• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1543-1545
• /
• 2012

Breast cancer accounts for about 26% of all newly diagnosed cancers in women aged 20 to 59 years. As part of a basic program for cancer control, the present cross sectional descriptive study was conducted with the objective of determining the epidemiology of breast cancer in Ardabil province during 2003-2010. Necessary information on 469 recorded cases of breast cancer in the registry were collected by check list from patient's files and then analyzed by statistical methods with SPSS.16 software. Some 455 of the patients (97%) were female, 329 (70.1%) residing in Ardabil. The mean age was $46.8{\pm}13.6$ and most were in the age group of 40 - 60. The most prevalent pathologic form was infiltrative ductal carcinoma with 316 cases (67.4%), the largest proportion being grade II (30.6%), but very many belonged to grades III and IV (40.5%). Breast cancer in Ardabil province appeared to slightly increase over the period studied. The results were similar to other places in Asia. With regard to this, more widespread studies are required to determine factors influencing the prevalence at low age and also how to promote early detection.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.43-46
• /
• 2008

Quad-Rotor, which consists of four blades, performs a flight task by controling each rotation speed of the four blades. Quad-Rotor blade making no use of cyclic pitch or collective one is a type of fixed-wing as different from helicopter blade. Although, Quad-Rotor is simple and easy to control for those reasons, blade configuration of the fixed wing is one of the critical factors in determining the performance of Quad-Rotor. In the present study, coefficients for thrust and power of Quad-Rotor blade were derived from the data acquired by using 6-component balances. Firstly, Measurements for aerodynamic force were conducted at various pitch angles (i.e., from 0$^{\circ}$ to 90$^{\circ}$ with the interval of 10$^{\circ}$). The blade used in this experiment has aspect ratio of 6 and chord length of 35.5 mm. Secondly, assembled-blade, which was an integral blade but divided into many pieces, was used in order to test aerodynamic forces along twist angles. The curve of thrust coefficient along pitch angle indicates a parabola form. Stall which occurs during wind tunnel test to calculate lift coefficient of airfoil does not generate. When deciding the blade twist angle, structural stability of blade should be considered together with coefficients of thrust and power. Those aerodynamic force data based on experimental study will be provided as a firm basis for the design of brand-new Quad-Rotor blade.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3281-3288
• /
• 2013

Background: Breast cancer is the leading cause of cancer-related deaths in women. Despite being associated with high morbidity and mortality, breast cancer is a disease that can be diagnosed and treated early. Materials and Methods: In this cross-sectional study of 321 women, data were collected by Questionnaire, Breast Cancer Risk Assessment Form and Champion's Health Belief Model Scale. Mann-Whitney U, Kruskal-Wallis, Chisquared tests and logistic regression were used in the statistical analysis. Results: It was found that only 2.2% of women have high and very high risk levels of breast cancer risk. There is a positive correlation between early diagnosis techniques and Health Belief Model Sub-Dimension scores which are sensibility, health motivation, BSE (Breast self-examination) self-efficient perception and negative correlation between mammography barrier score and BSE barrier score (p 0.05). When factors for not having BSE were examined, it was determined that the women who do not have information about breast cancer and the women who smoke have a higher risk of not having BSE. Conclusions: It is important to determine health beliefs and breast cancer risk levels of women to increase the frequency of early diagnosis. Women's health beliefs are thought to be a good guide for planning health education programs for nurses working in this area.

• Language and Information
• /
• v.5 no.2
• /
• pp.39-55
• /
• 2001

This paper investigates the idiosyncratic understanding of universal quantifiers such as every, each or all by young children at the ages of 4 to 7, and argues that the phenomenon is explicable in terms of the maturation of both the cognitive system and the linguistic system. Evidence for this dual explanation comes from the fact that the visual input, a picture, plays a key role in determining the children's conceptual representation, suggesting the need for the central integration of visual and linguistic elements; and from the fact that a quantifier in the linguistic input has an intrinsic property, i.e. a <+focus> feature. I have tried to explain the nature of the cognitive factors in terms of the function of the central system, suggesting a modified form of Smith & Tsimpli's (1995) yersion of Fodor's (1983) modularity hypothesis. The categorial status of the quantifier in the children's interpretation is considered, focusing on the movement of that quantifier out of its own extended projection to FP. It is claimed that children initially treat quantifiers as modifiers, rather than functional heads, and that the phenomenon of quantifier spreading by children can be attributed to delay in the development of the relevant functional category, i.e., DP (or QP), in language acquisition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.184-192
• /
• 1998

This paper deals with an extended analytical solution for the mixture solidification problem, in which temperature is inherently coupled with the solute transport due to the presence of volume contraction induced flow. A new exact solution to the energy equation accounting for the convection effect in the melt is successfully derived, which allows the present analysis to cover a high initial superheating. Difference in properties between the solid and liquid phases is rigorously incorporated into the model equations in the solid fraction weighted form. Taking advantage of linearized correction factors, a systematic and easy-to-implement algorithm for determining the solidus and liquidus positions is introduced, which proves not only to converge stably but also to be very efficient. For a specific case, the present results show excellent agreements with the existing solution. The effect of convection in the melt becomes appreciable with increasing the initial superheating. It is revealed that variable properties in the mushy region significantly affect the solidification behaviors. The present study is also capable of resolving the interaction between microsegregation and macrosegregation.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.87-95
• /
• 1998

