• Journal of Chest Surgery
• /
• v.39 no.10 s.267
• /
• pp.770-774
• /
• 2006

Background: Continuous air leakage through chest tube after lung surgery may increase pt's hospital stay and lead to many complications including empyema etc. Chemical pleurodesis has frequently been used for prevention of air leakage. Therefore, we performed chemical pleurodesis using diluted fibrin glue in patients with continuous air leak-age and observed the effects and efficiency of treatment. Material and Method: From September, 2001 to August, 2005, 16 patients whose continuous air leakage lasted more than 7 days underwent chemical pleurodesis with diluted fibrin glue. The effects of treatment, complications and recurrences were reviewed. Dissolved fibrinogen 1.0 g and aprotinin 500,000 KIU were mixed in a 50 cc syringe (Mixed solution A). And dissolved thrombin 5,000 IU and Calcium chloride 600 mg were mixed in a 50 cc syringe (Mixed solution B). Cefazolin 1.0 g was mixed in a 50 cc syringe (Mixed solution C). Rubber tube was inserted between the chest tube and the collecting bottle. An inserted rubber tube was positioned 60cm above the patient and forming a loop appearance was done. Mixed solutions A, B and C were injected into the highest rubber tube. Results: Continuous air leakages disappeared in all f6 patients at next day. Chest tubes were removed after 3 days in all patients. Complications were chest pain in 12 patients (75%), leukocytosis in 14 patients (88%), fever and chill in 14 patients (88%). All complications were transient and disappeared without specific treatment. Conclusion: Our findings demonstrated that diluted fibrin glue chemical pleurodesis was effective in patients with continuous air leakage lasting more than 7 days. Diluted fibrin glue chemical pleurodesis had good results with acceptable complications. long term follow-up is necessary to evaluate the accurate effects of treatment and recurrence in a large number of patients.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.9 no.2
• /
• pp.162-168
• /
• 2006

Purpose: Microbial colonization of the intestine begins just after birth and development of the normal flora is a gradual process. The first bacteria colonizing the intestine in newborns are Staphylococcus, Enterobacteriaceae and Streptococcus. For several days after birth, the number of Bifidobacterium spp. increase. The aim of this study was to investigate the changes of microflora for seven days postnatally in neonatal stool. Methods: Fifteen neonates (breast : formula : mixed feeding 1 : 8 : 6, vaginal delivery : cesarean section 3 : 12) who were born at the Kangdong Sacred Heart Hospital, Hallym University were enrolled. First meconium and stools of postnatal 1-, 3-, and 7-day were innoculated. Blood agar plates for total aerobes, trypton bile X-glucuronide agar for E. coli, phenylethyl alcohol agar for gram positive anaerobes, MRS agar for Lactobacillus spp., bifidobacterium selective agar for Bifidobacterium spp. and cefoxitin-cycloserine-fructose agar for Clostridium difficile were used in the general incubator ($CO_2$ free incubator), $CO_2$ incubator or the anaerobic chamber for 48 or 72 hours at $37^{\circ}C$ and then colony forming units were counted. Results: No microflora was identified in the first meconium. Total aerobes, E. coli, and gram positive anaerobes were significantly increased with advancing postnatal days. In only one baby, Lactobacillus acidophilus was detected $2{\times}10^5CFU/g$ in the seven-day stool. Bifidobacterium spp. was detected in two babies. Clostridium difficile was not detected during the seven days. There were no significant differences in the bowel flora depending on the delivery pattern and feeding method. Conclusion: This study shows many changes in the intestinal normal flora in neonatal stool during seven days postnatally. If these findings are confirmed with larger studies, the data may be preliminary findings to support use of probiotics in neonates.

• Korean Journal of Microbiology
• /
• v.39 no.3
• /
• pp.166-174
• /
• 2003

Microcystin produced by cyanobacteria in surface waters, such as eutrophic lake and river, is a kind of serious environmental problems due to its toxicity to human and wild animals. Microcystin is synthesized nonribosomally by the large modular multi-functional enzyme complex known as microcystin synthetase encoded by the mcy gene cluster. Amplification of mcy genes by PCR from cultures and environmental samples is a simple and efficient method to detect the toxigenic Microcystis. In order to evaluate primers designed to detect toxic microcystin-producing strains, 17 cyanobacterial strains and 20 environmental samples were examined by PCR with 7 pairs of primers. Some microcystin-producing cyanobacteria were not detected with FAA-RAA, TOX4F-TOX4R and FP-RP primers. The fragment of unexpected size was amplified with NSZW2-NSZW1 primers in Microcystis strains isolated from the lakes in Korea. TOX1P-TOX1F primers failed in amplification of toxin-producing strains. Only MSF-MSR and TOX2P- TOX2F primers amplified the fragments of mcy genes from 11 strains of microcystin-producing Microcystis. The water samples taken from 20 lakes in Korea were analyzed by PCR using each of the primers. In all the water samples, cyanobacteria capable of producing microcystin were detected by the PCR with TOX2P-TOX2F primers. These results indicate that TOX2P-TOX2F primers are better than the other primers for detection of microcystin-producing Microcystis strains in Korea. The nucleotide sequences of mcy gene in Microcystis aeruginosa NIER10010 suggest genetic diversity of Korean isolates.

