• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.95-104
• /
• 2019

In this paper, we propose a method to design a generalized sinusoidal frequency modulated(GSFM) pulse that is robust to reverberation environment. GSFM pulses are a generalized form of SFM(Sinusoidal frequency modulated) pulses, which have the advantage of having a thumbtack ambiguity function with excellent range and Doppler resolution. However, the periodicity disappears during the generalization process, therefore, the detection performance is reduced in reverberation environment compared to SFM pulse with comb spectrum. In this paper, the trade-off relationship between the reverberation suppression performance of the SFM pulse and the range resolution performance of the GSFM pulse is analyzed by appropriately changing the parameter ${\rho}$ of the GSFM pulse. In order to verify the performance of the proposed GSFM pulse, the simulation was performed and it was confirmed that the proposed GSFM pulse has excellent distance resolution while detecting the slow Doppler target.

• Nuclear Engineering and Technology
• /
• v.14 no.2
• /
• pp.78-85
• /
• 1982

The steady-state rotation of plasma centrifuge is theoretically analyzed to understand the physics of rotating plasmas and its feasibility for isotope separation. The centrifuge system under consideration consists of an annular gap between coaxial cylindrical anode and cathode in the presence of an externally-applied axial magnetic field. A problem for coupled partial differential equations describing centrifuge fields is formulated on the basis of the magnetohydrodynamic equations. Two-dimensional solutions are found analytically in the form of Fourier-Bessel series. The current density and velocity distributions are discussed in terms of the Hartmann number and the geometrical parameter of the system. At typical conditions, rotational speeds of the plasma up to the order of 10$^4$m/sec are achievable, and increase either with increasing Hartmann number, or with increasing ratio of the axial length to the inner radius of the cylinder. In view of much higher speeds of rotation which can be achieved in plasma centrifuge, it is expected that its efficiency is superior to mechanically driven gas centrifuges.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.185-192
• /
• 2011

BNR process is an effective method to remove high strength nitrogen included in wastewater and piggery wastewater. There have been many former studies about the induction of nitritation which have many advantages than full nitrification and the impacting factors on nitritation. Especially, it is reported that organic matter has a relation with nitritation. In this study, laboratory sacle reactor was operated using effluent of anaerobic digester, piggery wastewater and anaerobic digester effluent of piggery wastewater. After analyzing the operating results, the impact of organic matter on nitritation was analyzed by classified COD fractions. It was showed that nitritation is affected by organic matter especially by Ss. In conclusion, organic matter should be managed not just as a single gross parameter but in a classified form.

• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.627-635
• /
• 2019

In order to study the axial compression performance of sand-lightweight concrete-filled steel tube (SLCFST) stub columns, three circular SLCFST (C-SLCFST) stub column specimens and three SLCFST square (S-SLCFST) stub column specimens were fabricated and static monotonic axial compression performance testing was carried out, using the volume ratio between river sand and ceramic sand in sand-lightweight concrete (SLC) as a varying parameter. The stress process and failure mode of the specimens were observed, stress-strain curves were obtained and analysed for the specimens, and the ultimate bearing capacity of SLCFST stub column specimens was calculated based on unified strength theory, limit equilibrium theory and superposition theory. The results show that the outer steel tubes of SLCFST stub columns buckled outward, core SLC was crushed, and the damage to the upper parts of the S-SLCFST stub columns was more serious than for C-SLCFST stub columns. Three stages can be identified in the stress-strain curves of SLCFST stub columns: an elastic stage, an elastic-plastic stage and a plastic stage. It is suggested that AIJ-1997, CECS 159:2004 or AIJ-1997, based on superposition theory, can be used to design the ultimate bearing capacity under axial compression for C-SLCFST and S-SLCFST stub columns; for varying replacement ratios of natural river sand, the calculated stress-strain curves for SLCFST stub columns under axial compression show good fitting to the test measure curves.

• Translational and Clinical Pharmacology
• /
• v.26 no.4
• /
• pp.166-171
• /
• 2018

Although there are many commercially available training software programs for pharmacokinetics, they lack flexibility and convenience. In this study, we develop simulation software to facilitate pharmacokinetics education. General formulas for time courses of drug concentrations after single and multiple dosing were used to build source code that allows users to simulate situations tailored to their learning objectives. A mathematical relationship for a 1-compartment model was implemented in the form of differential equations. The concept of population pharmacokinetics was also taken into consideration for further applications. The source code was written using R. For the convenience of users, two types of software were developed: a web-based simulator and a standalone-type application. The application was built in the JAVA language. We used the JAVA/R Interface library and the 'eval()' method from JAVA for the R/JAVA interface. The final product has an input window that includes fields for parameter values, dosing regimen, and population pharmacokinetics options. When a simulation is performed, the resulting drug concentration time course is shown in the output window. The simulation results are obtained within 1 minute even if the population pharmacokinetics option is selected and many parameters are considered, and the user can therefore quickly learn a variety of situations. Such software is an excellent candidate for development as an open tool intended for wide use in Korea. Pharmacokinetics experts will be able to use this tool to teach various audiences, including undergraduates.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.35-39
• /
• 2019

To date, porous alumina structures have been implemented by electrochemical anodization technique. The anodizing methods can easy to make a porous aluminum oxide film with a regular arrangement, but oxide film with complex structure type such as pillar-on-pore is relatively difficult to implement. Therefore, this study aims to observe the change of anodized oxide pore size, thickness, and structure in a phosphoric acid solution according to applied anodization voltage conditions. For the implementation of hybrid composite oxide structures, it is possible to create by modulating anodization voltage. The experimental conditions were performed at the applied anodization voltage of 100 V and 120 V in 10% phosphoric acid solution, respectively. The experimental results were able to observe the structure of oxides in the form of porous and composite structures (pillar-on-pore), depending on each condition.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3051-3057
• /
• 2021

