• Conservation Science in Museum
• /
• v.26
• /
• pp.119-142
• /
• 2021

The gilt-bronze-and-silver shoes, excavated from the Tomb of King Muryeong, revealed many defective parts, which constantly raised in-depth re-investigation and reporting. In that point, scientific treatment and analysis were conducted to investigate the manufacturing techniques applied. The conservation treatment was carried out with an emphasis on the restoration of the original form and joining parts. As a result, the upper part of the right shoe and some part of the back heel were joined, confirming the joining method and the number of rivet used for instep bonding. From the component analysis, it is presumed that the outer plate was gilded with mercury amalgam on pure copper, and pure silver was used for the inner plate. The main pattern of the gilt-bronze-and-silver shoes includes designs of phoenix, lotus, and six-petal flower, while the lotus pattern is high in terms of ratio. Thus, youngnaksa(twisted gilt-bronze thread), geumdongsa(gilt-bronze thread), wondujeong (rivet), and samyeonjeong(quadrangular cleats) were used for bonding each plate. Twisted gilt-bronze thread was used to join the inner and outer plates, while the center and rear of the inner plate were combined with only gilt-bronze threads. From the fact, it is presumed that the joining method was different whether the function was decoration or just bonding. Regarding the manufacturing process, traces of burnishing were confirmed on the outer surface of the gilt-bronze and silver shoes, but no burnishing traces were identified on the inner surface of the silver plate, which is likely to prove more importance put on the finishing of the outer plates rather than that of the inner.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.268-274
• /
• 2023

Image mosaicking is one of the basic and important technologies in the field of application using images. The key of image mosaicking is to extract seamlines from a joint image. The method proposed in this paper for image mosaicking is as follows. The feature points of the images to be joined are extracted and the joining form between the two images is identified. A reference position for detection the seamlines were selected according to the joint form, and an image pyramid was created for efficient image processing. The outlines of the image including buildings and roads are extracted from the overlapping area with low resolution, and the seamlines are determined by considering the components of the outlines. Based on this, the seamlines in the high-resolution image was re-searched and finally the seamline for image mosaicking was determined. In addition, in order to minimize color distortion of the image with the determined seamline, a method of improving the quality of the mosaic image by fine correction of the mosaic area was applied. It was confirmed that the quality of the seamline extraction results applying the method proposed was reasonable.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.67-69
• /
• 2004

The fuel assemblies as the nuclear fuel for the pressurized water reactor(PWR) are loaded in the reactor core throughout the residence time of three to five years. The spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the fuel assembly. The spacer grid assembly is structurally required to have enough buckling strength under various kinds of lateral load acting on the fuel assembly so as to keep the fuel assembly straight. To meet the requirement, integrity on the spacer grid welding parts should be carefully checked. In this study, welding quality of the spacer grid assembly welded by several welding companies are examined and compared.

• The Journal of Society for e-Business Studies
• /
• v.1 no.1
• /
• pp.27-50
• /
• 1996

In this paper. we present a definition of the term virtual enterprise (VE) and discuss some related terms and concepts. The definition was given based on Porter's Value Chain Theory. Then we discuss some positioning strategies for entering or joining a virtual enterprise from an executive's viewpoint. which show a framework for making decisions on for what. when and how a (real) enterprise need to participate or form a virtual enterprise and whom the partners should be. The major pert of the paper is on underlying information technologies and architectures for building virtual enterprises. Requirements for modeling virtual enterprises and core technologies needed for implementation are discussed. A virtual enterprise reference architecture based on NIIIP's model is presented. Finally we discuss some points that should. addressed from a macroeconomic and public policies viewpoints. These are the issues of IT standardization and investments in IT infrastructure.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.2
• /
• pp.77-90
• /
• 1994

Curve-net interpolation surface is one of the most popular method in engineering design. Therefore it is supported with many commercial CAD/CAM system. However, construction algorithm of curve-net interpolation surfaces is rarely opened to the public because of its copy-right. In this paper we establish a construction algorithm of curve-net interpolation surface so called sweeping surface which especially concentrates on trajectory of cross-section curve. We also show the method which can construct sweeping surfaces as NURB or Bezier mathematical models. Surfaces having the form of standard mathematical models are very useful for the application of joining, trimming, blending etc. The proposed surface interpolation scheme consists of four steps; (1) preparation of guide curves and section curves, (2) remeshing guide curves and section curves, (3) blending section curves after deformation, and (4) determination of control points for sweeping surface using gordon method. The proposed method guarantee $G^1$-continuety, and construct the surface salifying given section curves and trajectory of section curves.

• Communications of the Korean Mathematical Society
• /
• v.24 no.2
• /
• pp.291-302
• /
• 2009

Contiguous relations for hypergeometric series contain an enormous amount of hidden information. Applications of contiguous relations range from the evaluation of hypergeometric series to the derivation of summation and transformation formulas for such series. In this paper, a general formula joining three Gauss functions of the form $_2F_1$[$a_1$, $a_2$; $a_3$; z] with arbitrary integer shifts is presented. Our analysis depends on using shifted operators attached to the three parameters $a_1$, $a_2$ and $a_3$. We also, discussed the existence condition of our formula.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.190-192
• /
• 2006

The 3-dimensional(3D) chip stacking technology is one of the leading technologies to realize a high density and high performance system in package(SIP). It could be found that it is the advanced process of through-hole via formation with the minimum damaged on the Si-wafer. Laser ablation is very effective method to penetrate through hole on the Si-wafer because it has the advantage that formed under $100{\mu}m$ diameter through-hole via without using a mask. In this paper, we studied the optimum method for a formation of through-hole via using femto-second laser heat sources. Furthermore, the processing parameters of the specimens were several conditions such as power of output, pulse repetition rate as well as irradiation method and time. And also the through-hole via form could be investigated and analyzed by microscope and analyzer.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.125-127
• /
• 2006

A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly for pressurized water reactors(PWRs). The spacer grid assembly is structurally required to have enough buckling strength under various kinds of lateral loads acting on the nuclear fuel assembly so as to keep the nuclear fuel assembly straight. To meet this requirement, it is necessary to weld the welding parts carefully and precisely. In this study, weld qualities such as, weld bead size, penetration, spatter, etc. manufactured by various welders were compared and analyzed. Comparison results show that the weld qualities could be improved by selecting the optimal welding condition and also improving the welding technique.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.337-340
• /
• 2006

Aluminum extruded profiles have been mostly used only a few automotive parts until now, such as roof rail, sunroof frame and bumper beams. However, Aluminum Extru-form technology, which was recently developed by foreign advanced manufacturer, made it possible to apply the aluminum extruded profiles to suspension parts of passenger and RV cars. It could be obtained by optimized billet casting, extrusion and stretch bending technology. It was possible to have the excellent weight reduction and the competitive price comparing with conventional process of aluminum for automotive parts. Combining additional process technology such as machining and joining, the application can be extended to various automotive parts. We have developed high strength aluminum alloy and fabricated subframe and suspension arm by extruforming process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.363-366
• /
• 2001

Many joint parts by welding are found in the compression vessels, ship structures, pipings, heat exchangers, etc. Before their welding, steel plate cutting in a required form is very important. But because of the present CAD system's capability, unless otherwise expensive general CAD system is equipped, the efficiency or the accuracy of the cutting work can not be achieved easily. In order to get over this sort of problems, application-specific software that is limited on for the development view of the joint parts in those sort of facilities mentioned before was developed in this study.