• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.690-695
• /
• 2002

In this forest fire experiment the ThermoViewer was set up on the platform built on a tree and observed the temperature change, before, during and after the fire. The fire experiment had been carried out not only the day of the forest fire experiment but also continued for four months after the forest fire had been gone. The results from the experiment showed that the temperature difference is significant in the afternoon; therefore, afternoon satellite passing is better and suitable time for active forest fires and burnt scars detection; moreover, after 83 days, the burnt and un-burnt vegetation become almost the same condition, fully regenerated and the temperature difference become nearly 0$^{\circ}$ Celsius, so there is not enough temperature different between burnt and un-burnt vegetation for current sensors to distinguish the difference anymore.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.69-78
• /
• 2010

Haines index which include the rating of atmosphere instability and dryness indicated the potential of the forest fire danger. In this study, the relationships between forest fire occurrence and Haines index were analyzed. The probability of forest fire occurrence was the highest in April and HI 5, 6 and the dryness of atmosphere was higher than the atmosphere instability. Therefore, It was proved that HI affected on the forest fire occurrence and propagation.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.781-787
• /
• 2001

The spread rate of forest fire was analyzed on Samcheok forest fire that broke out on April 7, 2000 in Kunduck-Myun, Samcheok-City, Kangwon-Province and lasted for about 9 days. The spatial database including topography, overstory species distribution, micro-climate, daily fire front lines for the area was built using GIS and the daily spread pattern was investigated to determine a multiple regression equation to estimate forest fire spread rate. The results of the investigation showed that, on the first day, the forest fire spreaded out extremely fast up to 12.3m/min at about 10 a.m. until noon. After that, the forest fire spread rate fluctuated and slowed down as low as below 1m/min and quenched on April 15. The daily area-based spread rate along the fire spread line got to the peak of about 5,700ha on April 11, of which spread rates were recorded as 2.84m/min in the first half and 1.10m/min in the second half. Also, it was found that slope aspect, wind velocity and % area distribution of Pinus densiflora are the major factors affecting the spread rate of forest fire in this area.

• Fire Science and Engineering
• /
• v.23 no.2
• /
• pp.96-100
• /
• 2009

Because of dense forests and restriction of approaching for fire fighters, forest fire is easy to be a larger fire in Korea. For this result, the air attack was about 90% of extinguishing, so the application of aircrafts, especially helicopters, will be increased gradually. In the all process of forest fire attack, the method of heli-scattering water was the chief element of success of efficient forest fire attack and safe flight. Therefore, a standardized method of heli-scattering water was required. However, as it was not already standardized, a efficiency and safety of fire fighting have been decreased. In this study, we suggest a 11 patterns of methods for scatterling water based on a actual experience of air attack.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.533-536
• /
• 2007

The LiDAR data structure has the potential for modeling in three dimensions because the LiDAR data can represent voxels with z value under certain defined conditions. Therefore, it is possible to classify the physical damaged degree of vegetation by forest fire as using the LiDAR data because the physical loss of canopy height and width by forest fire can be relative to an amount of points reached to the ground through the canopy of damaged forest. On the other hand, biological damage of vegetation by forest fire can be explained using the NDVI (Normalized Difference Vegetation Index) which show vegetation vitality. In this study, we graded the damaged degree of vegetation by forest fire in Yangyang-Gun of South Korea using the LiDAR data for physical grading and digital aerial photograph including Red, Green, Blue and Near Infra-Red bands for biological grading. The LiDAR data was classified into 2 classes, of which one was Serious Physical Damaged (SPD) and the other was Light Physical Damaged (LPD) area. The NDVI was also classified into 2 classes which are Serious Biological Damaged (SBD) and Light Biological Damaged (LBD) area respectively. With each 2 classes ofthe LiDAR data and NDVI, the damaged area by forest fire was graded into 4 degrees like damaged class 1,2,3 and 4 grade. As a result of this study, 1 graded area was the broadest and next was the 3 grade. With this result, we could know that the burned area by forest fire in Yangyang-Gun was damaged rather biologically because the NDVI in 1 and 3 grade appeared low value whereas the LiDAR data in 1 and 3 grade included light physical damage like the LPD.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.8-16
• /
• 2005

