• Journal of Forest and Environmental Science
• /
• 제39권4호
• /
• pp.254-260
• /
• 2023

A sensor system has been developed that uses an ultrasonic sensor to detect the downhill slope on the side of a forest road and prevents a vehicle-type forest machine from rolling down a mountainside. A specular reflection of ultrasonic wave might cause severe issues in measuring distances to targets. By investigating the installation angle of the sensor to minimize the negative effects of specular reflection, the installation angle of lateral monitoring ultrasonic sensor could be determined based on the width of road shoulder. Obstacles such as small rocks or piece of log in a forest road may cause the forest machine to be overturned while the machine riding over due to excessive its posture change. It was determined that the laser sensor could be a part of a sensor system capable of specifying the location and size of small obstacles. Not only this sensor system including ultrasonic and laser sensors can issue a warning of dangerous sections to drivers in forest forwarders currently in use, but also it can be used as a driving safety sensor in autonomous forest machine or remote-control forest machine in the future.

• 생태와환경
• /
• 제54권1호
• /
• pp.61-70
• /
• 2021

The effects of forest type and fragmentation of forests by a road on the beetle community were investigated in the Gwangneung Forest, South Korea. Beetles were collected monthly using pitfall traps and by sweeping at 16 sites (eight in coniferous forests and eight in deciduous forests) for one year from April 1993 to April 1994, excluding winter. A total of 17,616 beetles belonging to 271 species from 39 families were collected. Among them, Synuchus cycloderus was the dominant species, with 14,060 individuals accounting for 80% of the total population. The influence of forest type (coniferous and deciduous) or sampling region (fragmented by a road) on species richness(number of species) was observed. We found that species richness was substantially different depending on the sampling method and taxa used. Beetles collected using pitfall traps responded more sensitively to habitat types than those collected by sweeping. Four dominant families differently responded to forest fragmentation and forest types. Carabidae was influenced by forest fragmentation, whereas Staphylinidae and Curculionidae were influenced by forest types. Chrysomelidae was not influenced.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.71-75
• /
• 2014

Forest roads failure is one of the most common problems caused by heavy rainfalls. This study investigated the characteristics on stabilization measures installed for cutting slopes failure of forest road resulted from heavy rainfalls. Three primary factors (slope length, slope gradient, soil type) affecting cutting slope failure were considered and stabilization measures were classified into two types (A type: wooden fence, vegetation sandbag, stone masonry; B type: wire cylinder, gabion, concrete retaining wall) through discriminant analysis based on their capacity of resistance to slope failure. Results showed that A type was mainly installed in such conditions as cut slope <8 m, cut slope gradient $30-40^{\circ}$ and soil type with soil while B type occurred in locational conditions as cut slope length >8 m, cut slope gradient < $30^{\circ}$ and > $30^{\circ}$, and soil type of gravelly soil and rock.

• 한국산림과학회지
• /
• 제105권4호
• /
• pp.449-455
• /
• 2016

본 연구는 임도사업의 계획과 유지관리 단계에서 임도 관리자 집단의 의식성향을 파악하여 체계적인 임도 정책 수립을 위한 기초자료를 제공하기 위하여 수행하였다. 임도의 계획과 유지관리에 대한 설문조사 결과, 임도 노선의 계획시 고려사항으로는 육림작업, 산지재해 예방, 목재수확 등의 항목에서 높은 중요도를 보였으며, 간선임도에 대한 선호도가 가장 높게 나타났다. 또한 임도 유지관리 작업의 적절성에 대해서는 두 집단 모두 인력 및 예산부족으로 인한 어려움(92.9%)이 있다고 응답하였다. 임도의 개설로 우려되는 주요 피해형태로는 사면붕괴로 인한 인명피해, 사유지 통행에 대한 분쟁 등의 순으로 나타났으며, 현재 실행하고 있는 임도 유지 관리작업의 주요 내용으로는 배수시설의 정비와 노면정비가 높게 나타났다. 임도시설에 대한 주요 보완사항으로는 배수시설, 비탈면 녹화와 안정에 대한 응답이 높게 나타났다.

• Journal of Forest and Environmental Science
• /
• 제18권1호
• /
• pp.7-14
• /
• 2001

본 연구는 집중호우로 인하여 절토사면의 붕괴가 발생한 임도를 대상으로 수량화이론(II)을 이용하여 붕괴요인을 평가하였다. 그 결과는 다음과 같다. 임도 절토사면의 붕괴발생에 미치는 요인의 영향은 절토사면길이, 겉보기 토질, 사면방위, 절토사변경사, 산지경사 등 5개 요인이 가장 크게 나타났다. 특히, 절토사면길이는 8m 이상, 겉보기 토질은 토사, 사면방위는 북사면, 절토사변경사는 $60^{\circ}$이상, 산지경사는 $35{\sim}40^{\circ}$ 사이에서 사면붕괴에 기여도가 가장 크게 나타났다.

• 한국산림과학회지
• /
• 제107권3호
• /
• pp.278-286
• /
• 2018

본 연구는 강원대학교 학술림 임도를 대상으로 횡단배수구의 유출구 피해 유무에 영향을 미치고 있는 총 10개 인자를 조사하여 피해특성을 파악하였다. 그 결과는 다음과 같다. 임도횡단배수구 피해유무에 영향을 미치지 않은 인자는 배수구의 종단위치, 횡단위치, 토질 및 관암거 높이이며, 피해영향에 관련된 인자는 유출구 위치, 도수로 유무, 관암거 직경, 관암거 경사, 집수정 크기 등의 순으로 영향을 미치고 있다. 또한 이들 인자를 이용하여 임도횡단배수구 유출구 피해유무 예측을 위한 판별함수식을 도출하였으며, 판별적중률은 68.8%로 산출되었다.

