• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.213-220
• /
• 2020

When CO₂ foam is injected into the saline aquifer, the relative permeability of CO₂ decreases and its viscosity increases, thereby reducing mobility in porous media and ultimately improving CO₂ storge with enhanced sweep efficiency. In general, surfactants were used to fabricate CO₂ foam. Recently, nanoparticles have been used to form stable foam than surfactant. This paper introduces CO₂ storage technology using nanoparticle stabilized CO₂ foam. If the surface of the hydrophilic nanoparticles is partially modified into a CO₂-philic portion, the particles have an affinity for CO₂ and water, thus forming a stable CO₂ foam even in deep saline aquifers under high temperature and high salinity conditions, thereby it can be stored in the pores of the rock. In terms of economics, injection method using nanopaticle-stabilized CO₂ foam is more expensive than the conventional CO₂ injection, but it is estimated that it will have price competitiveness because the injection efficiency is improved. From an environmental point of view, it is possible to inject chemical substances such as surfactants and nanomaterials into aquifers or reservoirs for specific purposes such as pollutant removal and oil production. However, some studies have shown that nanoparticles and surfactants are toxic to aquatic animals, so environmentally proven substances should be used. Therefore, further research and development will be needed to study the production and injection of nanoparticle-stabilized CO₂ foam that are environmentally safe and economically reasonable.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.143-154
• /
• 2005

Typography in visual communication design is 'potential form' hidden within a space. Showing rhythm in typography is making 'aesthetic sense' in a graphic which has formative characteristics, the way of expression is very important. When the rhythm is recognized through visual stream, Rhythmic Sense is formed. The research will present a new form of the Visual Rhythmic Sense by analyzing typography works out positively. First of all, I researched works done by Fillippo Marinetti, Robert Massin, Wolfgang Weingart, and David Carson for their vigorous experimentalism in typography in forming visual rhythm. I used S.D. Scale method to analyze characteristics of visual image and VARIMAX for factor analysis reaching types of visual rhythm, which could be classified as following. (1) Synesthesia Rhythmic Sense (R-synesthesia) means that the senses are conveyed through 'visualization of auditory sense' and 'visualization of touch' (2) Simultaneous Rhythmic Sense (R-simultaneity) means that the time and space co-exist in one plane. (3) Connective Rhythmic Sense(R-connection) means that different factors (Within one plane) co-exist interacting with one another and creating a unified impression through such a process. (4) Artist Oriented Rhythmic Sense ($-artist) means that the artist interprets the content subjectively and expresses his/her impression, thereby, attracting a gaze of audience systematically and arbitrarily. (5) Reader Oriented Rhythmic Sense(R-reader) avoids the existing legibility formed through aggressive engagement of the reader.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.501-512
• /
• 2018

The acid leachate derived from the sulfide mineral such as pyrite can cause problems such as aging of infrastructure and environment contamination around the civil construction site. The purpose of this study is to assess the environmental effect of an acid leachate derived from pyrite in the Miryang area under road construction. In this study, 13 samples of situ core were used for the net acid generation (NAG) experiment. The chemical composition including pH, oxidation and reduction potential (ORP) and electrical conductance of water samples produced from the NAG test was analyzed. In additional, five polished thin sections of rock cores were made for electro microprobe analyses. In the results of the NAG tests, 7 samples showed lower values than pH 3.5. It strongly indicated that these areas are under the environmental and infrastructure damage by the acid leachate. The chemical type of the 7 samples was classified as the $Fe(Ca)-SO_4$ type, which is totally a different type compared to general groundwater. The concentration of total sulfur ranges from 0.004% to 12.5%. 6 rock samples are plotted on a potentially acid forming zone in the relation diagram between the total sulfide and NAG-pH. In conclusion, it is suggested that a protection method against an environmental demage and an infrastructure corrosions by the acid leachate should be prepared in all of areas under a road construction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.692-696
• /
• 2017

The shape of press components is becoming increasingly complex due to customer demands, process shortening and cost savings. In addition, the stability of the pressing process frequently varies during mass production due to the influence of many factors. In order to ensure the process stability, it is necessary to establish a process in which reproducibility is realized in tolerance, which is sufficient for advance study of shape, material, press, mold and lubrication. However, unforeseen changes in process parameters cause disruptions in production line shutdowns and production planning. In this paper, we introduce a method to monitor a real time process by applying a sensor to a press mold. A non-contact type sensor for measuring the flow of a sheet material and an example of an experiment using the optical sensor which is highly applicable to mass production are presented. An optical sensor was installed in a cylindrical drawing mold to test its potential application while changing the material, blank holder force, and drawing ratio. We also quantitatively determined that the flow of other sheet materials was quantified locally using a square drawing die and that the measured value was always smaller than the drawing depth due to the material elongation. Finally, we propose a field that can be used by attaching the sensor to the press mold. We hope that the consequent cost reduction will contribute to increasing global mold competitiveness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.689-697
• /
• 2020

