• Transactions of Materials Processing
• /
• v.14 no.9 s.81
• /
• pp.772-778
• /
• 2005

This paper is concerned with the analysis of material flow characteristics of combined tube extrusion using pipe. The analysis in this paper concentrated on the evaluation of the design parameters for deformation patterns of tube forming, load characteristics, extruded length, and die pressure. The design factors such as punch nose radius, die corner radius, friction factor, and punch face angle are involved in the simulation. The combined tube extrusion is analyzed by using a commercial finite element code. This simulation makes use of pipe material and punch geometry on the basis of punch geometry recommended by International Cold Forging Group. Deformation patterns and its characteristics in combined forward and backward tube extrusion process were analyzed for forming loads with primary parameters, which are various punch nose radius relative to backward tube thickness. The results from the simulation show the flow modes of pipe workpiece and the die pressure at the contact surface between pipe workpiece and punch. The specific backward tube thickness and punch nose radius have an effect on extruded length in combined extrusion. The combined one step forward and backward extrusion is compared with the two step extrusion fer forming load and die pressure.

• Structural Engineering and Mechanics
• /
• v.73 no.4
• /
• pp.455-462
• /
• 2020

The hybrid method using the extended finite element method (XFEM) and the forward Euler approach is widely employed to predict the fatigue life of plate structures. Due to the accuracy of the forward Euler approach is determined by a small step size, the performance of fatigue life prediction of the hybrid method is not agreeable. Instead the forward Euler approach, a prediction method using midpoint method and support vector regression (SVR) is presented to evaluate the stress intensity factors (SIFs) and the fatigue life. Firstly, the XFEM is employed to calculate the SIFs with given crack sizes. Then use the history of SIFs as a function of either number of fatigue life cycles or crack sizes within the current cycle to build a prediction model. Finally, according to the prediction model predict the SIFs at different crack sizes or different cycles. Three numerical cases composed by a homogeneous plate with edge crack, a composite plate with edge crack and center crack are introduced to verify the performance of the proposed method. The results show that the proposed method enables large step sizes without sacrificing accuracy. The method is expected to predict the fatigue life of complex structures.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.87-91
• /
• 2004

In this paper, the paralleled forward converter, that is generally used as the power supply for the low voltage, high current load, is described. The proposed forward converter for battery charging could be provided the power without failure not only in steady state but also in the transient period by the step load variation or the unexpected faults among the converter modules. Each converter nodule designed is operated alone with the self closed controller for the elevation of stability, performance, reliability, and maintainability. The frequency response of the designed converter module is analyzed, and the stability is confirmed in analytic method. And the experiments of the paralleled battery charger are carried out in steady state, in the step load variation.

• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.116-126
• /
• 1998

I present a datuming scheme for poststack data that uses wavefield depth extrapolation. The method I have developed allows the use of any depth extrapolation technique, such as phase-shift, split-step, and finite-difference extrapolation. I derive the datuming algorithms by transposing and taking the complex conjugate (i.e. taking adjoint) of the corresponding forward modeling operator, which does upward extrapolation from a flat surface to an irregular surface. The exact adjoint relation between the forward modeling operator and the datuming operator is demonstrated algebraically. Testing the poststack datuming algorithms with synthetic data, using several depth extrapolation algorithms, has shown that the method works well.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.267-268
• /
• 2016

This study aimed to examine the therapeutic effects of backward walking. The subjects were randomly assigned to an experimental group of 16 subjects and a control group of 17 subjects. All subjects walked barefoot for twenty minutes on the treadmill (HM50EX, Daeho, Korea) for five times per week for total four weeks. The average gait velocities of subjects were 3 km/h on a slope of 10%. The experimental group walked back and the control group walked forward. The experimental group showed significant increments in variable of medial-lateral, anterior-posterior, step length, velocity compared to the pre-intervention results. In addition, the control group showed significant increments in the anterior-posterior, velocity compared to the pre-intervention results. Significant differences in the post-training gains in variable of anterior-posterior, step length, velocity were observed between the experimental group and the control group. There were positive effects of backward walking on their gait and balance ability after intervention.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.52-56
• /
• 1986

In this paper a adaptive LMS(least mean-square) lattice predictor, which is composed of the adaptive lattice algorithm and LMS algorithm by Widrow-Hopf, is used to predict the future air pollution of the extraordinary levels in the environmental system. This prediction algorithm is applied to the one-step forward prediction of atmospheric CO concentration by using real observed data. Computer simulation proves that the power in the forward error sequences decreases as the number of stages in the lattice is increased.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.533-537
• /
• 2002

A fast time domain modeling and simulation is performed for the input-series-output-parallel connected 2-switch forward converter Steady-state and large-signal transient responses due to a step load change are simulated. The simulation results are verified through experiments.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.73.3-73.3
• /
• 2008

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.555-556
• /
• 2006

In this paper, we have proposed a novel process using two-step electron beam lithography to fabricate 20 nm T-gates for high performance MODFETs. Two-step lithography reduces electron forward scattering by defining the foot on a thin (100 nm) bottom-layer of polymethyl methacrylate (PMMA) at the second step, the T-gate head having been developed at the first step. Adopting a low temperature development technique for the second step reduces the detrimental effect of head exposure on foot definition. We have shown that 20 nm T-gate can be patterned with this process.

• Structural Engineering and Mechanics
• /
• v.87 no.5
• /
• pp.431-450
• /
• 2023

In this study, it is intended to perform nonlinear time-history analyses of nuclear power plant structures (NPP) under near-fault earthquakes showing directivity pulse and fling-step characteristics. Simulation procedures based on cycloidal pulse and far-fault ground motions are also used to simulate near-fault motions showing forward-directivity and fling-step characteristics and the structural responses are compared with those of the recorded near-fault ground motions. Because it is aimed to determine specifically the pulse type characteristics of near-fault ground motions on NPPs, all the ground motions are normalized to have a PGA of 0.3 g. Depending on the obtained results it can be underlined that although near-fault ground motion has the potential to cause damage mostly on structural systems having larger periods, it may also have noticeable effects on the responses of rigid structures, like NPP containment buildings. On the other hand, simulated near-fault motions can help us to get an insight into the near-fault mechanism as well as an approximate visualization of the structural responses under near-fault earthquakes.