• 농업과학연구
• /
• 제47권4호
• /
• pp.727-742
• /
• 2020

Point cloud-based 3D maps can obtain many kinds of information for maintenance work on forest road networks. This study was conducted to compare the importance of each factor to select the factors required for the mapping of 3D forest road maps. This can be used as basic data for attribute information required to maintain forest road networks. The results of this study found that out of a total of 30 indexes extracted for mapping 3D forest roads, a total of 21 indexes related to stakeholder groups were significantly different. The importance of the index required by the civil service group was significantly higher than that of the other groups overall. In the case of the academic group, the index importance for cut slope, fill slope, and drainage facility was significantly higher. On the other hand, the index importance for the forestry cooperative and forest professional engineer group was mostly distributed between the civil servants' group and the academic group. In particular, the type of drainage system showed the highest value among the detailed indexes. Overall, drainage related factors in this survey had high coefficient values. The impact of water on forest roads was the most important part in road maintenance. In addition, the soil texture had a high value in relation to slope stability. This is thought to be because the texture of the soil affects the stability of the slope.

• 한국산림과학회지
• /
• 제76권2호
• /
• pp.161-168
• /
• 1987

임업기계훈련원(林業機械訓練院)에서 1984년(年) 시범적(示範的)로 임도(林道)를 시설(施設)(10 km)할 목적(目的)으로 10 km를 시공(施工)했는데 1986년(年) 태풍(颱風) 내습시 부분적(部分的)으로 노견붕괴(路肩崩壞)와 측구침식(側溝浸蝕)이 발생(發生)하였다. 이에 대한 원인(原因)을 조사분석(調査分析)한 결과(結果)는 다음과 같다. 측구침식(側溝浸蝕)에 의한 피해(被害)길이는 전림도(全林道) 연장(10km)의 3%에 해당하였으며, 대부분(大部分) 요형사면(凹型斜面)에 사면장(斜面長) 10m 이상(以上)으로 성토(盛土)된 곡선부(曲線部)에서 발생하였고, 부분적(部分的)으로 상수(常水)가 흐르는 계곡부(溪谷部)에 성토(盛土)된 구역(區域)과 상수(常水)가 있는 배수관(排水管)의 유출구(流出口) 양사면(兩斜面)에 성토(盛土)된 부위에서 붕괴(崩壞)가 많이 발생하였다. 측구침식(側溝浸蝕)의 경우 심한 피해(被害)는 계곡수(溪谷水)가 월수(越水)하여 V형(型) 측구(側溝)를 따라 흐르므로서 피해(被害)를 발생시켰으며, 기타 원인(原因)으로는 종단(縱斷)물매가 10% 이상(以上) 급(急)하게 시공(施工)된 지역(地域)에서 나타나 문제점(問題點)으로 인식되고, 직경(直經) 400mm 이하(以下)인 배수관(排水管)이 매설된 집수정(集水井)이 낙엽(落葉) 등(等)의 퇴적(堆積)으로 매몰된 경우와 경사가 급한 침사지(沈砂池)(집수승(集水桝)) 벽이 무너져 내린 결과 이 지점을 월수(越水)하여 측구침식(側溝浸蝕)을 일으키고 있다. 이상(以上)의 결과(結果)에서 시범임도(示範林道)의 태풍피해(颱風被害)는 임도피해예방(林道被害豫防)을 위한 경험부족(經驗不足)에서 나타낸 현상으로 보인다. 상기(上記)와 같은 점을 개선하면 동(同) 시범임도(示範林道) 조성방법(造成方法)은 경제적(經濟的) 임도(林道)차 모델로서 발달될 수 있을 것이다.

• 한국환경과학회지
• /
• 제23권7호
• /
• pp.1349-1358
• /
• 2014

This study suggests plan of green space management based on the result of research apprehending the characteristic through sorting types of city thermal environment targeting summer which thermal pollution is the most serious. Considering anthropogenic heat, development level of wind road, thermal environment, as a result of types of thermal environment process, it is appeared 36 types, and 10 types is relevant of this research subject. Type I-1, size of building is large, artificial covering area is wide, and thermal load of anthropogenic heat is high, type II-1, development condition of wind road is incomplete as IIlevel, entering cold air is difficult and thermal management and improvement is needed area. Type III-1, scale is large and it is area of origin of cold air, development level of wind road is mostly favorable, type III-2 is revealed as smaller scale than III-1, and small area of origin of cold air. Type IV, anthropogenic heat is $81{\sim}150W/m^2$, average, but development function of wind road is very favorable. Type V, large area of thermal load and the origin of cold air are distributed as similar ratio, and level of development function of wind road is revealed as II level. According to standard of type classification of thermal environment, as a result of suggesting plan of green space management and biotops area ratio, type I-1 is buffer green space and waterway creation, goal biotops area ratio 35%, type II-1 afforestation in site and goal biotops area ratio 40%, type III-1, preservation plan to display the current function continuously is requested. Type IV suggests afforestation of stream current, and type V suggests quantitative increase of green space and goal biotops area ratio 45%.

• 한국환경과학회지
• /
• 제14권6호
• /
• pp.521-524
• /
• 2005

We introduce a simplified crossing wood drain disperses rain water concentration and is used to protect the road surface from erosion due to flooding over the unpaved road. The efficiency of a simplified crossing wood drain was also investigated. A structure of simplified crossing wood drain can be produced within 10 minutes and installed within 18 minutes. The cost of the this product is 1/5 of that of the existing crossing drain product. The production and installation cost can be reduced according to dexterity. In the context of such applications, the degrees of damage for a rubber pad, which preventing the rain overflow, were varied according to their materials. A type of 8.2mm thick fabric rubber was the most suitable in this study.