Hazardous and noxious substances (HNS) may cause maritime incidents during marine transportation, which are liable to lead to a large amount of spillage or discharge into the sea. The damage to the marine environment caused by the HNS spill or discharge is known to be much greater than the damage caused by oil spill. Particularly dangerous is HNS, which is deposited or buried in the seabed, as it can damage the organisms that live on, in, and near the bottom of the sea, the so-called "benthos," forming the benthic ecosystem. Therefore, it is vital that the HNS deposited on the seabed be recovered. In order to do so, procedures and equipment are required for accurate detection, stabilization treatment, and recovery of HNS in subsea sediment. Thus, when developing a mechanical recovery system, the performance requirements should be selected using performance indices, and the conceptual design of the mechanical recovery system should be based on performance requirements decided upon and selected in advance. Therefore, this study was conducted to arrive at a conceptual design for a mechanical recovery system for the recovery of HNS deposited on the seabed. In the design of the system, based on the fundamental scenario, the method of suction foundation with the function of self enclosing was adopted for recovering the HNS sediment in the subsea sediment. The mechanical recovery system comprises the suction foundation, pollution prevention, a pump system, control system, monitoring device, location information device, transfer device, and tanks. This conceptual design is expected to be reflected and used in the basic design of the components and shapes of the mechanical recovery system.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.417-422
• /
• 2005

This study was aimed to design and formulate the moisture-activated patches containing ofloxacin and lidocaine for antibacterial and local anesthetic action. The solubility of lidocaine at $32^{\circ}C$ in various vehicles decreased in the rank order of PG $759.5{\pm}44.5\;mg/mL$ > PGL > IPM > PEG 300 > PEG 400 > Ethanol > PGMC > DGME > PGML > OA > $Captex^{\circledR}\;300$ > $Captex^{\circledR}\;200$ > water $(4.0{\pm}0.1\;mg/mL)$. Ofloxacin revealed very low solubility, which the highest solubility was obtained from PEG 400 $(18.7{\pm}6.3\;mg/mL)$ among the vehicles used. The addition of lactic acid increased the solubility of ofloxacin dramatically; the solubility at 5% lactic acid was $133.7{\pm}9.7\;mg/mL$. As $2-hydroxypropyl-{\beta}-cyclodextrin$ was added at the concentrations of 40, 80, 120, 160 and 200 mM, the solubilities of lidocaine and ofloxacin were enhanced up to three and two times, respectively, with concentration-dependent pattern. Gel intermediates for filmtype patches were prepared with mucoadhesive polymer, viscosity builders, lidocaine or ofloxacin at pH values from 5 to 7. Gels were cast onto a release liner and dried at room temperature. Dried patch was attached onto an adhesive backing layer, thus forming a patch system. Patches containing a single drug component were characterized by in vitro measurement of drug release rates through a cellulose barrier membrane. The release study was carried out at $37^{\circ}C$ using a Franz-type cell. Receptor solutions were isotonic phosphate buffers (pH 7.4). Samples $(100\;{\mu}L)$ were taken over 24 hours and quantitated by a verified HPLC method. The releases from all tested were proportional to the square root of time. The release rates were 0.9, 157.3 and $281.7\;{\mu}g/cm^{2}/min^{1/2}$ for the lidocaine patches and 19.8,37.2 and $50.7\;{\mu}g/cm^{2}/min^{1/2}$ for the ofloxacin patches at the concentrations of 0.3, 0.5 and 1 %, respectively. The release rates were dose dependent in both drug patches $(R^{2}\;=\;0.9077\;for\;lidocaine;\;R^{2}\;=\;0.9949\;for\;ofloxacin)$ and those were also thickness-dependent $(R^{2}\;=\;0.9246\;for\;lidocaine;\;R^{2}\;=\;0.9512\;for\;ofloxacin)$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.2
• /
• pp.237-243
• /
• 2020

Listeria sp. is one of the pathogenic bacteria causes the infection listeriosis, through mainly raw food such as fishery food, dairy food and vegetables. Listeria sp. is a Gram-positive, non-spore-forming, motile, and facultative anaerobic bacterium. Because of the tolerance of Listeria sp. to low temperature and high salt concentration, it is very difficult to prevent them contaminated in the food, which do not require heating, especially, such as raw fishery products. So prevention and removal of bacterial contamination at the food manufacturing stage is the best method. In this study, therefore, several natural products including Psidium guajava and Geranium thunbergii were screened to investigate the antibacterial activity against Listeria sp., with expectation of fewer side effects and fewer resistance problems. Significant effects of two extracts were confirmed by well diffusion assay, MIC assay, and growth inhibition assay. P. guajava and G. thunbergii showed MIC values at 64-256 ㎍/mL meaning strong antibacterial activities against 6 kind of Listeria sp. tested. And the growth of Listeria sp. in the liquid media was actually inhibited by the addition of these two extracts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.285-293
• /
• 2017

