and working environments were considered as the main factors causing the work-related low back pain, and the work-related low back pain may be preventable by the ergonomic control of these factors.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.183-199
• /
• 1996

The objective of this study was to provide fundamental data on somatotype for elderly women by classifying the somatotype and analysing the 3 characteristics of their somatotype. The subject were 368 women of 60~84 years old, they were analyzed indirect photography. To find out differences among the age groups, the 368 subjects were grouped into two age groups (Group 1 ; age 60 to 69, Group 2 ; aged 70 to 84). Data were analyzed using Factor analysis, Cluster analysis, duncan test and Analysis of variance. Through the factor analysis, 27 items from photometric measurements respectively. Cluster analysis was applied for classification of somatotype. The results of this study were as follows. 1. The characteristics of Elderly women's somatotype were bending of the upper-torso, fatness of the waist and abdomen, drooping of the bust and shoulder and hip. In addition, height, girth, depth and width items were decreased in their sizes respectively. 2. The characteristics of clusters were as follows. Type 1 was straight somatotype in which the plumb line through tragion, the bust depth and under bust depth region laterally. Type 2 was swayback somatotype in which the upper portion of protruding point on the back was bent forward but the lower portion of protruding point had a characteristics of turning over somatotype. Type 3 was bending somatotype. Namely, this type was shorter than average and below the average fatness. Generally, the lateral view silhouette of elderly women was the straight type and changed into bending type as the age increases.

• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.13-21
• /
• 1995

This study was conducted to investigate the cutting mechanism of reciprocating knife of combine harvester. The cutting operation of reciprocating knife with the arrangement of the low-cutting and the double-cutting was demonstrated through cutting pattern diagram which was drawn by computer graphics. Various kinds and dimensions of reciprocating knives were analyzed using the developed program. The results are summarized as follows (1) The low-cutting type reciprocating knife was represented similar cutting characteristics to the standard type, but the maximum stalk-deflection was decreased as 1/2 level of the standard type. And the first ledger plate should be designed shorter than the second ledger plate. (2) The bunching area and the maximum stalk-deflection for the double cutting knife almost were not changed since cutting velocity ratio of 0.6, but the secondary cut were occurred at ratio of 0.8 and increased rapidly over these ratio. (3) The double cutting knife was recommended for the high speed combine, because its bunching area and the maximum stalk-deflection were decreased as 1/2 level of the standard type. (4) In order to maintain the proper cutting mechanism characterized by the bunching area, the maximum stalk-deflection and the secondary cutting length etc., the adequate cutting velocity at forward speed of 0.5㎧ to 1.2㎧ was from 0.3㎧ to 0.96㎧ for the double cutting knives.

• IMMUNE NETWORK
• /
• v.24 no.1
• /
• pp.6.1-6.17
• /
• 2024

The intricate role of innate type-2 cytokines in immune responses is increasingly acknowledged for its dual nature, encompassing both protective and pathogenic dimensions. Ranging from defense against parasitic infections to contributing to inflammatory diseases like asthma, fibrosis, and obesity, these cytokines intricately engage with various innate immune cells. This review meticulously explores the cellular origins of innate type-2 cytokines and their intricate interactions, shedding light on factors that amplify the innate type-2 response, including TSLP, IL-25, and IL-33. Recent advancements in therapeutic strategies, specifically the utilization of biologics targeting pivotal cytokines (IL-4, IL-5, and IL-13), are discussed, offering insights into both challenges and opportunities. Acknowledging the pivotal role of innate type-2 cytokines in orchestrating immune responses positions them as promising therapeutic targets. The evolving landscape of research and development in this field not only propels immunological knowledge forward but also holds the promise of more effective treatments in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.183-186
• /
• 1988

The problem addressed in this paper is the accurate tracting of a dynamic target using outputs from a forward - looking infrared(FLIR) sensor as measurements. The important variations are 1) the spread of the target intensity pattern in the FLIR image plane, 2) target motion characteristics, and 3) the rms value and both spartial and temporal correlation of the back - ground noise. Based on this insights. design modifications and on - line adaptation copabilities are incorporated to enable this type of filter track highly maneuverable targets such as air-to-air missiles, with spatially distributed and changing image intensity profiles, against, background clutter.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1751-1756
• /
• 2004

It will say as sense of this research that aid in new design system on our country South Korea type rapid that is developed continuously forward while increase step that do creation with rapid and environment that can not fall in the name of contemporary writings presenting universal color image self-acknowledgement being most nationality that is color image word that is intention enemy the future that image of rapid through such series process thinks.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.203-204
• /
• 2015

본 논문은 척추 건강관리기의 구동을 위한 가변형 전원 공급장치에 관한 논문이다. 본 시스템은 의료용 및 척추 마사지를 위한 장비로서 인체에 접촉하는 경우가 많고 높은 안전성을 요구하기 때문에 안정적인 전원 공급이 필요한 시스템이다. 본 시스템을 구동하기 위해서 100W의 전원이 필요하여 비교적 간단하고 절연타입의 Forward Type의 토폴로지를 적용하여 시스템에서 요구하는 전원을 공급하도록 회로를 설계 하였으며, 이를 시스템에 적용하여 성능을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.24-25
• /
• 2010

본 논문은 저전압 대전류의 신재생 에너지원을 고전압 저전류 계통에 연계하기 위하여 필요한 고압의 직류전압으로 변환하기 위하여 기존의 포워드 플라이백 컨버터의 출력단을 직렬로 연결한 새로운 방식의 컨버터를 제안한다. 제안된 컨버터는 절연의 장점을 가지고 있고 변압기 이용률이 높으며 효율이 우수한 장점을 가지고 있다. 제안된 회로의 동작원리를 설명하고 시뮬레이션으로 확인한 후 100[W]급 하드웨어 프로토 타입을 이용하여 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.25-29
• /
• 1986

The reaction of cysteine with cinnamaldehyde have been studied kinetically and thermodynamically. It was found that the reaction proceeds in two steps; formation of the monoadduct by a Michael type addition followed by the nucleophilic attack of the second cysteine to the carbonyl carbon of the monoadduct to afford the thiazolidine derivative. A reaction profile for the reaction of cysteine with cinnamaldehyde was constructed based on the thermodynamic parameters analyzed for the forward and the reverse reactions. It was assumed that the second step of this reaction accompanies an intermediate, a Schiff base.