• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.8
• /
• pp.727-734
• /
• 2015

Currently, polyurethane (PU) foam is used in most refrigerators as a thermal insulator, whereby the material contributes to structural stiffness by joining the refrigerator cases; however, refrigerator PU foam induces a low thermal efficiency and results in environmental contamination. To resolve these issues, we applied the vacuum insulated panel (VIP) instead of PU form in the design of a new refrigerator type, whereby the VIP significantly contributes to the rectification of the previously mentioned issues. The VIP structure, however, cannot effectively hold refrigerator cases, so the present study investigated a new frame-structure concept by evaluating the stiffness using the topology optimization of refrigerator cases. Lastly, a refrigerator prototype comprising an optimal frame structure was built and subject to a stiffness test, and a comparison of the test results with those of a conventional refrigerator show that the structural stiffness of the prototype is sufficiently effective.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.414-418
• /
• 2003

VoIP is a core technology used to transmit both voice and data in an integrated packet' form. Within this technology, SIP is the signaling protocol used for 'real time' call services; particularly those where H323 is used. Yet, when considering the needs of mobile users, it is essential we integrate VoIp within the mobile technology so the mobile host is able to receive the 'packet' transported and by, and connected to, any available internet-address. For all this to occur, we need to improve Network Delay by reducing transmission problems associated with mobile services. If we are to obtain an optimal service then we must reduce any network delays which may arise from joining Mobile IP and VoIp services. This paper, therefore, considers how, unlike previous research, these delays may be improved through the use of the signaling technology\ulcorner SIP. It also considers how this research may be introduced into current wired and wireless integrated services enabling them to use the IP 'packet'.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.212-218
• /
• 2020

Objective: Agu pigs are indigenous to the Okinawa prefecture, which is the southernmost region of Japan. Agu pigs were exposed to a genetic bottleneck during the 20th century, due to the introduction of European pig breeds. The objective of this study was to elucidate the genetic structure of Agu pigs and to determine their relationships with those of five European breeds, two Chinese breeds and Ryukyu wild boar using microsatellite markers. Methods: A total of 203 DNA samples from 8 pig breeds were used in this study. Genotyping was performed using 21 microsatellite markers distributed across 17 chromosomes. Results: Numbers of effective alleles in Agu pigs were fewer than in European breeds and Ryukyu wild boar. Among domestic pigs, Agu pigs had the lowest heterozygosity (0.423) and highest inbreeding coefficient (F_IS = 0.202), indicating a severe loss of heterozygosity in Agu pigs possibly due to inbreeding. Neighbor-joining tree analysis was performed based on Reynolds' genetic distances, which clustered Agu pigs with Duroc pigs. However, principal component analysis revealed a unique genetic position of the Agu pig, and the second principal component separated Agu pigs from all other breeds. Structure analysis with the optimal assumption of seven groups (K = 7) indicated that Agu pigs form an independent cluster from the other breeds. In addition, high and significant F_ST values (0.235 to 0.413) were identified between Agu pigs and the other breeds. Conclusion: This study revealed a substantial loss of genetic diversity among Agu pigs due to inbreeding. Our data also suggest that Agu pigs have a distinctive genetic structure, although gene flows from European breeds were observed.

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.152-160
• /
• 2010

Modern comics find their roots in caricatures, which have a basic element of comics as a combination of wrings and drawings. In three East Asian countries, new media, comics have been developed by joining modern arts and cartoons which is a news form of western comics. As modern comics have evolved according to situations of the three countries, they expand from the satire on the system, foreign invasions, and internal corruption to the enlightenment of the people. However, the criticism on the system lead to the oppression, and the imperialism in East Asian countries enforce the agitation, war engagement, propaganda of the colonialism on the comics. Current East Asian comics have been occupying the largest part in the world comics, and have their roots in the modern comics. So it is meaningful to investigate the characteristic of modern East Asian comics.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.70-70
• /
• 2010

In the present study, to estimate the mechanical properties of 800 MPa grade weld metal, welding was carried out using 800 and 600 MPa grade flux cored arc welding (FCAW) consumable and characteristics of the weld metals were investigated. The chemical composition of weld metals was investigated by an optical emission spectroscopy (OES) method. The microstructure of weld metals was analyzed by optical microscopy (OM) and secondary electron microscopy (SEM). The compositions and sizes of inclusions which are the dominant factors for the nuclei of acicular ferrite were analyzed by an transmission electron microscopy (TEM). In addition, mechanical properties of the weld metals were evaluated through tensile tests and charpy impact tests. Mostly the acicular ferrite phase which has high strength and toughness was observed. The 600 MPa grade weld metal was consisted of 75% acicular ferrite and 25% ferrite which was formed at high temperature (grain boundary ferrite, widmanstatten ferrite, polygonal ferrite). However, the 800 MPa grade weld metal was composed of about 73% acicular ferrite and 27% low temperature phase (bainite, martensite). Toughness was considerably decreased due to the increase of tensile strength (from 600 MPa to 800 MPa). The sizes of inclusions which were observed in both weld metal were $0.4{\sim}0.8\;{\mu}m$, it is effective size to form acicular ferrite.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.27-42
• /
• 2019