The purpose of this study is to examine the relationship between the Minnesota Multiphasic Personality Inventory(MMPI-2) clinical scales and the self-regulation quotient of the brain quotient. The test in this study was performed by 41 adults over 20 years old and was done using the MMPI-2, which is a self-reporting method. EEG was performed using a 2-channel EEG System at Fp1 and Fp2. The analysis showed a negative correlation between scale 2(D), which is the MMPI-2 clinical scale, and the SRQ(Self Regulation Quotient) relaxation status, which is the related alpha rhythm. Scale3(Hy) showed a positive correlation with the SRQ concentration status and low ${\beta}$ rhythm. Scale7 in the MMPI-2 clinical scales showed a negative correlation with the SRQ relaxation status, which is the alpha rhythm. This means that MMPI-2 and SRQ can be used complementarily in the field of counseling. These results could be interpreted in three ways. First, people with depression are sensitive to other people's attention and evaluation. Therefore, they tend to expend a lot of energy when forming interpersonal relationships, and if they do not learn to relax, their fatigue can easily be increased. Second, people who seek other people's interest and have a cheerful spirit are considered to be highly active. Third, highly stressed people with anxiety and tension seem to easily become tired and their irritation and discomfort may be increased in consequence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.349-355
• /
• 2017

Bending work using press dies involves bending a flat blank to a desired angle. The bending produces a flange (the bent part) and a web (the unbent part). The bending line will have a bending angle, and there is an inner and outer bending radius. The minimum inner radius size is determined by the material used. When the inner radius size is too small, there will be excess metal welding, which will cause a crack in the outer radius part. The outer bending radius size cannot be controlled by a bending punch and die block. Types of bending include V-bending, U-bending, O-bending, edge bending, twist bending, and crimping. Z-bending involves two bending lines, which are set on the upper side and under surface of the blank, respectively, and upward or downward bending is used. Z-bending is also called crank bending. Z-bending using this type of die structure will produce a standard inner bending radius. The standard size is the minimum bending radius that represents the angle radius of the bending punch. In industry, there is a need for a sharp edge shape with a very small size (R=0.2mm), but that is not possible when using bending punch and die block. The purpose of this research is to meet the need by development.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3795-3814
• /
• 1975

The purpoes of this thesis is to study the effect of the variation of the beginning date of the suspension of irrigation and the length of intermittent suspension period of irrigation in the paddy field on the growth and yield of rice, so as the provide a critical limit of saving irrigation water and an irrigation method to prevent drough damage in rice cultivation. In this experiment, the rice variety adopted was NONGRIM No.29. There were seven main test plot, each test plot having a different beginning date of the suspension of irrigation. A main test plot was susdivided into five small test plots, each having a different length of the suspension period of irrigation. The results obtained in this experiment are summarized as follows: 1. The number of tillers is controlled by the treatment of the suspension of irrigation, its beginning date being early of late. The reductive effects of beginning dates of suspension upon the number of tillers. investigated on July 30, are about 84% for the treatment suspended on July 8, 87% on July 12, and 92% on July 19, respectively, in comparison with the standard plot. However. the suspenion treatments after the foregoing dates does not affect the control of their numbers. On the other hand, the lengths of intermittent suspension periods influence highly on the number of tillers to be restrained considerably, the decrease ratio ranging from 91% to 80% Both treatments on dates and periods are so intermingled that the restraining effects of suspension periods become greater as the dates of its beginning are earlier. 2. The elongation of plant hieghts also restrained considerably by the longer periods and earlier dates of suspension treatments of irrigation. Especially, the effects of the lengths of suspension periods become more serious. 3. Heading dates are delayed by two to five days through the suspension treatments of irrigation. However, the heading stage ends almost on the same day without relation to the differences between the irrigation suspension treatments. In the test plot where the suspension date of irrigation comes after the young panicle forming stage, the heading stage ends one or two days later than in the standard test plot. 4. Both culm lengths and panicle lengths show significant differences in their values, i.e., their lengths are shorter, as the begining dates of irrigation suspension are earlier and the suspension periods are longer. 5. The earlier the beginning date and the longer the period of irrigation suspension, the less is the number of panicles per hill in comparison with the standard plot. 6. The earlier the beginning date and the longer the period of irrigation suspension, the higher is the significant difference in the number of kernels per panicle in comparison with that in the standard test plot, i.e., the less is the number of kernels per panicle. 7. The earlier the beginning date and the longer the period of irrigation suspension, the lighter are the weights of rough rice and straws per hill in comparison with those in the standard plot.