• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.855-862
• /
• 2001

본 논문에서는 백색잡음과 페이딩 환경하의 통신시스템의 성능평가시 백색잡음에 대해서만 모멘트 기법을 이용조건부 오류확률을 구하고 페이딩에 대해서는 해석적 접근방식을 취함으로써 전체적인 컴퓨터 수행시간을 획기적으로 개선시킬 수 있는 기법을 제안하고, 제안된 기법의 효율성을 컴퓨터 시뮬레이션 수행시간 비교를 통해 입증하였다. 현재 널리 사용되는 Monte Carlo 시뮬레이션 기법은 IS-95 순방향 채널과 같이 많은 샘플수를 필요로 하는 시스템에서 상당한 시뮬레이션 수행시간을 요구하게 된다. 이러한 문제점을 해결하기 위하여, 제안된 방식에서는 백색잡음하의 수신신호의 N차 모멘트를 측정하여 이산확률밀도함수를 구함으로써 수신신호의 확률적 특성을 모사하고, 이로부터 내삽법과 외삽법을 적용하여 조건부 누적확률분포함수를 산출함으로써 채널오류율을 구하게 된다. 그리고 페이딩 성능평가시 조건부 채널오류율을 이용하여 산출된 조건부 누적확률분포함수를 환경조건에 맞춘 후에 페이딩의 확률밀도함수와 수치 해석적으로 간단히 적분하여 성능평가를 함으로써 수행시간의 줄임과 동시에 정확한 채널오류율을 구하게 된다.

• International Journal of Contents
• /
• v.14 no.1
• /
• pp.18-27
• /
• 2018

The objective of this study was to derive approximate closed-form error rates for M-ary burst symbol transmission (MBST) of dual-hop adaptive decode-and-forward (ADF) cooperative relay systems over quasi-static Rayleigh fading channels. Within a burst, there are pilot symbols and data symbols. Pilot symbols are used for channel estimation schemes and each relay node's transmission mode selection schemes. At first, our focus was on ADF relay systems' error-events at relay nodes. Each event's occurrence probability and probability density function (PDF) were then derived. With error-event based approach, we derived a tractable form of PDF for combined signal-to-noise ratio (SNR). Averaged error rates were then derived as approximate expressions for arbitrary link SNR with different modulation orders and numbers of relays. Its accuracy was verified by comparison with simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.855-861
• /
• 2005

Two-dimensional orthogonal variable spreading codes are presented far multiplexing of forward link in direct sequence code division multiple access(DS-CDMA) multiple antennas system. The bit error rate(BER) performance under a multi-user environment fur the additive white Gaussian noise(AWGN) channel and Rayleigh fading MIMO channel are evaluated. The results demonstrate that the proposed scheme could provide flexible rates and lower peak correlation values.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.397-400
• /
• 1991

This paper presents a cartesian space decentralized adaptive controller design for the end effector of the robot manipulator to track the given desired trajectory in the cartesian coordinate. By the cartesian based control scheme, the task related high level motion command is directly executed without solving the complex inverse kinematic equations. The controller does not require the complex manipulator dynamic model, and hence it is computationally very efficient. Each degree of freedom of the end effector on the cartesian space is controlled by a PID feedback controller and a velocity acceleration feed forward conpensation part. Simulation results for a two-link direct drive manipulator conform that the present cartesian based decentralized scheme is feasible.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.8
• /
• pp.498-500
• /
• 2005

In a CDMA system, the capacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power The capacity of CDMA2000 1x system is considered to be limited by the forward link capacity Different rate data traffic requires different transmitted power and rate controlling enables the system utilize radio resource more efficiently. A very simple rate control algorithm for data calls in CDMA2000 1x system is proposed. In the proposed algorithm, by monitoring the total transmit power, we can simply adjust data rate to channel conditions and efficiently use radio resources. The proposed algorithm is easy to implement in power controlled CDMA systems.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.812-814
• /
• 1999

In this paper, we propose a new control algorithm based on the neural network(NN) feedback compensation with a desired trajectory modification. The proposed algorithm decreases trajectory errors by a feed-forward desired torque combined with a neural network feedback torque component. And, to robustly control the tracking error, we modified the desired trajectory by variable structure concept smoothed by a fuzzy logic. For the numerical simulation, a 2-link robot manipulator model was assumed. To simulate the disturbance due to the modelling uncertainty. As a result of this simulation, the proposed method shows better trajectory tracking performance compared with the CTM and decreases the chattering in control inputs.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.4
• /
• pp.1-19
• /
• 2003

This paper studies power and rate control for data users on the forward link of CDMA system with two cells. The QoS for data users is specified by delay and error rate constraints as well as a family of utility functions representing system throughput and fairness among data users. Optimal power and rate allocation problem is mathematically formulated as a nonlinear programming problem, which is to maximize total utility under delay and error rate constraints, and optimal power and rate allocation scheme (OPRAS) is proposed to obtain a good solution in a fast time. Computational experiments show that the proposed scheme OPRAS works very well and increases total utility compared to the separate power and rate allocation scheme (SPARS) which considers each cell individually.

• Computers and Concrete
• /
• v.8 no.5
• /
• pp.541-561
• /
• 2011

The Finite Element Method (FEM) was employed to demonstrate that accurate simulations of seismically repaired and retrofitted reinforced concrete shear walls can be achieved provided a good analysis program with comprehensive models for material and structural behaviour is used. Furthermore, the analysis tool should have the capability to retain residual damage experienced by the original structure and carry it forward in the repaired and retrofitted structure. The focus herein is to provide quick, simple, but reliable modelling procedures for repair and retrofitting strategies such as concrete replacement, addition of diagonal reinforcing bars, bolting of external steel plates, and bonding of external steel plates and fibre reinforced polymer sheets, thus illustrating versatility in the modelling. Slender, squat, and slender-squat shear walls were investigated. The modelling utilized simple rectangular membrane elements for the concrete, truss bar elements for the steel and FRP retrofitting materials, and bond-link elements for the bonding interface between steel or FRP to concrete. The analyses satisfactorily simulated seismic behaviour, including lateral load capacity, displacement capacity, energy dissipation, hysteretic response, and failure mode.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.221-223
• /
• 2005

In a CDMA system, the capacity is variable and mainly depends on multiple access interference. The multiple access interference has a deep relationship with transmitted or received power. The capacity of CDMA2000 1x system is considered to be limited by the forward link capacity. Different rate data traffic requires different transmitted power and rate controlling enables the system utilize radio resource more efficiently. A very simple rate control algorithm fer data calls in CDMA2000 1x system is proposed. In the proposed algorithm, by monitoring the total transmit power, we can simply adjust data rate to channel conditions and efficiently use radio resources. The proposed algorithm is easy to implement in power controlled CDMA systems.

• Journal of Ship and Ocean Technology
• /
• v.4 no.4
• /
• pp.1-18
• /
• 2000

The paper describes a formalisation of a Design for Safety methodology in an integrated envi-ronment, outlines early developments of a software tool, and presents the results of an appli-cation of the methodology to a case study. The approach adopted attempts link safety per-formance prediction through the utilisation of appropriate technical tools, safety assessment deriving from risk-based methodologies and disparate design activities and issues. Black-board systems have been utilised as the platform in the development of the integrated design environment, allowing safety assessment to become an integral part of the design process. Finally, the case study addresses the application of the developed methodology to three dif-ferent arrangements of a conventional passenger Ro-Ro vessel, with the aim to demonstrate the validity of the process and methodology adopted. The findings are presented and dis-cussed, and recommendations given for the way forward.