The concrete is considered as an important radiation shielding material employed widely in nuclear reactors, particle accelerators, laboratory hot cells and other different radiation sources. The present research is dedicated to the shielding properties study of the ordinary concrete reinforced with different weight fractions of lead oxide micro/nano particles. Lead oxide particles were fabricated by chemical synthesis method and their properties including the average size, morphological structure, functional groups and thermal properties were characterized by XRD, FESEM-EDS, FTIR and TGA analysis. The gamma ray mass attenuation coefficient of concrete composites has been calculated and measured by means of the Monte Carlo simulation and experimental methods. The simulation process was based on the use of MCNP Monte Carlo code where the mass attenuation coefficient (μ/ρ) has been calculated as a function of different particle sizes and filler weight fractions. The simulation results showed that the employment of the lead oxide filler particles enhances the mass attenuation coefficient of the ordinary concrete, drastically. On the other hand, there are approximately no differences between micro and nano sized particles. The mass attenuation coefficient was increased by increasing the weight fraction of nanoparticles. However, a semi-saturation effect was observed at concentrations more than 10 wt%. The experimental process was based on the fabrication of concrete slabs filled by different weight fractions of nano lead oxide particles. The mass attenuation coefficients of these slabs were determined at different gamma ray energies using ²²Na, ¹³⁷Cs and ⁶⁰Co sources and NaI (Tl) scintillation detector. The experimental results showed that the HVL parameter of the ordinary concrete reinforced with 5 wt% of nano PbO particles was reduced by 64% at 511 keV and 48% at 1332 keV. Reasonable agreement was obtained between simulation and experimental results and showed that the employment of nano PbO particles is more efficient at low gamma energies up to 1Mev. The proposed concrete is less toxic and could be prepared in block form instead of toxic lead blocks.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.630-634
• /
• 2020

We developed a processing recipe to synthesize flexible polyurethane foam with a pore size of 335 ± 107 ㎛. The gelling reaction time was varied from 0 to 30 minutes and the physical properties of the foam were evaluated. The gelling reaction where the polypropylene glycol and tolylene 2,4-diisocyanate (TDI) were reacted to form urethane prepolymer, proceeded until a chemical blowing agent, deionized water, was introduced. Fourier transform infrared (FT-IR) spectra showed that the composition of the foam did not change but the foam height reached a peak value when the gelling reaction time was 10 minutes. We found that increasing the gelling time lessened the coalescence and helped the formation of cells. Lastly, the repeatability of polyurethane foam was confirmed by one-way analysis of variance (ANOVA) by synthesizing ten identical polyurethane foams under the same experimental conditions, including the gelling reaction time. Overall, the new time parameter in-between the gelling and blowing reactions will give extra stability in manufacturing identical polyurethane foams and can be applied to various polyurethane foam processes.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.1
• /
• pp.139-146
• /
• 2003

In this paper we demonstrate a cryptanalysis of the stream cipher LILI-128. Our approach to analysis on LILI-128 is to solve an overdefined system of multivariate equations. The LILI-128 keystream generato $r^{[8]}$ is a LFSR-based synchronous stream cipher with 128 bit key. This cipher consists of two parts, “CLOCK CONTROL”, pan and “DATA GENERATION”, part. We focus on the “DATA GENERATION”part. This part uses the function $f_d$. that satisfies the third order of correlation immunity, high nonlinearity and balancedness. But, this function does not have highly nonlinear order(i.e. high degree in its algebraic normal form). We use this property of the function $f_d$. We reduced the problem of recovering the secret key of LILI-128 to the problem of solving a largely overdefined system of multivariate equations of degree K=6. In our best version of the XL-based cryptanalysis we have the parameter D=7. Our fastest cryptanalysis of LILI-128 requires $2^{110.7}$ CPU clocks. This complexity can be achieved using only $2^{26.3}$ keystream bits.

• The Korean Journal of Franchise Management
• /
• v.11 no.4
• /
• pp.17-29
• /
• 2020

Purpose: As the untact culture has spread due to the recent COVID-19, the service industry as well as the beauty salon is shrinking. In order to overcome such a crisis in beauty salons, the lower dimension of beauty salon service quality is divided into servicescape, technical service, and employee service, and actions are taken with the 'perceived value of the customer' as a parameter. In this study, S-O-R(Stimulus-Organism-Response) theory was applied for customer-centered analysis, and gender and regularity were selected as moderator variables to add practical implications. Research design, data, and methodology: All constructs were measured using items developed and used in the previous study. A total of 261 questionnaires were collected online using NaverForm. The data were analyzed using factor analysis, correlation analysis, and measurement model analysis with SPSS 22.0 and AMOS 22.0. After testing the research model and hypothesis for the entire group, a multi-group analysis was conducted by dividing into male and female groups, regular customers, and non-regular customers. Results: First, this study showed that the service environment of beauty salon customers had a negative (-) effect on perceived utilitarian value, and the technical service and perceived hedonic value had a positive (+) effect on the customer's behavioral intention. Technical service and employee service had a positive (+) effect on perceived hedonic value, but perceived hedonic value did not affect customer's behavioral intention. Second, there is no statistically significant difference in each path between male and female groups. Third, there was a statistically significant difference between regular customers and non-regular customers, only the path that the servicescape influences the perceived hedonic value. Conclusion: According to the results of this study, technical service and utilitarian value should be considered in order to induce behavioral intention of customers, and technical service quality should be considered first. Also, operating a beauty salon requires a differentiated approach to the salon servicescape according to the ratio of non-regular and regular customers. The beauty salon servicescape generally showed negative practical value for non-regular customers, but positive for the Hedinic value for servicescape such as comfortable service and clean interior for regular customers.