• Journal of Korean Home Economics Education Association
• /
• v.30 no.1
• /
• pp.15-28
• /
• 2018

Teachers are not completed by appointment, but gradually made through self-development and training for a long time. In order to improve a sense of responsibility of home economics teachers, and also to suggest the purpose and direction of program through job training, the needs of training subjects should be preferentially understood. Thus, this study aims to provide basic data for establishing the developmental operation measures of training for home economics teachers, by researching the needs for training performed after the qualification training for first-grade teachers, targeting the teachers participating in the qualification training program for first-grade teachers of home economics in 2017. About the half of the research subjects received the home economics training one time or less for last three years. Through the training for first-grade teachers, the technical improvement of lesson instruction was demanded the most. As professional qualifications that should be cultivated through training, the ability to develop teaching methods and teaching/learning materials was the highest. Regarding the theme of training, the development of teaching/learning materials for home economics was desired the most. They wanted the training method including direct participation with high utilization for lesson, sublation of competition-centered evaluation, preference of instructors with field experience, continuous opportunity of home economics training, and communicative training. Regarding the needs for the 2015 revised curriculum, the demand for the training of 'human development and family' area was the highest. Therefore, in order to improve the professionalism of teachers through home economics training, it would be necessary to improve the educational environment such as temporal room for training and administrative support, and also to provide diverse types of training like group training, remote training, and smartphone app training suitable for changes in the generation of teachers. Also, on top of forming communities of home economics teachers, and sharing great contents of training, there should be individually-customized training for practice and sharing lesson cases.

• 대한공업교육학회지
• /
• v.41 no.2
• /
• pp.48-68
• /
• 2016

This study was conducted to identify the NCS-related research trends, Keywords, the Keywords Networks and the extension of the Keywords using the sementic network analysis and to seek for the development plans about NCS. For this, the study searched 345 the papers, with the National Competency Standards or NCS as a key word, among master's theses, dissertations and scholarly journals that RISS provides, and selected a total of 345 papers. Annual frequency analysis of the selected papers was carried out, and Semantic Network Analysis was carried out for 68 key words which can be seen as key terms of the terms shown by the subject. The method of analysis were KrKwic software, UCINET6.0 and NetDraw. The study results were as follows: First, NCS-related research increased gradually after starting in 2002, and has been accomplishing a significant growth since 2014. Second, as a result of analysis of keyword network, 'NCS, development, curriculum, analysis, application, job, university, education,' etc. appeared as priority key words. Third, as a result of sub-cluster analysis of NCS-related research, it was classified into four clusters, which could be seen as a research related to a specific strategy for realization of NCS's purpose, an exploratory research on improvement in core competency and exploration of college students' possibility related to employment using NCS, an operational research for junior college-centered curriculum and reorganization of the specialized subject, and an analysis of demand and perception of a high school-level vocational education curriculum. Fourth, the connection forming process among key words of domestic study results about NCS was expanding in the form of 'job${\rightarrow}$job ability${\rightarrow}$NCS${\rightarrow}$education${\rightarrow}$process, curriculum${\rightarrow}$development, university${\rightarrow}$analysis, utilization${\rightarrow}$qualification, application, improvement${\rightarrow}$plan, operation, industry${\rightarrow}$design${\rightarrow}$evaluation.'

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.1
• /
• pp.5-13
• /
• 2002

Background: DNA repair plays a crucial role in protecting the genome from cancer-causing agents. Therefore, a reduced DNA repair capacity can increase the susceptibility to cancer. The human OGG1 (hOGG1) gene encodes DNA glycosylase/apurinic lyase and excise 8-hydroxyguanine, one of the major premutagenic DNA lesions, which is produced by oxygen radical forming agents including smoking. Recently several polymorphisms in the hOGG1 gene were identified, and it is possible that these polymorphism') may affect the DNA repair capacity and thus modulate cancer susceptibility. The relationship between the codon 326 polymorphism (Ser to Cys) in the hOGG1 gene and lung cancer risk was investigated. Materials and Method: The Ser326Cys genotypes were determined using PCR-RFLP analysis in 299 primary lung cancer patients and 186 healthy controls who were frequency (case:control=3:2) matched according to age and sex. Result: The frequencies of the Ser326Cys genotypes (Ser/Ser, Ser/Cys and Cys/Cys) among cases (23.4%, 51.8%, and 24.7%, respectively) were not significantly different from those among the controls (22.6%,52.1% and 25.3%, respectively). When the analyses were stratified according to age, sex, smoking status and packyears of smoking, no significant association between this polymorphism and lung cancer risk was found. Moreover, the Ser326Cys genotype showed no apparent relationship with any of the histological types of lung cancer. Conclusion: These result suggest that the hOGG1 Ser326Cys polymorphism is not a major contributor to individual lung cancer susceptibility in Koreans.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.207-216
• /
• 2020