Fire-killed trees of Korean red pine are valuable resources for industrial uses. It is common only believed that fire-killed trees are too weak and brittle to use in construction purposes. The misunderstandings of fire-killed trees lead these valuable resources abandonment. The purposes of this research are focused on scrutinization of material properties of fire-killed trees to facilitate industrial uses of these resources. The sample logs were collected from the forest fire site of the eastern coast area in which the most catastrophic wild fire had taken place in 2000. Fire-killed Korean red pines were classified into 3 levels by the degree of fire damage so called light, medium and heavy, then their physical, mechanical and chemical properties were compared with sound trees. No significant difference in physical appearances were found in the cross sections by degree of damage compared to sound tree but bark char. Investigation on mechanical and chemical properties indicates that forest fire did not impact significantly in lowering the strength of damaged trees. It was concluded that there was any limitation of forest fire-killed trees of Korean red pine in industrial utilization.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.161-164
• /
• 2008

We studied a basic concept and application about FARSITE, which is a forest fire spread simulator for preventing and predicting fire in United States Department of Agriculture(USDA). And, we researched a problem in the transition for introducing, so we serve the basic method for prevention and attacking fire. For this transition, we compared the behavior of the 2005 Yangyang forest fire with the result of a simulation. The spread direction is similar to real data. But, while mean spread of rate was 0.65km/hr on real data, it was 0.3km/hr on simulation. As Damaged area is 1,387ha on real, it was 5,368ha on simulation. Therefore, it is necessary to establish a fuel concept for more accurate simulation.

• Korean Journal of Remote Sensing
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2004

The usefulness of the multi-temporal satellite image to monitoring the vegetation recovery process after forest fire was tested. Using multi-temporal Landsat TM and ETM＋data, NDVI and NBR changes over times were analyzed. Both NDVI and NBR values were rapidly decreased after the fire and gradually increased for all forest type and damage class. However, NBR curve showed much clearer tendency of vegetation recovery than NDVI. Both indices yielded the lowest values in severely damaged red pine forest. The results show the vegetation recovery process after forest fire can detect and monitor using multi-temporal Landsat image. NBR was proved to be useful to examine the recovering and development process of the vegetation after fire. In the not damaged forest, however the NDVI shows more potential capability to discriminate the forest types than NBR..

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.95-100
• /
• 2009

Fine fuel moisture code (FFMC), a main component of forest fire weather index(FWI) in the Canadian forest fire danger rating system(CFFDRS), indicated a probability of ignition through expecting a dryness of fine fuels. According to this code, a rising of temperature and wind velocity, a decreasing of precipitation and decline of humidity in a weather condition showed a rising of a danger rate for the forest fire. In this study, we analyzed a weather condition during 5 years in Kangwon province, calculated a FFMC and examined an application of FFMC. Very low humidity and little precipitation was a characteristic during spring and fall fire season in Kangwon province. 75% of forest fires during 5 years occurred in this season and especially 90% of forest fire during fire season occurred in spring. For developing of the prediction model for a forest fire occurrence probability, we used a logistic regression function with forest fire occurrence data and classified mean FFMC during 10 days. Accuracy of a developed model was 63.6%. To improve this model, we need to deal with more meteorological data during overall seasons and to associate a meteorological condition with a forest fire occurrence with more research results.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.232-243
• /
• 2024

Purpose: Recently, large-scale forest fires caused by climate change, natural disasters, and human factors have been increasing every year in the East Coast and Taebaek Mountains region. Although forest fire extinguishing using helicopters is currently increasing, the need to introduce air force transport aircraft has continued to be raised due to the importance of early fire extinguishment to respond to large forest fires and the difficulty of extinguishing forest fires between sheep. This study seeks to present a plan for developing a post-fire management system for several aspects - achieving operational objectives, overcoming the operating environment, selecting a staging area, and efficient operation measures - to efficiently perform forest fire extinguishing missions using Air Force transport aircraft. Method: Based on literature research on forest fire extinguishing, forest fire extinguishing experiments using fixed-wing aircraft, and the operation status and operation method of forest fire extinguishing helicopters, the pros and cons of helicopter operation and the effects of large forest fire extinguishing using a large transport aircraft (C-130) Analyze the effectiveness of operation through analysis. Results: When extinguishing a large forest fire, an effective CM (Consequence Management) application plan was derived, including effective operation, control, command system, dispatch request, and forest fire extinguishment when integrating helicopter and fixed-wing aircraft (C-130). Conclusion: The application of the concept of CM (Consequence Management) is partially applied to some areas of chemical, biological, and radiological (CBRNE) protection in Korea, but efficient operation, control, and command systems are established when integrated operation of helicopters and large aircraft (C-130) in forest fire extinguishment. the concept of CM (Consequence Management), which is operated in advanced countries, was applied for safety management, dispatch requests, and forest fire extinguishing, thereby contributing to the establishment of a more advanced disaster and post-disaster management system.