• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.102-102
• /
• 2009

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.81-91
• /
• 2011

Current fuel ethanol research and development deals with process engineering trends for improving biotechnological production of ethanol. Recently, a large amount of studies regarding the utilization of lignocellulosic biomass as a good feedstock for producing fuel ethanol is being carried out worldwide. The plant biomass is mainly composed of cellulose, hemicellulose and lignin. The main challenge in the conversion of biomass into ethanol is the complex, rigid and harsh structures which require efficient process and cost effective to break down. The isolation of microorganisms is one of the means for obtaining enzymes with properties suitable for industrial applications. For these reasons, crude cultures containing cellulosic biomass degrading microorganisms were isolated from rice field soil, cow farm soil and rotten rice straw from cow farm. Carboxymethyl cellulose (CMC), xylan and Avicel (microcrystalline cellulose) degradation zone of clearance on agar platefrom rice field soil resulted approximately at 25 mm, 24 mm and 22 mm respectively. As for cow farm soil, CMC, xylan and Avicel degradation clearancezone on agar plate resulted around at 24mm, 23mm and 21 mm respectively. Rotten rice straw from cow farm also resulted for CMC, xylan and Avicel degradation zone almost at 24 mm, 23 mm and 22 mm respectively. The objective of this study is to isolatebiomass degrading microbial strains having good efficiency in cellulose hydrolysis and observed the effects of different substrates (CMC, xylan and Avicel) on the production of cellulase enzymes (endo-glucanase, exo-glucanase, cellobiase, xylanase and avicelase) for producing low cost biofuel from cellulosic materials.

• 신재생에너지
• /
• 제9권4호
• /
• pp.40-50
• /
• 2013

This study was performed to investigate the potential of torrefied tulip tree (TT) for the production of pellets. For this purpose, chemical composition and fuel characteristics of torrefied TT were examined. In addition, pellets were fabricated by using sawdust of torrefied TT chip, and durability of the pellet was measured. Lignin content of torrefied TT was higher than that of non-torrefied TT, and increased with the increases of torrefaction temperature and time. Fuel characteristics of torrefied TT were affected by torrefied conditions, and the characteristics were influenced more by torrefaction temperature than by torrefaction time. Higher heating value (HHV) and ash content (AC) of torrefied tulip tree increased with increasing torrefaction temperature, and the values were much higher than HHV and AC values of non-torrefied TT. Durability of pellets fabricated with $230^{\circ}C$- and $250^{\circ}C$-torrefied TT was higher than that of $270^{\circ}C$-torrefied TT, and the value exceeded the minimum requirement (-97.50%) of the 1st-grade pellet standard designated by Korea Forest Research Institute. Based on the results, torrefaction treatment of $250^{\circ}C/50min$ to TT might be a optimal condition for the production of TT pellets considering the mass balance and fuel characteristics of TT as well as the durability of the pellets. Thus, it is confirmed that torrefied TT can be used as a raw material for the production of bio-pellets.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.1-10
• /
• 2007

최근 미국 에너지 시장에서 수송용 바이오연료 생산과 바이오매스자원으로부터의 원료공급 가능성 등에 대하여 조사 연구되었다. 미국의 국가에너지정책의 1차 목표는 수입원유에 대한 의존을 줄이고 다양한 국내자원으로 에너지생산을 증가시키는 것으로 2030년에는 현재 수송용 에너지의 20%를 바이오연료로 대체할 목표이다. 정책적으로 청정공기법령(Clean Air Act), 연방청정연료(Federal Clean Fuel) 프로그램 및 American Jobs Creation Act를 통하여 바이오연료 사용을 증가시키는 노력을 하고 있다. 에너지 원료로서 산림바이오매스는 년간 3억 6800만 dry tons, 농업에서 얻어지는 원료는 현재의 BT기술을 이용한 작물품종 및 경작기술 개발, 농지사용 변화를 기반으로 했을 때 년 간 총 9억 9800만 dry tons이고 이중에서 목질계 바이오매스는 8억 1800만 dry tons이다 현재의 농업상황에서 생산되는 량의 5배에 해당하는 바이오매스 공급가능성이 예측되었다.

• Journal of Forest and Environmental Science
• /
• 제29권1호
• /
• pp.81-89
• /
• 2013

Nowadays, excessive using of fossil fuel contributes to global warming. Also, this phenomenon increases steadily. Therefore forest biomass from logging residues has received attention. The goal of this study was to determine the sustainability and economic feasibility of forest-biomass energy source. Accordingly, forest biomass resource was calculated, and harvesting and transporting machines which can be used in investing area were chosen, when using forest biomass as energy source. And then through these data, the harvesting cost was decided. The forest biomass resource calculated, thinned trees and logging residues, was 37,330.23 $m^3$ and 14,073.60 ton, respectively. When harvesting timber in each sub-compartment, the average thinned trees yield was 120.73 $m^3$, and tree logging residues was 402.80 ton. The use of tower yarder as harvesting and transporting equipments in study area was 85.4% and 66.7%, respectively, in up hill and down hill yarding. The average harvesting cost of biomass in the possibility area of timber yarding operation was expensive as 81,757 won/$m^3$, 85,434 won/m3 and 50,003 won/ton, respectively, in thinned trees and logging residue. If using data from this research analysis, tree could be felled by choosing sub-compartment.

