• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.63-77
• /
• 2015

Improve the rural views of the Government and the municipalities with the intention of rural landscape planning. However, rural scenery evaluation of landscape types and element categories, landscape scenes, such as the valuation of resources selected, form a coherent system and ecological point of view is not only a Visual perspective of evaluation, or evaluation is made. This study evaluates the rural landscape through the rural landscape for rurality is implemented can explain the image. Rural amenity 100 represented the rural landscape in rurality with photos of photos, and scenes, photos, location-based rural Vista rurality landscapes drawn components. Selected landscape photography scenic landscapes in the u.s. survey and image vocabularies through surveys is representative of the landscape in rurality of each Vista location-specific photos and images began extracted factors. As a result, the Distant view is a town and village in the rolling hills of the surrounding environment is an image behind the Vista Skyline, Farmland Rural village forests, Behind the hills, Individual housing roof, Housing arrangement, The number of household includes landscape components. Factor analysis 'openness', 'intimacy', 'activity', 'complexity', 'safety' was down to five factors, such as a description of the overall factors that force was 66.45 percent. Middle distance view is close to being out of town houses and village environment, an image in the skyline hills Vista, farmlands, village forests, rolling hills, behind the scenes of the housing component of the neck, the sperm will honor an individual factor analysis results are 'intimacy', 'safety', 'openness', 'specificity', 'complexity' five factors the whole description of the capacity factors compared to 67.24 percent. Close-range view is mainly in Vista village embraced the individual elements and an image of a harmonious location in the surroundings of the sperm, individual houses, fences, gates, courtyard, Garden, garage, agricultural facilities, including, but not limited to, factors assay but an 'intimacy', 'complexity', 'safety', 'activity', 'openness' five factors, such as a description of the overall factors that force was 65.29%. This research seeks to determine the extent to which rurality of rural landscape Vista by location attributes and elements and representative officer in photo selection and rurality to extract the image. To date, followed by a comprehensive study, which was presented through the readjustment could not overlook the Visual elements. The future rural development officer for the evaluation of rural landscape classification and quantitative and objective assessment will have to come up with ways to do.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.51-59
• /
• 2006

The study is diagnosis about fatigue failure phenomenon of heating coil spring (sup9) and heat treatment method that is used to crusher. Because more than 80~90% of damage announcement of breakdown of machine and construction is been caused in fatigue present state, fatigue failure became important leading person at design. Calculated design load is imposed repeatedly that fatigue breakdown is safe. Is phenomenon that change load is imposed in the construction continuously. Used coil spring applies heat 30minute by Quenching temperature $860^{\circ}C$ if see manufacturing process and temperature of gasoline of $50^{\circ}C$ keep after quench that know tempering a $460^{\circ}C$ 90minute a product be. If doto apply heat $950^{\circ}C$ material at rolling process historically before quenching, austenite formation clay pipe being done AGS(Austenite Grain Size) by 2.5~4 become. Apply heat quenching 30minute by $820^{\circ}C$ by improvement method and after quench that keep $50^{\circ}C$ in oil tempering if do $450^{\circ}C$, 90minute spring ideal formation sorbite formation of the river form and condition that satisfy most more than AGS 7 appeared. Also, we can secure authoritativeness through MT since shot peening processing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1043-1048
• /
• 2014

As micro screws feature reduced screw lengths and pitches, the resulting clamping force diminishes because of the reduced length of the actual joints. The elements of the clamping force are material, geometry, and friction. We studied the shrinking size of the screw and the methods to improve the clamping force by changing the material. We developed a micro screw using SWCH18A and SUS XM7 materials, and obtained the precision and thickness of the pitch through three-dimensional measurement. We also measured the external resistance of the micro screw by applying the Vicker's hardness test and conducted a break surface analysis using a break torque test and SEM for obtaining the break characteristics.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.483-491
• /
• 2001

