• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.2
• /
• pp.136-143
• /
• 1999

This study was conducted to evaluate the degradation characteristics of waste cigarette filters under 0, 5, 10, and 15cm in depth from soil surface by environmental conditions. Weather was the most important factor during degradation of waste cigarette filters in this study. Bulking of cellulose acetate filaments exposed on soil surface was observed after 2 months, but the form of filter was kept up after 12 months. The treated cigarette filters in soil landfill revealed a little different degradation pattern at each soil landfill depth, The sample in 5cm depth of soil was more degraded then other site. A fluffy appearance of cellulose acetate filaments in the control filter rods was also developed more strongly in soil landfill then on soil surface. From the observation of waste cigarette filters by scanning electron microscopy, much degradation of the fiber of waste cigarette filters could be ascertained in soil landfill. The weight of waste cigarette filters under 5cm from soil surface was reduced about 50%, and the tensile strength of the samples in soil surface and under 5cm from soil surface were reduced 66.0% and 92.4%, respectively. The microbial experiment date that the viable cell number in microbial population and cellulolytic microorganisms showed the maximum values under 5cm from soil surface, suggest that microorganisms in soil play an important roll in the degradation of acetate cigarette filters.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.6-9
• /
• 2015

For many applications of $ReBa_2Cu_3O_{7-x}$ (ReBCO) tapes it is needed to know the anisotropic properties of the used conductor in a broad range of magnetic field. In this paper we present the results of transport measurements on the SuNAM tape (GdBaCuO) with the rotation of the sample in magnetic fields up to 5 T in liquid nitrogen. The critical current over the magnetic field orientation ($I_c({\theta})$) curves demonstrate the appearance of distinct second peak around c-axis in low fields. This peak almost vanishes in the fields over 3 T. The evolution of the ab-peak form is also presented: the peak consistently reduces its height with the magnetic field going up and in the high fields the shoulders rise, changing the type of the distribution. To describe experimental curves the vortex path model was applied to the angular distributions of the critical current in magnetic field. Good agreements of the experimental data with the analytical expressions were obtained that confirm the vortex path model approach.

• Investigative Magnetic Resonance Imaging
• /
• v.21 no.2
• /
• pp.97-101
• /
• 2017

We are reporting about a case of a rheumatoid nodule, beneath the ischial tuberosity, mimicking ischiogluteal bursitis. Rheumatoid nodules are frequently seen, at the subcutaneous soft tissues of repetitive mechanical irritation points, and prominent bones. There have been no reported cases of rheumatoid nodules, extending just beneath the ischial tuberosity bone. A 68-year-old woman with a seven-year history of rheumatoid arthritis, suffered for six months, from right buttock swelling and discomfort in seating. A cystic lesion postero-inferior to the ischial tuberosity, was noted in the MRI scan, which was thought to be ischiogluteal bursitis, because of its characteristic location and appearance. Histopathologic analysis and gross findings on the operation, revealed no evidence of bursitis.

• Journal of Korean Library and Information Science Society
• /
• v.30 no.3
• /
• pp.323-344
• /
• 1999

First, having noticed that the paper on which the Mugujongkyong from the Sokgat'ap was Broussonetia Kazinoki Siebold, produced under the Tochim process, it is confirmed that the paper used for printing the Mugujongkyong form the Sokgat'ap was Broussonetia Kazinoki Siebold produced in Shilla, by introducing the common fact that the papers on which : written in 755 A.D.) and in Soochung-sokt'ap Hwaomasa were written were the same paper fabricated by the Tochim process. Therefore it is proved that the printing place of the Mugujongkyong from the Sokgat'ap was also Kyongju region in Shilla. Furthermore it is proved that the year of storing Broussonetia kazinoki Siebold n which tarani of the Mugujongkyong was written was circa 705 A.D., provin12g that Broussonetia Kazinoki Siebold was in production in Shilla in 8th Century. Also by confirming the fact that very thin -- mere 0.019mm thick -- Broussonetia Kazinoki Siebold was in production in Shilla in 8th Century, it is proved that Shilla has ability to produce Broussonetia Kazinoki Siebold for Woodblock printing purpose. Second, concerning the Muju Characters written in the ugujongkyong from the Sokgat'ap, mixed use of the Muju Characters was noticeable in written in 755 A.D. from the Sooch'ungsokt'ap at the Hwaomsa written in the same era and the Tripitaka Koreana in Japan was printed in 690's A.D. because of appearance of the Muju Characters in the Saddhamapun-darika is erroneous.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.61-68
• /
• 2013

Concrete structure is not the only material vulnerable to physical and chemical processes of deterioration associates with severe conditions. Deterioration of the concrete structure, however, occurs more progressively from the outside of the concrete exposed to severe conditions. Especially, Carbonation, chloride ion attack is more important factor of concrete durability. This study is interested in manufacturing the self-cleaning concrete surface impregnant including TEOS, lithium silicate for the repair of the exposed concrete surface and the color concrete requiring the advanced function in view of the concrete appearance. Form the results, TEOS and lithium silicate are very effective that increasing the concrete durability using self-cleaning concrete impregnant. Self-cleaning concrete impregnant specimens is satisfied with performance requirement of KS standard in adhesion test in tension but the reinforcement of concrete substrate is slight. So, the self-cleaning concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.310-313
• /
• 2002