• Journal of Forest and Environmental Science
• /
• 제40권1호
• /
• pp.24-34
• /
• 2024

Fire, being primarily a natural phenomenon, is impossible to control, although it is feasible to map the forest fire risk zone, minimizing the frequency of fires. The spread of a fire starting in any stand in a forest can be predicted, given the burning conditions. The natural cover of the land and the safety of the population may be threatened by the spread of forest fires; thus, the prevention of fire damage requires early discovery. Satellite data and geographic information system (GIS) can be used effectively to combine different forest-fire-causing factors for mapping the forest fire risk zone. This study mainly focuses on mapping forest fire risk in the Madikhola watershed. The primary causes of forest fires appear to be human negligence, uncontrolled fire in nearby forests and agricultural regions, and fire for pastoral purposes which were used to evaluate and assign risk values to the mapping process. The majority of fires, according to MODIS events, occurred from December to April, with March recording the highest occurrences. The Risk Zonation Map, which was prepared using LULC, Forest Type, Slope, Aspect, Elevation, Road Proximity, and Proximity to Water Bodies, showed that a High Fire Risk Zone comprised 29% of the Total Watershed Area, followed by a Moderate Risk Zone, covering 37% of the total area. The derived map products are helpful to local forest managers to minimize fire risks within the forests and take proper responses when fires break out. This study further recommends including the fuel factor and other fire-contributing factors to derive a higher resolution of the fire risk map.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.490-494
• /
• 2008

We simulated a forest fire which was occurred in Yangyang area on 2005 and compared a results between two different weather conditions(real weather condition and mean weather condition since 1968) using FARSITE, which is a forest fire spread simulator for preventing and predicting fire in USDA. And, we researched a problem in the transition for introducing, so we serve the basic method for prevention and attacking fire. In the result, severe weather condition on 2005 effected a forest fire behavior. The rate of spread under real weather condition was about 4 times faster than mean weather condition. Damaged area was about 10 time than mean weather condition. Therefore, Climate change will make a more sever fire season. As we will encounter to need for accurate prediction in near future, it will be necessary to predict a forest fire linked with future wether and fuel condition.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.321-324
• /
• 2008

Forest fire danger rate of thinning area was lower than that of non thinning area, because height rate of leewardside in burned stem of tree, damage rate of crown and mortality of tree in thinning area were 30.8%, 37% and 48.4% lower than that in non-thinning area, respectively. Intensity of forest fire varied depending upon topographical condition up slope, down slope, aspect, location as well as species, breast height diameter and forest tree density. Especially, a mountaintop area was burned down when forest fire was spread to up slope ridge of mountain.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.475-489
• /
• 2013

본 연구는 낙엽송과 백합나무 톱밥을 이용한 펠릿의 제조 과정에서 바인더로 일정량의 유채박, 커피부산물, 수피, 솔방울, 리그닌 분말을 첨가하여 바인더의 종류 및 첨가량이 내구성을 포함한 펠릿의 품질에 미치는 영향을 알아보기 위하여 수행하였다. 바인더와 함께 제조한 펠릿의 품질은 국립산림과학원에서 고시한 목재 펠릿 품질 규격 1등급 기준을 대부분 상회하였으며, 일부 과다한 양의 바인더를 첨가하여 제조한 펠릿에서만 높은 회분 함량으로 2~3등급 기준을 만족하는 것으로 조사되었다. 바인더 종류 및 첨가량에 따른 펠릿의 내구성은 리그닌, 유채박 그리고 커피부산물을 첨가하여 제조한 펠릿에서 우수하였으며, 백합나무 펠릿은 첨가량의 증가와 함께 내구성도 향상되었다. 한편 낙엽송 펠릿의 경우 첨가량의 증가에 따른 내구성 향상 효과는 크지 않았으며, 수피와 솔방울을 바인더로 사용하였을 때 첨가량의 증가와 함께 내구성이 감소하였다. 제조된 펠릿의 광학/전자현미경 관찰을 통하여 바인더의 종류에 따른 차이를 명확하게 확인할 수 없었으나, 첨가량에 따른 차이는 명확하게 관찰할 수 있었다. 결과를 종합하면, 바인더의 첨가는 목재 펠릿의 품질 향상에 대부분의 항목에서 기여하였으며, 특히 커피부산물을 바인더로 사용하여 제조한 펠릿의 경우 모든 품질에서 뚜렷한 향상을 확인할 수 있었다. 향후 저렴한 바인더의 안정적인 확보가 이루어진다면 바인더의 첨가로 인하여 연료적 품질이 향상된 목재 펠릿의 상용화가 가능할 것으로 확신한다.

• Journal of Forest and Environmental Science
• /
• 제34권4호
• /
• pp.352-358
• /
• 2018

This research paper investigates available options for implementing clean development mechanism (CDM) project in Sarawak state, Malaysia. To investigate economic feasibility, data was collected using survey and field research methods. Also, economic analysis was estimated using net present value (NPV), internal rate of return (IRR) and payback period (PBP) during the 30 years CDM: afforestation and reforestation periods. The result of economic analysis indicated that, the payback period was estimated at 9 years with 18 percent of internal rate of return (IRR). This study also highlighted that CDM biomass supply project have a lot of challenges due to the reduction and exclusion of bio-Solid Recovered Fuel (SRF), supply and demand scenario, and impact of restriction of illegal logging in Malaysia. This study results demonstrate the methodology and guideline for future CDM investment and projects.