The recovery and recrystallization behavior of cold-rolled Zr-based alloys during isothermal annealing at temperatures from $575^{\circ}C$ to $650^{\circ}C$ was studied by thermoelectric power and Vickers microhardness measurement. The recovery and recrystallization resulted in the increase of TEP doe to the extinction of lattice defect, vacancy, dislocation and stacking fault during isothermal annealing after cold- rolling. The completion of recrystallization could be determined much clearly by TEP behavior than by microhardness change in Zr-based alloys. Especially, the recovery and recrystallization were classified separately by TEP behavior in Zr-0.4Nb-xSn alloys. From the analysis of TEP behavior and microhardness, the addition of Sn caused to form the interaction between stain field and dislocation, which resulted in the delay of recovery in Zr-based alloys. The precipitation due the addition of Nb suppressed the grain growth after recrystallization effectively in Zr-based alloys.

• Biomedical Science Letters
• /
• v.24 no.4
• /
• pp.372-379
• /
• 2018

Korean society is experiencing rapid growth due to industrialization and urbanization, and the aging of population is emerging. Degradation of the masticatory muscle due to aging and reduction of the number of mastications causes dry mouth syndrome with decreased saliva in the elderly. Changes in the amount and composition of saliva cause various oral diseases, especially, periodontal disease is closely related to the microorganisms that form the plaque. In the elderly education, stimulation saliva was collected at the first visit and the last visit to observe changes in microorganisms in the oral cavity. For the collection of the probes, the paraffin wax was chewed for 5 minutes. The samples were immediately refrigerated in a 50 cc plastic tube and then stored at $-20^{\circ}C$ until the next use. The subjects of this study were the elderly people aged 65 years or older, and the study was conducted on 16 persons, 3 males and 13 females. The distribution of saliva microorganisms according to rolling brushing method showed significant difference in all three groups (Aa & Red complex, Orange complex and Green complex) before and after the education. In the group who answered that they had dentures, it was confirmed that the amount of microorganisms before and after education was significantly reduced in all three groups. There was a significant decrease in the amount of microorganisms in the Aa & Red complex and Orange complex group in the case of hypertension related to systemic disease. In conclusion, the higher the interest of oral health and general health of the subjects, the more effective the education.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.3
• /
• pp.134-140
• /
• 2019

Objective: The purpose of this study was to investigate the effect of exercise therapy and bedside ergometer exercise on muscle strength, function level, and quality of life of persons in intensive care. Design: Randomized Controlled Trial Methods: Sixteen patients in the ICU were randomly assigned to either the exercise group (n=8) or the bedside cycle ergometer group (n=8). Activities in the ICU exercise group (rolling, sitting at the edge of the bed, transfer from sitting to standing, standing balance training, ambulation) and bedside cycle ergometer group were performed 5 times a week for 30 minutes during the ICU admission period. Medical Research Council (MRC) and Functional Status Scale-Intensive Care Unit (FSS-ICU) parameters were assessed at the time of admission to the ICU, and reevaluation was assessed on the day of ICU discharge. The Short Form-36 (SF-36) was assessed at the time of discharge from the ICU. Results: MRC and FSS-ICU were significantly increased before and after intervention in both the experimental and control groups (p<0.05). There was a significant difference between MRC and FSS-ICU in the comparison of the changes before and after the intervention (p<0.05). SF-36 was compared between groups after intervention and there was a significant difference between the experimental and the control group (p<0.05). Conclusions: Muscle strength and functional levels improved after intervention in both the experimental and control groups. The ICU exercise group was more effective than the bedside cycle ergometer group to improve muscle strength, functional level, and quality of life performance of persons in the ICU.

