• Toxicological Research
• /
• v.26 no.4
• /
• pp.301-313
• /
• 2010

Growth promoters including hormonal substances and antibiotics are used legally and illegally in food producing animals for the growth promotion of livestock animals. Hormonal substances still under debate in terms of their human health impacts are estradiol-$17\beta$, progesterone, testosterone, zeranol, trenbolone, and melengestrol acetate (MGA). Many of the risk assessment results of natural steroid hormones have presented negligible impacts when they are used under good veterinary practices. For synthetic hormonelike substances, ADIs and MRLs have been established for food safety along with the approval of animal treatment. Small amounts of antibiotics added to feedstuff present growth promotion effects via the prevention of infectious diseases at doses lower than therapeutic dose. The induction of antimicrobial resistant bacteria and the disruption of normal human intestinal flora are major concerns in terms of human health impact. Regulatory guidance such as ADIs and MRLs fully reflect the impact on human gastrointestinal microflora. However, before deciding on any risk management options, risk assessments of antimicrobial resistance require large-scale evidence regarding the relationship between antimicrobial use in food-producing animals and the occurrence of antimicrobial resistance in human pathogens. In this article, the risk profiles of hormonal and antibacterial growth promoters are provided based on recent toxicity and human exposure information, and recommendations for risk management to prevent human health impacts by the use of growth promoters are also presented.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.700-708
• /
• 2019

To verify the possibility of using resistograph to estimate the age of big old living trees, we selected three Zelkova serrata and seven Pinus densiflora in Goesan. The mean diameters at breast height of Z. serrata and P. densiflora were 102 (92-116) cm and 80 (65-110) cm, respectively. The heights measured from the ground using a resistograph ranged at 1.2-4.3 m and 0.6-1.1 m for Z. serrata and P. Densiflora, respectively. The most appropriate needle speed to determine tree-ring boundaries for measuring ring width was 1500 r/min for both tree species. Alternatively, the suitable feed speeds for Z. serrata and P. densiflora were 50 cm/min and 150 cm/min, respectively. From the measured data, the mean numbers of tree rings of Z. serrata and P. densiflora were 57 (43-68) and 104 (93-124), respectively, and the mean tree-ring widths were 4.27 mm (3.18-5.09 mm) and 2.93 mm (2.32-3.34 mm), respectively. A comparison between the time series of tree-ring widths by resistograph and that from the local master chronologies tallied for the heartwood part. Finally, this study showed that resistograph can be used to estimate tree ages when a local master chronology is available.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8_spc
• /
• pp.1219-1232
• /
• 2019

The global goat population continues to grow and is now over one billion. The number of goats raised primarily for milk production is also growing, due to expanding demand. Most of the world dairy goat production and consumption is in Asia, but a global view of the dairy goat sector reveals important lessons about building successful modern dairy goat industries. The most organized market for goat milk is found in Europe, especially in France. The European goat sector is specialized for milk production, mostly for industrial cheesemaking, while also supporting traditional on-farm manufacturing. Government involvement is significant in sanitary regulation, research, extension, support for local producer organizations, and markets, and ensures safety and quality. Nonetheless, producers are still vulnerable to market fluctuations. New dairy goat industries are developing in countries without a long goat milk tradition, such as China, the United States, and New Zealand, due to rising consumer demand, strong prices, and climate change. The mix of policies, management and markets varies widely, but regardless of the country, the dairy goat sector thrives when producers have access to markets, and the tools and skills to sustainably manage their livestock and natural resources. These are most readily achieved through strong and inclusive producer organizations, access to technical services, and policies that enable the poor and marginalized groups to benefit from increasing demand.

• Steel and Composite Structures
• /
• v.42 no.2
• /
• pp.161-172
• /
• 2022

In this paper, four specimens of CFST column joints with endplates and long bolts are tested in the scenario of progressive collapse. Flush endplate and extended endplate are both adopted in this study. The experimental results show that increasing the thickness of the endplate could improve the behavior of the joint, but delay the mobilization of catenary action. The thickness of the endplate should not be relatively thick in comparison to the diameter of the bolts, otherwise catenary action would not be mobilized or work effectively. Effective bending deformation of the endplate could help the formation and development of catenary action in the joints. The performance of flexural action in the joint would affect the formation of catenary action in the joint. Extra middle-row bolts set at the endplates and structural components set below the bottom beam flange should be used to enhance the robustness of joints. A special weld access hole between beam and endplate should be adopted to mitigate the chain damage potential of welds. It is suggested that the structural components of joints should be independent of each other to enhance the robustness of joints. Based on the component method, a formula calculating the stiffness coefficient of preloaded long bolts was proposed whose results matched well with the experimental results.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.35-44
• /
• 2014

In this study, the bio-phytoremediation and phytoremediation technologies were applied to the soils contaminated with total petroleum hydrocarbons (TPH) and heavy metals to evaluate the remediation efficacy from May 2012 to December 2013. Poplar (Populus bonatii Levl.) and Sun Hemp (Crotalaria juncea L.) were selected and planted in phytoremediation practice. These plants were also utilized in the bio-phytoremediation practice, with the addition of earthworm (Eisenia fetida) and petroleum-degrading bacteria (Pseudomonos sp. NKNU01). Furthermore, physiological characteristics, such as photosynthesis rate and maximal photochemical yield, of all testing plants were also measured in order to assess their health conditions and tolerance levels in adverse environment. After 20 months of remedial practice, the results showed that bio-phytoremediation practice had a higher rate of TPH removal efficacy at 30-60 cm depth soil than that of phytoremediation. However, inconsistent results were discovered while analyzing the soil at 100 cm depth. The study also showed that the removal efficiency of heavy metals was lower than that of TPH after remediation treatment. The results from test field tissue sample analysis revealed that more Zinc than Chromium was absorbed and accumulated by the tested plants. Plant height measurements of Poplar and Sun Hemp showed that there were insignificant differences of growth between the plants in remediation plots and those in the control plot. Physiological data of Poplar also suggested it has higher tolerance level toward the contaminated soils. These results indicated that the two testing plants were healthy and suitable for this remediation study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.27-35
• /
• 2007