Structures obtained with a direct boning of two FZ silicon wafers joined in such a way that a smooth surface of one wafer was attached to the grooved surface of the other were studied. A square net of grooves was made with a conventional photo lithography process. After high temperature annealing the appearance of voids and the rearrangement of structural defects were observed with X-ray diffraction topography techniques. It was shown that the formation of void free grooved boundaries was feasible. In the cases when particulate contamination was prevented, the voids appeared in the grooved structures could be eliminated with annealing. Since it was found that the flattening was accompanied with plastic deformation, this deformation was suggested to be intensively involved in the process of void removal. A model was proposed explaining the interaction between the structural defects resulted in "a dissolution" of cavities. The described processes may occur in grooved as well as in smooth structures, but there are the former that allow to manage air traps and undesirable excess of dislocation density. Grooves can be paths for air leave. According to the established mechanisms, if not outdone, the dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.

• Journal of Korean Foot and Ankle Society
• /
• v.2 no.2
• /
• pp.97-101
• /
• 1998

Primary subacute pyogenic osteomyelitis, or Brodie's abscess has received much attention since its initial documentation in the literature in 1832 by Sir Benjamin Brodie. Brodie's abscess is a localized form of chronic osteomyelitis that occurs most often in the metaphyseal area of the long bones of the lower extremities of young adults, Intermittent pain of long duration is the presenting complaint, along with local tenderness over the affected area. Laboratory evaluation is unrevealing, with a normal white blood cell count and differential count. The erythrocyte sedimentation rate may also be normal. Roentgenogram shows a markedly varied appearance and an abscess may be easily mistaken for various neoplasm. The most common organism cultured from abscess is Staphylococcus species. Treatment includes curettage of the lesion and administration of antibiotics. We present a case report (with a 1-year follow-up period), demonstrating the successful surgical treatment of Brodie's abscess of the distal metaphysis of the left tibia caused by Salmonella cholerasuis in a 33-year-0ld male who had no hemoglobinopathy.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.37-43
• /
• 2003

The growing Internet business has required the acceleration of the development of security components. There are many different kinds of security components that have been developed in accordance with the appearance of various logs. Therefore, it is important that after the logs are collected they become integrated and need to Once the data from the logs have been collected form the IDS/Firewall/Router logs. It needs to be analyzed and formatted for standardization. This paper suggests designs that the log analyzation system could use in analyzing, detecting, and preventing intrusion in the various systems. Once the data has been analyzed it would be possible to Prevent further intrusion as well as trace the intrusion back to the source.

• Advances in materials Research
• /
• v.4 no.2
• /
• pp.113-132
• /
• 2015

The phenomena of high-voltage polarization and conductivity in oriented vinylidenefluoride and tetrafluoroethylene copolymer films have been investigated. It was shown that under certain electric fields, injection of carriers from the material of electrodes appears The barrier for holes injection in the copolymer was found to be lower than that for electrons. It results in more effective screening of the external field near the anode than near cathode. Electrones, ejected from cathode, creating negative charge by trapping on the surface. It is shown that the electrons injected from cathodes create a negative homocharge on the copolymer surface and then become captured on the surface shallow traps. Their nature has been studied by the x-ray photoelectron spectroscopy. It was shown that these traps may consist of chemical defects in the form of new functional groups formed by reactions of surface macromolecules with sputtered atoms of aluminum. The asymmetric shape of hysteresis curves was explained by the difference in mobility of injected holes and electrons. These factors caused appearance of "non-closed" hysteresis curves for fluorine-containing polymer ferroelectrics. Hysteresis phenomena observed at low electric fields (below coercive ones) are to associate with the behavior of the domains localized in the ordered regions formed during secondary crystallization of copolymers.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.8
• /
• pp.650-654
• /
• 1994

Stable polyion-complexed polymeric monolayers were prepared by spreading perfluoroalkyl monomaleate copolymers, $C_2F_8MA-VE_2$ and $C_2F_8MA-VE_3$, on a aqueous poly(allylamine) subphase. The monolayer properties have been studied by the surface pressure-area (${\pi}$-A) isotherms. The $C_2F_8MA-VE_3$ containing longer oligoethyleneglycol pendant showed more expanded monolayer phase than the $C_2F_8MA-VE_2$. The polyion-complexed monolayers were transferable on various substrates, and the resulting Langmuir-Blodgett (LB) films were characterized by FT-IR spectroscopy and scanning electron microscopy (SEM). Two-dimensional crosslinking to form a polymer network was achieved by amide formation through heat treatment under vacuum with concurrent removal of perfluoroalkyl tails. SEM observation of this film on a porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore size of 0.1 ${\mu}$m. The $C_2F_8MA-VE_3$ revealed better covering capability than the $C_2F_8MA-VE_2$. Immersion of this film in water or in benzene did not cause any change in its appearance and in Fl-IR spectra.