Purpose: To compare the polishing characteristics and their influence on Candida albicans adhesion to the recently introduced polyetherketoneketone (PEKK) and the conventional polymethylmethacrylate (PMMA) denture resin material. Materials and methods: Specimens from PEKK (Group E) and PMMA (Group M) were made in dimensions of 8 mm in diameter and 2 mm in thickness. The specimens were further divided into sub-groups according to the extent of polishing (ER, MR: rough; EP, MP: polished, N = 12 each). The specimens were polished using polishing machine and SiC foil. ER and MR group specimens were polished with 600 grit SiC foil only. EP and MP groups were further polished with 800, 1,000, 1,200 grit SiC foils sequentially. To measure the surface roughness values (Sa) of specimens, atomic force microscope (AFM) was used and scanning electron microscope (SEM) observation under 1,000, and 20,000 magnifications was performed to investigate surface topography. The polished specimens were soaked in C. albicans suspension for 2 hours with shaking to promote adhesion. The attached C. albicans were detached from the surface with 10 times of pipetting. The suspension of detached C. albicans was performed by serial dilution to 10³ times, and the diluted suspensions were inoculated on Sabouraud dextrose agar plates using spread plate method. After incubating the plate for 48 hours, colony forming unit (CFU)/plate of C. albicans was counted. Statistical analysis was performed using one-way ANOVA and Tukey HSD test to confirm significant difference between the groups (α=.05). Results: Average Sa value was significantly higher in MR group compared to other groups (P<.05), meaning that additional polishing steps reduced surface roughness effectively only in the PMMA specimens. There was no significant difference in Sa values between MP and EP groups. In SEM images, PEKK specimens showed numerous spikes of abraded material protruding from the surface and this phenomenon was more significant in EP group. The mean CFU/plate value was the highest in EP group and this was significant when it was compared to MP group (P<.05) which was the lowest. Conclusion: Polishing PEKK using serial SiC abrasive foil may result in higher adhesion of C. albicans. In clinic, this should be considered carefully.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.375-391
• /
• 2014

Animation movie is a non-photorealistic animated art that consists of formative language forming a frame based on a story and cuts describing frames that form the cuts. Therefore, in expressing an image, artistic expression methods and devices for a formative space are should be provided in a frame while cuts have the images between frames faithfully. Short animation movie is produced by various image experiments with unique image expressions rather than narration for expressing subjective discourse of a writer. Therefore, image style that forms unique images and various image directions are important factors. This study compared the experimental image directions of and , both of which showed a production method of film manipulation. First, while uses pixilation that produces images obtained from live images through painting and many optical disclosure process on a cell mat, was made with diverse collage techniques such as tearing, cutting, pasting, and folding hundreds of scenes from action movies. Second, expresses non-causal relationship of characters by their repetitive behaviors and circulatory image structure through a fixed camera angle, resisting typical scene transition. On the other hand, has an advancing structure that progresses antagonistic relationship of characters through diverse camera angles and scene transition of unique images. Third, in terms of editing, uses a long-take short cut technique in which the whole image consists of one short cut, though it seems to be many scenes with the appearance of various characters. On the other hand, maximizes visual fun and commitment by image reconstruction with hundreds of various short cuts. That is, both works have common features of an experimental work that shows expansion of animated image expressions through film manipulation that is different form general animation productions. On top of that, delivers routine life of diverse human beings without clear narration through image of conceptualized spaces. expresses it in a new image space through image reconstruction with collage technique and speedy progress, setting a binary opposition structure.

• The Korean Journal of Petroleum Geology
• /
• v.2 no.2 s.3
• /
• pp.51-57
• /
• 1994

Analysis of the aeromagnetic data aquired by US Navy in the year 1969 permits us to predict a new sedimentary basin, Heugsan Basin, south of the known Gunsan Basin in Block Ⅱ. The basin appears to consist of three sub-basins trending NNW-SSE. The results of our analysis provide not only an independent assessment of the Gunsan Basin, but also new important information on the tectonic origin and mechanism for the two basins as well as for the entire region. The basin forming tectonic style is interpreted as rhombochasm associated with double overstepped left-lateral wrench faults. From the magnetic evidence, a few NE-SW trending major onshore faults are extended to the study area. We also interpreted the nature of the faults to be left-lateral wrenches. This new gross structural style is consistent with the results of recent Yeongdong Basin analysis by Lee. The senses of fault movement are also supported by the paleomagnetic evidence that the Philippine Sea had experienced an 80-degree clockwise rotation since the Eocene. Based on a 2 $\frac{1}{2}$ model study the probable maximum thickness of the sediments in the Gunsan Basin is approximately 7500 meters. We believe that the new Heugsan Basin was left unidentified because a high velocity layer may be overlying the basin. Because the overall structural configuration of the Heugsan Basin appears to be favorable for hydrocarbon accumulation, a detailed airborne magnetic survey is recommended in the area in order to verify the magnetic expression of this thick basin. A detailed subsequent marine gravity survey is also recommended in order to delineate the sedimentary section and to acquire supplemental data to the magnetic method only if an overlying high velocity layer is confirmed. Otherwise a high energy source seismic survey may be more effective.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.