In order to take measures for solving conflicts between the relevant Ministries of Korean government such as MOMAF(Ministry of Maritime Affairs and Fisheries) and MAF(Ministry of Agriculture and Forestry) and the relevant industry circles such as KSA(Korea Swine Association) and KODA(Korea Ocean Dumping Association) regarding the prohibition of ocean dumping of livestock excreta wastes from land, the present conditions of marine disposal of livestock excreta wastes and the standpoints of MOMAF, MAF, KSA and KODA were reviewed in Korea. As measures for solving the conflicts, the followings were proposed; A prior examination into the possibility of the treatment and/or disposal on shore for the total amount of livestock excreta wastes in Korea, measures for solving civil appeals against the problems arising from the treatment and/or disposal on shore of livestock excreta wastes, a prior examination into the possibility of the execution of the amendments to the relevant rules and regulations of Korean marine pollution prevention law for the prohibition of ocean dumping of livestock excreta wastes, measures for supporting the relevant industry circles such as KSA and KODA which were expected to suffer from the prohibition of ocean dumping, and an overall review of the national system for ocean dumping of terrestrial wastes in nationwide level.

• New & Renewable Energy
• /
• v.9 no.4
• /
• pp.13-18
• /
• 2013

Wind turbines should generally be installed at a certain distance from a road to ensure passengers' safety. In Korea, there is no clear guidance as the Ministry of Environment first proposed a road setback distance of 400 m in the Onshore Wind Farm Siting Guidelines draft proposed in July 2012, and then modified it to 1.5 times the height of the wind turbine in October of the same year. This study analyzed the dynamic range of onshore wind resource potential according to how the road setback distance is set using the Korea Wind Atlas with 100m spatial resolution made by the Korea Institute of Energy Research, the transportation network of the Ministry of Construction and Transportation, and the forest road network of the Korea Forestry Service. Owing to the geographical characteristics of Korea, where mountainous terrain accounts for 70% of the total territory, the wind resource potential within 1 km from forest roads are estimated to be 14.3 GW, 14% of Korea's total wind resource potential. In addition, the construction distance of new road for transporting wind turbines from the existing road to a wind farm site is estimated as less than 2 km. Given the limited wind resource potential and geographical constraints, an assessment system that can maximize wind resource utilization and ensure road safety at the same time, and which takes into account the regional characteristics instead of applying the fixed road setback distance across-the-road, is required.

• Journal of Korea Foresty Energy
• /
• v.23 no.2
• /
• pp.29-33
• /
• 2004

This study was carried out to find out safety disposal methods of waste CCA treated wood. The heavy metals of remnant were analyzed after combustion of CCA treated wood at different temperatures. Arsenic volatilized temperature was detected. The removal rate of heavy metals by acid in the ash were examined. Through this study, we could conclude that in order to protect volatilize arsenic, combustion of CCA treated wood should be do under the $300^{\circ}C$. But when CCA treated wood combustion under $300^{\circ}C$, it's weight-loss rate was $55\%$, so land reclamation dependence will be increased. When CCA treated wood combustion at high temperature, the land reclamation dependence could be reduced, but the arsenic that volatilize into the atmosphere should be captured. When it bums with high temperature, the ash contains lots of copper and chromium, so removal of heavy metals should be conducted.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.59-67
• /
• 2019

In this study, the UAV (Unmammed Aerial Vehicle) was applied for the photogrammetry of the construction site and the safety management of steel pipe scaffold. The research site is a temporary facility for building reinforcement on Samcheok Campus of Kangwon National University. The installation condition of the steel pipe scaffold was investigated, and the pillar distance, the beam distance and the wale distance were surveyed. As a result, it was found that the beam distance of the scaffold in the longitudinal direction was in good agreement with the standard, but the pillar distance and the wale distance were found to be less than the standard. Three-dimensional data can be used in drone shooting to enable three-dimensional measurement, so that it is possible to measure facilities hidden or located inside other facilities. Through the drone shooting, the condition of the site can be quickly recorded and the surveying can be carried out without interfering with the work of the field personnel. Although the installation of the temporary structure must be strictly observed to ensure the safety of the workers, it is found that the installation standards are still neglected in the field. In order to prevent this practice, it was thought that the legal system should be supplemented so that it could be checked periodically by using UAV in the field process management.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.189-199
• /
• 2015

Our country's leading granite weathered soil of the ground slope failures that occur in cutting slope most cases, it does not require in-depth to the shear strength most of the surface layer is affected by weathering (1~2 m) at a shallow depth close to the ground, it is important to identify the reliability. Based on the result obtained in actual field investigation, the field slope type was classified by each type of wedge slope, Infinite slope, finite slope -I and finite slope -II, and the slope stability was examined respectively. In addition, using the numerical analysis results, the relationship between the slope inclination angle and safety factor was analyzed and it tried to offer basic data to which the stability in the field slope was able to be estimated by analyzing the safety factor change of the slope according to the slope type. In this study, classified into four types of natural slope, safety factor estimation method by slope types is proposed through the numerical analysis. However, some limit exists in generalizing in this research because it does not test various case studies. Therefore, the case study of a wide range of various sypes to assess the safety of various types slope can be made, accommodate a wide range of field conditions reasonable risk evaluation criteria may be derived.