This paper tried a detailed approach to identify the correlation among basic elements that influenced the change of forms of the Po. To this end, the subjects were limited to the clothing from the 15th to the 18th century, which was found in the tombs of the period of Pyeonbokpo. The total number of excavated artifacts measured directly is 6 and other correctly described excavated artifacts for a total of 54 items. Per period and element, the types of collars and Seop were presented by classifying collars in 4 types, and Seop in 3 types. On the basis of the classification, the relics selected in this paper were analyzed considering the appearance, period, and rate per type of each element. The type and the change of forms of each element per period, with the focus on the appearance, were identified and the factors influencing the change of forms per element and the correlation between such factors were investigated. The representative type in the first period included dual collars, dual Seop and the representative type in the second period was characterized by a shawl collar and a dual Seop joining the pieces. The representative type in the third period was characterized by round collars and a short Seop. The elements determining the forms of Po, including collars and Seop, had a correlation to the lapse of time and had been systematically influencing each other. Furthermore, the overall change of form was caused due to the social functions as well as the supplementary function of keeping balance among the elements and accordingly, the change of forms was think characterized per period.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.713-718
• /
• 2011

The advancement of computer network technology, coupled with the growing prevalence of Internet, is promoting ubiquitous computing, also called next-generation computing paradigm, as an important study field that many researches are joining and undergoing. In this paper, as the support technology for creating ubiquitous computer environment, we design the SSDLbased on XMLwhich is used for sending and receiving data by USN application service in a standardized form. A ref model, with no regard to different platforms or implementation languages, is proposed in our research on the basis of web service so that most of unspecified users could apply the standardized protocol designed for sensor data to real sensor data in various application environments based on the designed language. Therefore, through this research we can take advantage of acquisition of USN-based technology and technology draft related to application service.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.58-66
• /
• 2013

PURPOSE. The purpose of this study was to decide the most appropriate point on tragus to be used as a reference point at time of marking ala tragus line while establishing occlusal plane. MATERIALS AND METHODS. The data was collected in two groups of subjects: 1) Dentulous 2) Edentulous group having sample size of 30 for each group with equal gender distribution (15 males, 15 females each). Downs analysis was used for base value. Lateral cephalographs were taken for all selected subjects. Three points were marked on tragus as Superior (S), Middle (M), and Inferior (I) and were joined with ala (A) of the nose to form ala-tragus lines. The angle formed by each line (SA plane, MA plane, IA plane) with Frankfort Horizontal (FH) plane was measured by using custom made device and modified protractor in all dentulous and edentulous subjects. Also, in dentulous subjects angle between Frankfort Horizontal plane and natural occlusal plane was measured. The measurements obtained were subjected to the following statistical tests; descriptive analysis, Student's unpaired t-test and Pearson's correlation coefficient. RESULTS. The results demonstrated, the mean angle COO (cant of occlusal plane) as $9.76^{\circ}$, inferior point on tragus had given the mean angular value of IFH [Angle between IA plane (plane formed by joining inferior point-I on tragus and ala of nose- A) and FH plane) as $10.40^{\circ}$ and $10.56^{\circ}$ in dentulous and edentulous subjects respectively which was the closest value to the angle COO and was comparable with the values of angle COO value in Downs analysis. Angulations of ala-tragus line marked from inferior point with occlusal plane in dentulous subject had given the smallest value $2.46^{\circ}$ which showed that this ala-tragus line was nearly parallel to occlusal plane. CONCLUSION. The inferior point marked on tragus is the most appropriate point for marking ala-tragus line.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.21-32
• /
• 2007

The linear traffic model(Vertical queueing model) that is adopted widely in traffic flow estimation assumes that all vehicles have the identical motion before joining a queue at the stop-line. Thus, a queue is supposed to form vertically not horizontally. Due to the simplicity of this model, the departure time of the leading vehicle is assumed to coincide with the start of effective green time. Thus, the delay estimates given by the Vertical queueing model is not always realistic. This paper explores a microscopic traffic model(a Kinematic Car-following model at Signalised intersections: a KCS traffic model) based on the one dimensional Kinematic equations in physics. A comparative evaluation in delay and sensitivity of delay difference between the KCS traffic model and the previously known Vertical queueing model is presented. The results show that the delay estimate in the Vertical queueing model is always greater than or equal to the KCS traffic model; however, the sensitivity of delay in the KCS traffic model is greater than the Vertical queueing model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1329-1337
• /
• 2008

The project of Education information is promoted to maximize the efficiency of Teaching-Learning at schools. So Ministry of Education & Human Resources Development develops and spreads the Computer Assisted Instruction(CAI) and outstanding Educational Software to help learners who can utilize this software and make learning environment to form their own recognition. As the number of this software is increased, the necessity of management of Educational Software is required. This study divides Educational Software into three kinds, teaching-learning software, business management software, and system management software, and suggests how to use these softwares effectively according to this division. After the users log into the system through joining members, they are divided into manager module, teachers module, and students module. The manager manages all software like registration, revision, reference of date and so on. The teacher accesses properly. The student accesses teaching-learning software and prepares and reviews his lessons at any time.