• Korean Journal of Metals and Materials
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2008

This study is concerned with effects of complex oxides on Charpy impact toughness of heat affected zone (HAZ) of API X80 linepipe steels. Three kinds of steels were fabricated by varying alloying elements such as Ti, Al, and Mg and hot-rolling conditions to form complex oxides, and their microstructures and Charpy impact properties were investigated. The number of complex oxides present in the steel containing excess Ti, Al, and Mg was twice larger than that in the conventional steels, while their size ranged from 1 to $3{\mu}m$ in the three steels. After the HAZ simulation test, the steel containing a number of oxides contained about 20 vol.% of acicular ferrite in the simulated HAZ, together with bainitic ferrite and martensite, whereas the HAZ microstructure of the conventional steels consisted of bainitic ferrite and martensite with a small amount of acicular ferrite. This formation of acicular ferrite in the oxide-containing steel was associated with the nucleation of acicular ferrite at complex oxides, thereby leading to the great (five times or more) improvement of Charpy impact toughness over the conventional steels.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.2
• /
• pp.66-74
• /
• 2021

Cladding material, which can selectively obtain excellent properties of different metals, is a composite material that combines two or more types of dissimilar metals into one plate. The titanium-copper cladding material between titanium which has excellent corrosion resistance and copper which has high thermal and electrical conductivity, are highly valuable composite materials. It can be used as heat exchangers with high conductivity under severe corrosion conditions. In order to apply the clad plate to the heat exchanger, it must be manufactured in the form of a tube and additional welding is required. It is important to select the cladding material manufacturing process and the welding process. The process of manufacturing the cladding material includes extrusion, rolling, and explosive bonding. Among them, the explosive bonding process is suitable for additional welding because no heat-affected zone is formed. In this study TIG welding of the explosive-bonded dissimilar clad plates was successfully performed by butt welding. The microstructures and bonding interface of the welded part were observed, and the effect of the bonding layer at the welding interface and the intermetallic compounds on the mechanical properties and tensile plastic deformation behaviors were analyzed. And also the integrity of TIG-welded dissimilar part was evaluated.

• Composites Research
• /
• v.34 no.6
• /
• pp.350-356
• /
• 2021

When a ship with a planing line operates or turns in a straight line, the floating position and trim change according to the speed, and a large resistance is generated on the hull. In this paper, the resistance to a planing line was estimated through the computational fluid dynamics of a leisure boat with improved hull weight and durability by applying a carbon composite material to the hull. The resistance performance of the bow and stern of the 18ft class leisure boat was checked and the flow field of the entire vessel was estimated, and the stability of the planing line was confirmed by comparing the resistance of each trim through numerical analysis. In addition, it was confirmed that the designed planing line could withstand it sufficiently because the force applied to the hull was not large, and The stability of the boat was analyzed by calculating the wavelength of the wave and the length of the ship as the ratio of gravity to the inertial force and checking how much force the rolling occurred.

• Journal of Life Science
• /
• v.34 no.2
• /
• pp.86-93
• /
• 2024

Since replication of plasmids must be strictly controlled, plasmids that generally perform rolling circle replication generally maintain a constant copy number by strictly controlling the replication initiator Rep at the transcriptional and translational levels. Plasmid pJB01 contains three orfs (copA, repB, repC or repABC) consisting of a single operon. From analysis of amino acid sequence, pJB01 CopA was homologous to the Cops, as a copy number control protein, of other plasmids. When compared with a CopG of pMV158, CopA seems to form the RHH (ribbon-helix-helix) known as a motif of generalized repressor of plasmids. The result of gel mobility shift assay (EMSA) revealed that the purified fusion CopA protein binds to the operator region of the repABC operon. To examine the functional role of CopA on transcriptional level, 3 point mutants were constructed in coding frame of copA such as CopA R16M, K26R and E50V. The repABC mRNA levels of CopA R16M, K26R and E50V mutants increased 1.84, 1.78 and 2.86 folds more than that of CopA wt, respectively. Furthermore, copy numbers owing to mutations in three copA genes also increased 1.86, 1.68 and 2.89 folds more than that of copA wt, respectively. These results suggest that CopA is the transcriptional repressor, and lowers the copy number of pJB01 by reducing repABC mRNA and then RepB, as a replication initiator.