Cracking is considered to be one of the important factors in determining the durability of reinforced concrete structures. When the bending stress exceeds the modulus of rupture of the concrete, cracking form along the length of members. The total load is transferred across these cracks by the reinforcement, but the concrete between cracks is still capable of carrying stresses due to the bond between steel and concrete. This phenomenon is called the tension stiffening effect. The tension stiffening effect is affected by many variables, such as the bond stress, strength of concrete, interrocking of aggregate, type of steel, and dowel action of steel. Also, this tension stiffening effect is usually quite significant in beams under service loading, and must be taken into account in the calculation of deflection and crack widths. In this study, the experiment was carried out on types of specimen, strength of concrete, and steel ratio and finite element analysis were compared in terms of load-deflection relationship, crack pattern.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.32-40
• /
• 2004

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and the die design modules consider several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi former, and the availability of standard parts. They can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module an optimal design technique and horizontal split die were investigated for determining appropriate dimensions of components of multi-former die set. It is constructed that the proposed method can be beneficial for improving the tool life of die set at practice.

• International Journal of Contents
• /
• v.18 no.2
• /
• pp.32-46
• /
• 2022

In recent years, large-scale and high-density use of LED on facades has exposed some disadvantages, such as light pollution, high energy consumption, unsustainability, and poor interactivity. Because of the development of smartphones and augmented reality (AR), AR has emerged as a new technology available to users to interact with the media façade. As an augmented reality app for public space, the AR map app can superimpose virtual images on the surface of a building to form an AR media façade, which can be applied in the fields of navigation, advertising, interactive public art, smart retail, etc. This study establishes the variables influencing usage intention and the consequent outcomes of Huawei AR map app and uses the technology acceptance model (TAM) to discuss their relationship. Results show that consumer innovativeness, information quality, and design quality have a strong influence on perceived ease of use. Information quality has a positive impact on perceived usefulness, but design quality has a weak influence. Also, the design quality of Huawei AR map app and consumer innovativeness have a higher effect on perceived enjoyment than information quality. Users' usage attitude and perceived usefulness when using Huawei AR map app are key factors determining their usage intention. This study inspires city planners, architects, developers, and designers of AR apps that augmented reality can partly replace media façade, and that investment in augmented reality will achieve significant sustainable economic and social benefits.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.24-35
• /
• 2022

The purpose of this study was to form a linked model in which local institutions related to lifelong education for the disabled can cooperate based on the Daegu University K-PACE Center. The contents of the study started with recognizing the problem that the adult-centered lifelong education support system does not effectively cope with these factors, even though the independent life of people with developmental disabilities is a major factor determining the quality of life. Regarding this problem recognition, this study primarily emphasized the view that educational support for independent life of people with developmental disabilities should establish the context of the school foundation. The context of the school foundation is established for lifelong education centered on adulthood for people with developmental disabilities because the curriculum is embodied through the standards of subject matter education. In this regard, the Daegu University K-PACE Center, which established a curriculum that supports the independent life of people with developmental disabilities in terms of linking higher and lifelong education, actually reflects the context of the school foundation. As a result, this study prepared a strategy that could be considered as a transition to advance the curriculum organized by the Daegu University K-PACE Center, and the strategy was secondarily reflected as a procedure that could be linked to local lifelong education-related institutions for the disabled. Finally, this study presented a form of transition in which people with developmental disabilities can access the curriculum of lifelong education through the connection of local lifelong education-related institutions for the disabled, centering on the entire life of adulthood.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.4
• /
• pp.135-146
• /
• 2018

A Visual landscape planning and management system has been introduced and implemented by each ministry so as to solve the problems of visual landscape destruction due to recognition on the value of natural landscape of beautiful territory and various development projects. At present, this system emphasizes the importance of the visual and perceptual aspect of the landscape however, there is a lack of techniques required for comprehensively predicting, evaluating, and managing it. Furthermore, sustainable landscape management after the completion of development projects has been inadequately carried out, as the focus has been only on consultation in the planning process of the development project in institutional performance. To this end, we presented objective and standardized criteria to predict and judge the effects of development projects on landscapes before project implementation. During the implementation of the development project, the influence of the visual landscape becomes accumulated in the construction progress stage. There is a need to identify the main viewpoints and to examine the continuous changes in the landscape-influencing factors, owing to the remarkable influences on the landscape, such as the change in the topography and the change caused by the artificial structure. During the stage of managing the influence on the visual landscape after the completion of the project, the influence on landscape should be monitored by measuring the change in the continuous landscape-influencing factors and determining the extent to which the actual reduction plan has been implemented. These processes should be performed continuously to maintain the quality of the visual landscape. The change in the landscape caused by the development project is shown to cause relatively greater visual damage than other factors composing the landscape owing to the influence of the artificial factors including the structure or the building. This shows that not only detailed examination of the visual impact before the development project but also continuous management is required during and after the development project. For this purpose, we derived eight landscape-influencing factors including form/shape, line, color, texture, scale/volume, height, skyline, and landscape control point. The proposed considering to be of high utilization in that it has a clear target of the landscape influencing factors.