• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.9-19
• /
• 2002

본 논문에서는 thermionic emission 모델을 이용하여 SCH 양자우물 레이저 다이오드에 대한 L-I-V특성을 해석적으로 도출하였다. SCH의 bulk 캐리어와 양자우물 속박 캐리어의 관계를 도출하였고, 주입된 전류를 각 영역에서의 캐리어 재결합을 고려한 전류 연속 방정식을 만족하도록 하였다. 또한, high level injection과 전하 중성 조건하에 ambipolar 확산 방정식을 이용하여 캐리어 분포를 고찰하였다. 위 해석적인 모델을 이용하여 계산한 결과, 클래딩 영역의 전위장벽 변화가 전류 전압 특성 변화의 주요 원인으로 나타났다. 또한 thermionic emission에 의한 주입 전류의 forward flux 증가가 캐리어 주입을 증가시키고, 레이저 다이오드의 직렬 저항을 감소시키는 것을 보였다.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.503-508
• /
• 2007

본 연구에서는 대변형 보이론을 이용하여 무베어링 로터 시스템의 공력탄성학적 안정성 해석을 수행하였다. 무베어링 로터 시스템의 유연보, 토오크 튜브, 그리고 메인 블레이드를 각각 탄성 운동을 하는 보로 가정하고, 1차원 보 요소로 모델링을 하였다. 외력으로는 2차원 준-정상 공기력 모델을 적용하였으며, 보의 유한 요소 지배방정식은 헤밀턴 원리(Hamilton's Principle)를 이용하여 얻었다. 공력탄성학적 안정성 해석을 수행하기 위하여 정지 비행시는 모달 접근법을, 전진 비행시는 주기적인 특성을 갖는 비선형 정적 트림해를 얻기 위해 동체 평형을 고려한 연계 평형 해석을 통한 완전 유한요소 방정식을 이용하였다. 본 연구에서 구한 결과를 기존의 적정변형 보이론에 모달 접근법을 이용한 무베어링 로터 시스템의 결과와 비교하였다.

• 대한화학회지
• /
• 제22권6호
• /
• pp.386-395
• /
• 1978

여러 농도와 온도에서 Poly(trans-5-methyl-L-proline)을 trifluoroethanol 용매에서 정방향 변광회전, trifluoroethanol-n-butanol (1 : 4) 용매에서 역방향 변광회전을 시키면서 변광회전속도를 측정하였다. 이 두 방향의 변광회전 현상은 폴리머농도에 대하여 1차 반응이었다. 활성화에너지를 측정하기 위하여 변형된 Arrhenius식을 유도하였는데 이식은 물리적 성질과 농도와의 관계나 반응차수가 불확실한 반응에 이용할 수 있다. 정방향과 역방향 변광회전의 활성화에너지는 잔기몰당 각기 32.5와 33.5kcal이었고 이값은 polyproline 변광회전의 활성화에너지 (아미드결합의 공명에너지)보다 잔기몰당 10kcal가 높다. 이 과량의 활성화에너지는 폴리머아미드 결합이 시스-트란스 이성질화현상이 일어날 때 카르보닐기와 메틸기 사이에 생기는 입체장애에 의한 것이다.

• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.297-305
• /
• 2011

본 논문에서는 비정상 공기력을 모델링하기위해 Peters-He의 동적유입류모델을 고려한 2차원 준정상 공기력 이론을 적용하여 회전익기 전진비행에 대한 공탄성 해석을 수행하였다. 또한, 공력탄성학적 안정성 해석을 수행하기 위하여, 전진비행 시 주기적인 특성을 갖는 비선형 정적 트림 해를 얻기 위해 동체 평형을 고려한 연계 트림 해석을 통한 완전 유한요소 방정식을 이용하였다. 동적유입류모델의 공력과 구조 특성을 검증하기 위해 유도 유입류와 깃끝에서의 구조변형을 타 수치해석결과와 비교하였다. 또한, 공탄성 안정성을 검증하기 위해 두 모델의 래그 감쇠값을 비교하였다.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.217-227
• /
• 2016

Recent accidents of crude oil tankers have resulted in sinking, grounding of vessels and significant levels of marine pollution. Therefore, International Maritime Organization (IMO) has been strengthening the regulations of ship maneuvering performance in MSC 137. The evaluation of maneuvering performance can be made at the early design stage; it can be investigated numerically or experimentally. The main objective of this paper was to investigate the maneuvering performance of a VLCC due to the increase of rudder force at an early design stage for low speed in shallow water conditions. It was simulated in various operating condition such as deep sea, shallow water, design speed and low speed by using the numerical maneuvering simulation model, developed using MMG maneuvering motion equation and KVLCC 2 (SIMMAN 2008 workshop). The effect of increasing the rudder force can be evaluated by using numerical simulation of turning test and ZIG-ZAG test. The research showed that, increasing the rudder force of a VLCC was more effective on improving the turning ability than improving the course changing ability especially. The improvement of turning ability by the rudder force increasing is most effective when the ship is sailing in shallow water at low forward speed.

