• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.21-24
• /
• 2003

In hot forming process of the backward end-bulkhead of a pressure hull, the blank diameter and the tool clearance are the critical factors which influence wrinkling defect, forming load and shape completeness of the product. Two F.E.A softwares with the elasto-plastic material model and rigid plastic model were utilized to predict the occurrence of wrinkling defect. Tool clearance was determined by considering the increase of blank thickness, die strength and the stretching effect. Heat treatment condition after the hot forming to recover the original properties of the material was estabilished by specimen-based heat treating experiment.

• 소성∙가공
• /
• 제1권1호
• /
• pp.95-103
• /
• 1992

The plane strain analysis for simulating the stretch/draw forming operation with an arbitrarily-shaped tool profile is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The linear line elements are used for depicting the formed sheet, based on membrane approximation. The FEM formulation is tested in the sections of automotive inner panel and two-side draw-in. Not only the excellent agreement between measured and computed strains is obtained in the stretched section, but also the numerical stability of formulation is verified in the draw-in section.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.121-124
• /
• 2002

This paper resents a virtual forming system to simulate deep drawing process for stress-strain information by utilizing virtual system designed using Virtual Reality Modeling Language (VRML) and computer aided analysis (CAE) tool. The CAE tool to calculate stress, strain, and deformation is designed using Finite Element Method. Stress distributions and deformation profiles as well as the operation of forming machine can be simulated and visualized in the web. The developed system consists of three modules, input module, virtual forming machine module, and output module. The input nodule was designed using HTML and ASP. The input data for FEM calculation is directed to the forming machine module for calculation. The results from the forming machine module can be visualized through output module as well as the forming process simulation.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.550-559
• /
• 2000

One of the most important factor to be considered for the analysis of sheet metal forming processes is the tool surface description for arbitrarily- shaped sheet metal parts. In the present study , finite element approach is used to describe the arbitrarily shaped tool surface. In finite element mesh approach, tool surfaces ar, described by finite elements. The finite elements mesh description of the tool surface, which is originally described by CAD data, needs much time and time-consuming graphic operation. The method, however, has been widely used to describe a complex tool surface. In the present study, the contact searching algorithm for the finite element mesh approach is developed based on cell strategy method and sheet surface normal scheme. For the verification purpose, a clover cup drawing, Baden-Baden oilpan problem and a trunk floor drawing were investigated. The computational results based on the finite element approach were compared with the results of available parametric patch approach and experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.138-141
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planing alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.16-19
• /
• 2015

In this paper, The experimental study on the crack during press forming of the door latch assembly for a vehicle door is performed. Length to be inserted into the conventional mold upper die punch is 20 mm, wherein the cracks are generated on the product surface and causes a secondary quality problem. In this study, the length to be inserted in the mold upper die punch 0 mm, 10 mm, 20 mm, which was changed to perform the experiment. Through the experiment, the length inserted into the mold can be seen that the upper die punch of the press forming conditions optimized when the 0 mm.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.753-758
• /
• 2008

A CAM program for forming design Automated of CAM for Spring using car was developed in this study. This program was written in AUTO LISP on the AUTO CAD system with a personal. An approach to the system is based on the kinemateic of the object function. We make a determination of an cam programming. A CAM spline is continuous in displacement. velocity and acceleration. This program which can design Coil Spring shapes will successfully support CAN designing and manufacturing for Small & Medium companies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.609-610
• /
• 2010

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1585-1593
• /
• 2015

3차원 구조 알루미늄 판재(엠보싱 판재)는 표면적이 증가되어 방열효과가 뛰어나고 가공경화에 의해 굽힘강성 증가효과가 있으므로 자동차 열차단 부품에 널리 사용된다. 그러나 엠보싱 판재는 평판의 판재와 비교하면 기계적 특성이 상이하고 또한 3차원 형상으로 인해 프레스 가공에 있어서 많은 제약이 따른다. 본 연구에서는 프레스 가공공정을 대신하여 최근 신제품의 디자인 검증과 시생산에 널리 채용되고 있는 점진성형공정을 대상으로 엠보싱된 판재의 성형특성을 평가하였다. 본 연구에서 채용한 공구형상을 이용한 사각 원뿔의 점진성형 결과, 엠보싱된 판재의 경우가 평판의 경우보다 더 큰 기울기를 갖는 사각 원뿔을 파단없이 성형할 수 있음을 보였다. 이는 점진성형공정에서 CNC 공구의 이동경로(tool path)하에서 공구가 엠보싱 판재의 산과 골을 눌러 복원시키면서 재료의 소성변형을 증가시키기 때문이다. 또한 공구의 이동경로가 내향 경로보다 외향 경로인 경우가 보다 큰 기울기의 제품을 성형할 수 있지만 스프링 백의 발생으로 제품의 표면품질은 열세에 있음을 보였다.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1093-1100
• /
• 2014

The goal of this paper is to investigate preliminary the applicability of 3D printing technologies for the development of the hot bulk forming process and die. 3D printing technology based on the plastic material was applied to the preform design of the hot forging process. Plastic hot forging dies were fabricated by Polyjet process for the physical simulation of the workpiece deformation. The feasibility of application of Laser-aided Direct Metal Rapid Tooling (DMT) process to the fabrication of the hot bulk metal forming die was investigated. The SKD61 hot-working tool steel was deposited on the heat treated SKD61 using the DMT process. Fundamental characteristics of SKD 61 hot-working tool steel deposited specimen were examined via hardness and wear experiments as well as the observation of the morphology. Using the results of the examination of fundamental characteristics, the applicability of the DMT process to manufacture hot bulk forming die was discussed.