• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.165-181
• /
• 1999

Treatment mechanics should be individualized to be suitable for each patient's personal teeth and anatomic environment to get a best treatment result with the least harmful effects to teeth and surrounding tissues. Especially, the change of biomechanical reaction associated with that of the centers of resistance of teeth should be considered when crown-to-root ratio changed due to problematic root resorption and/or periodontal disease during adult orthodontic treatment. At the present study, in order to investigate patterns of initial displacements of anterior teeth under certain orthodontic force when crown-to-root ratio changed in not only normal periodontal condition but also abnormal periodontal and/or teeth condition, the changes of the centers of resistance for maxillary and mandibular 6 anterior teeth as a segment were studied using the laser reflection technique, the lever & pulley force applicator and the photodetector with these quantified variables reducing alveolar bone 2mm by 2mm for each of maxillary 6 anterior teeth until the total amount of 8mm and root 2mm by 2mm for each of mandibular 6 anterior ones until the total amount of 6mm. The results were as follows: 1. Under unreduced condition, the center of resistance during initial displacement of maxillary 6 anterior teeth was located at the point of about $42.4\%$ apically from cemento-enamel junction(CEJ) of the averaged tooth of them and kept shifting to about $76.7\%$ with alveolar bone reduction. 2. The distance from the averaged alveolar crest level of maxillary 6 anterior teeth to the center of resistance for the averaged tooth of them kept decreasing with alveolar bone reduction, but the ratio to length of the averaged root embedded in the alveolar bone was stable at around $33\%$ regardless of that. 3. Under unreduced condition, the center of resistance during initial displacement of mandibular 6 anterior teeth was located at the Point of about $43\%$ apically from CEJ of the averaged tooth of them and this ratio kept increasing to about $54\%$ with root reduction. But the distance from CEJ to the center of resistance decreased from around 5.3mm to around 3.3mm, that is to say, the center of resistance kept shifting toward CEJ with the shortening of root length. 4. A unit reduction of alveolar bone had greater effects on the change of the centers of resistance than that of root did during initial Phase of each reduction. But both of them had similar effects at the middle region of whole length of the averaged root.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.267-274
• /
• 2005

This paper presents the fabrication of surface acoustic wave (SAW)-based pressure sensor for long-term stable mechanical compression force measurement. SAW pressure sensor has many attractive features for practical pressure measurement: no battery requirement, wireless pressure detection especially at hazardous environments, and easy other functionality integrations such as temperature, humidity, and RFID. A $41^{\circ}$ YX $LiNbO_3$ piezoelectric substrate was used because of its high SAW propagation velocity and large values of electromechanical coupling factors $K^2$. A silicon substrate with $\~200{\mu}m$ deep cavity was bonded to the diaphragm with epoxy, in which gold was covered all over the inner cavity in order to confine electromagnetic energy inside the sensor, and provide good isolation of the device from its environment. The reflection coefficient $S_{11}$ was measured using network analyzer. High S/N ratio, sharp reflected peaks, and clear separation between the peaks were observed. As a mechanical compression force was applied to the diaphragm from top with extremely sharp object, the diaphragm was bended, resulting in the phase shifts of the reflected peaks. The phase shifts were modulated depending on the amount of applied mechanical compression force. The measured $S_{11}$ results showed a good agreement with simulated results obtained from equivalent admittance circuit modeling.

• Korean Journal of Comparative Education
• /
• v.26 no.3
• /
• pp.189-210
• /
• 2016

In recent times, rapid social change has caused an unavoidable need for change in general education. The purpose of this paper is to review a change in the nature of general education through reviewing the Harvard Reports. To this end, we compare and analyze a series of Harvard Reports on General Education. The Harvard Report on General Education has been published in three separate reports: "General Education in a Free Society"(1945), "Report on Core Curriculum"(1978), "Report of the Task Force on General Education"(2007). Firstly, "General Education in a Free Society" enlarges the subject of general education in public and aims to achieve universal general education. Secondly, "Report on Core Curriculum" contributes to the common intellectual foundation. It not only enriches the personal life but also enable to have a conversation related to problems of mankind. Thirdly, "Report of the Task Force on General Education" supports the idea of liberal education as well as problem-solving skills in real life. For instance, general education should concern educating global citizen. A series of the Harvard Report on General Education have shown that today general education should preserve the nature of liberal education as well as reflection of the social context.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.4
• /
• pp.287-295
• /
• 2012