• Asia Marketing Journal
• /
• 제16권1호
• /
• pp.35-69
• /
• 2014

The impact of competition on pricing has been studied in the context of counterfactual merger analyses where expected optimal prices in a hypothetical monopoly are compared with observed prices in an oligopolistic market. Such analyses would typically assume static decision making by consumers and firms and thus have been applied mostly to data obtained from consumer packed goods such as cereal and soft drinks. However such static modeling approach is not suitable when decision makers are forward looking. When it comes to the markets for durable products with indirect network effects, consumer purchase decisions and firm pricing decisions are inherently dynamic as they take into account future states when making purchase and pricing decisions. Researchers need to take into account the dynamic aspects of decision making both in the consumer side and in the supplier side for such markets. Firms in a two-sided market typically subsidize one side of the market to exploit the indirect network effect. Such pricing behaviors would be more prevalent in competitive markets where firms would try to win over the battle for standard. While such qualitative expectation on the relationship between pricing behaviors and competitive structures could be easily formed, little empirical studies have measured the extent to which the distinct pricing structure in two-sided markets depends on the competitive structure of the market. This paper develops an empirical model to measure the impact of competition on optimal pricing of durable products under indirect network effects. In order to measure the impact of exogenously determined competition among firms on pricing, we compare the equilibrium prices in the observed oligopoly market to those in a hypothetical monopoly market. In computing the equilibrium prices, we account for the forward looking behaviors of consumers and supplier. We first estimate a demand function that accounts for consumers' forward-looking behaviors and indirect network effects. And then, for the supply side, the pricing equation is obtained as an outcome of the Markov Perfect Nash Equilibrium in pricing. In doing so, we utilize numerical dynamic programming techniques. We apply our model to a data set obtained from the U.S. video game console market. The video game console market is considered a prototypical case of two-sided markets in which the platform typically subsidizes one side of market to expand the installed base anticipating larger revenues in the other side of market resulting from the expanded installed base. The data consist of monthly observations of price, hardware unit sales and the number of compatible software titles for Sony PlayStation and Nintendo 64 from September 1996 to August 2002. Sony PlayStation was released to the market a year before Nintendo 64 was launched. We compute the expected equilibrium price path for Nintendo 64 and Playstation for both oligopoly and for monopoly. Our analysis reveals that the price level differs significantly between two competition structures. The merged monopoly is expected to set prices higher by 14.8% for Sony PlayStation and 21.8% for Nintendo 64 on average than the independent firms in an oligopoly would do. And such removal of competition would result in a reduction in consumer value by 43.1%. Higher prices are expected for the hypothetical monopoly because the merged firm does not need to engage in the battle for industry standard. This result is attributed to the distinct property of a two-sided market that competing firms tend to set low prices particularly at the initial period to attract consumers at the introductory stage and to reinforce their own networks and eventually finally to dominate the market.

• 한국작물학회지
• /
• 제47권5호
• /
• pp.390-394
• /
• 2002

Spikelet number per unit area(SPN) is a major determinant of rice yield. Nitrogen nutrition status and biomass during reproductive stage determine the SPN. To formulate a model for estimating SPN, the 93 field experiment data collected from widely different regions with different japonica varieties in Korea and Japan were analyzed for the upper boundary lines of SPN responses to nitrogen nutrition index(NNI), shoot dry weight and shoot nitrogen content at panicle initiation and heading stage. The boundary lines of SPN showed asymptotic responses to all the above parameters(X) and were well fitted to the exponential function of $f(X)=alphacdot{1-etacdotexp(gamma;cdot;X)}$. Excluding the constant, from the boundary line equation, the values of the equation range from 0 to 1 and represent the indices of parameters expressing the degree of influence on SPN. In addition to those indices, the index of shoot dry weight increase during reproductive stage was calculated by directly dividing the shoot dry weight increase by the maximum value ($800 extrm{g/m}^{-2}$) of dry weight increase as it showed linear relationship with SPN. Four indices selected by forward stepwise regression at the stay level of 0.05 were those for NNI ($I_{NNI}_P$) at panicle initiation, NNI($I_{NNI}_h$) and shoot dry weight($I_{DW}_h$) at heading stage, and dry weight increase($I_{DW}$) between those two stages. The following model was obtained: SPN=48683ㆍ $I_{DWH}$$^{0.482}$ㆍ $I_{NNIp}$$^{0.387}$ㆍ $I_{NNIH}$$^{0.318}$ㆍ $I_{DW}$ $^{0.35}$). This model accounted for about 89% of the variation of spikelet number. In conclusion this model could be used for estimating the spikelet number of japonica rice with some confidence in widely different regions and thus, integrated into a rice growth model as a component model for spikelet number estimation.n.n.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.965-968
• /
• 2005

Roll drafting operation causes variations in the linear density of bundles because the bundle flow cannot be controlled completely by roll pairs. Defects occurring in this operation bring about many problems successively in the next processes. In this paper, we attempt to analyze the draft dynamics and the linear density irregularity based on the governing equation of a bundle motion that has been suggested in our previous studies. For analyzing the dynamic characteristics of the roll drafting operation, it is indispensable to investigate a transient state in time domain before the bundle flux reaches a steady state. However, since governing equations of bundle flow consisting of continuity and motion equations turn out to be nonlinear, and coupled between variables, the solutions for a transient state cannot be obtained by an analytical method. Therefore, we use the Finite Difference Method(FDM), particularly, the FTBS(Forward-Time Backward-Space) difference method. Then, the total equations system yields to an algebraic equations system and is solved under given initial and boundary conditions in an iterative fashion. From the simulation results, we confirm that state variables show different behavior in the transient state; e.g., the velocity distribution in the flow field changes more quickly the linear density distribution. During a transient flow in a drafting zone, the output irregularity is influenced differently by the disturbances, e.g., the variation in input bundle thickness, the drafting speed, and the draft ratio.

• 전기전자학회논문지
• /
• 제6권2호
• /
• pp.136-145
• /
• 2002

정상상태에서 소자 내부의 격자온도 분포를 해석할 수 있는 시뮬레이터를 개발하였다. Slotboom 변수를 사용하여 열흐름 방정식을 이산화하였고, 요소내에서 열전도율의 적분값을 해석적으로 구할 수 있는 방법을 제안하였다. 제안된 방법의 타당성을 검증하기 위해 $N^+P$ 접합 다이오드와 BJT에 대해 모의실험을 수행하였고 DAVINCI와 MEDICI의 결과와 비교하였다. $N^+P$ 접합 다이오드에서 순방향 인가전압이 1.4[V]일 때 격자 온도분포는 DAVINCI의 결과와 2%의 상대오차를 보였으며 BJT에서 컬렉터 전압이 5.0[V]이고 베이스 전압이 0.5[V]일 때 격자 온도분포는 MEDICI의 결과와 3%의 상대오차를 보였다. BANDIS에서 제안된 열전도율의 적분방법을 사용하는 경우 수렴을 위해 평균 3.45회의 행렬 연산이 필요하나 DAVINCI에서는 평균 5.1회의 행렬 연산이 필요하였고 MEDICI는 평균 4.3회 행렬연산이 필요하였다.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.92-100
• /
• 1995

The effect of different anisotropy and stress ratio on fatigue crack propagation behavior was investigated under various stress ratio(R=-0.4, -0.2, 0.2, 0.2, 0.4) using pure titanium sheet used in aerospace, chemical and food industry. The rack closure behavior under constant load amplitude fatigue crack propagation test was examined. Fatigue crack propagation rate da/dN was estimated in terms of effective stress intensity factor range, $\Delta$K$_{eff}$, regardless of various stress ratio but was influenced by anisotropy. Also, it was found that the effect of anisotropy was considerably decreased but still not negligible when he da/dN was evaluated by a conventional parameter, $\Delta$$K_{eff}$/E and when the modified da/dN.$\sqrt{\varepsilon}_f$ was evaluated by $\Delta$$K_{eff}$/E. On the other hand, da/dN could be evaluated uniquely by effective new parameter, $\Delta$K$_{eff}$/$sigma_{ys}$, regardless of anisotropy, as int he following equation da/dN=C''[\frac{{\Delta}K_{eff}}{{\sigma}_{ys}}]^{n''}. And effective stress intensity factor range ratio, U was estimated by the following equation with respect to the ratio of reversed plastic zone size, $\Delta r_{p}$ to monotonic plastic zone size, $r_p$ regardless of stress ratio and anisotropy. U=-4.45$(\Delta r_{p}/r_{p})^{2}$+4.1$(\Delta r_{p}/r_{p})$+0.245_{p})$+0.245