Hydrodynamic performance of a movable submerged breakwater was analyzed using energy dissipation model. Based on two-dimensional boundary element method the equation of motion including a viscous dissipation term proportional to velocity squared was solved by Newton-Raphson method. Energy dissipation coefficients as well as reflection and transmission coefficients of a submerged flat plate were calculated with various plate lengths and thickness. Both real and imaginary components of body displacement and forces were used to solve the motion of breakwater accurately. The effect of the magnitude of dissipation coefficient on the body displacement was evaluated. The results from the potential theory with no dissipation term were found to be an overestimate in resonance frequency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.387-392
• /
• 2007

The paper presents control performance of a magnetorheological (MR) fluid-based haptic knob which is applicable to invehicle comfort functions. As a first step, MR fluid-based haptic knob is devised to be capable of both rotary and push motions with a single device. Under consideration of spatial limitation, design parameters are optimally determined to minimize a reciprocal of control torque using finite element analysis. The proposed haptic knob is then manufactured and its fielddependent torque is experimentally evaluated. Subsequently, in-vehicle comfort functions are constructed in virtual environment and make them communicate with the haptic knob. Control performances such as reflection force are experimentally evaluated via simple feed-forward control strategy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.307-314
• /
• 2008

The paper presents control performance of a magnetorheological(MR) fluid-based haptic knob which is applicable to in-vehicle comfort functions. As a first step, MR fluid-based haptic knob is devised to be capable of both rotary and push motions with a single device. Under consideration of spatial limitation, design parameters are optimally determined to minimize a reciprocal of control torque using finite element analysis. The proposed haptic knob is then manufactured and its field-dependent torque is experimentally evaluated. Subsequently, in-vehicle comfort functions are constructed in virtual environment and make them communicate with the haptic knob. Control performances such as reflection force are experimentally evaluated via simple feed-forward control strategy.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.495-500
• /
• 2003

UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.309-309
• /
• 2013

기존의 CIGS 태양전지는 window 층(GZO/ZnO/CdS)에서의 투과 및 반사 손실을 줄이기 위하여 MgF2를 이용한 AR (Anti Reflection) 층을 적용하여 cell을 제작하고 있다. 현재 단위공정을 줄이고 시간적 경제적 비용을 절감하기위해 무반사 코팅층 없이 표면의 구조를 변화 시키거나 CIGS 태양전지의 window 층만으로 cell 구조에 적용하는 연구가 많이 진행되고 있다. 본 연구는 AR층과 window층 역할을 동시에 만족하는 일체화된 window층 두께를 설계하고 성장한 후, window층의 열처리 전후의 구조적, 광학적 및 전기적 특성을 비교 평가하였다. Macleod simulation을 이용하여 window 층을 설계한 후, RF magnetron sputtering법을 이용하여 상온성장 시킨 후 N2 분위기에서 후열처리 조건에 따른 박막의 구조적, 전기적 및 광학적 특성을 변화를 X-ray diffractometer, Field emission-scanning electron microscope, Atomic force microscopy, 4 point probe, Hall 측정, 투과도 및 반사도등으로 비교 평가하였다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.71-74
• /
• 1998

$Er^{3+}$ doped $NdF_{3}$ single crystalline thin films with smooth, microcrack-free, and high-crystalline quality were grown on $CaF_{2}(111)$ substrate at $500^{\circ}C$by molecular beem epitaxy(MBE). The relation-ship between subcell and supercell showing the reconstructed $3^{1/2} \times 3^{1/2}$ structure was studied by reflection high-energy electron diffraction(RHEED) investigation. The film surface and the growth mode were examined in studied by RHEED patterns and atomic force microscope(AFM) images ex situ. The crystallinity of film and the lattice mismatch between $NdF_{3}Er}^{3+}(0002)$ film and $CaF_{2}(111)$ substrate depending in the $Er^{3+}$ concentration were investigated by X-ray rocking curve analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2059-2071
• /
• 1992

The characteristics of wave propagation along a catenary in rail electrification system depend on the boundary impedance, characteristic impedance of catenary, and the contact force of pantograph moving along the catenary. In this study, the wave propagation along catenary is studied with arbitrary boundary conditions and characteristic impedance of catenary. The reflection and transmission of waves through the boundaries of catenary and the propagation of waves along the catenary are found to be dependent on the wave length.