• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.11-20
• /
• 2003

The purpose of the present study is to evaluate the stress distribution on the length and diameter of the miniscrew and cortical bone width. Three dimensional finite element models were made of diameter 1.2mm, 1.6mm, 2.0mm and length 6.0mm, 8.0mm, 10.0mm, 12.0mm and cortical bone width 1.0mm. Also, another three dimensional finite element models were made of diameter 1.2mm, 1.6mm, 2.0mm and length 8.0mm and cortical bone width 1.0mm, 1.5mm, 2.0mm, 2.5mm. Two-hundred grams horizontal force were applied on the center of the miniscrew head and at that stress distribution and its magnitude had been analyzed by ANSYS, which is three dimensional finite element analysis program. The obtained results were as follows : 1. The comparison of the maximum von-Mises stress in the miniscrew showed that as the diameter increases from 1.2mm to 2.0mm stress has been decreased, while on the same diameter stress was not changed regardless of the length change. 2. The comparison of the maximum von-Mises stress in the cortical and cancellous bone showed that as the diameter increases from 1.2mm to 2.0mm stress has been decreased, while on the same diameter stress was not changed regardless of the length change. 3. In the analysis of the stress distribution in the cortical and cancellous bone, the most of the stress had been absorbed in the cortical bone, and did not transmitted much to the cancellous bone. 4. In the analysis of the maximum von-Mises stress according to the cortical bone width, the same diameter of the miniscrew showed a constant stress value regardless of the cortical bone width change. The above results suggest that the maintenance of the miniscrew is more reliable on diameter than length of the miniscrew.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.391-399
• /
• 1997

Rapid palatal expansion(RPE) is a method of inducing the new bone formation in the palate by separation of the midpalatal suture, which can be done conveniently by placing heavy force across the maxillary dental arch. This experiment was undertaken to examine the histologic changes after RPE and during retention period. Four young adult dogs(a control dog, three experimental dogs) aged 4 to 6 months old were used for this experiment. Expansion screw($Hyrax^{\circledR}$, Dentarum Inc.) was delevered to the palate and fumed 180 degrees every morning and evening for 8 days, giving a total expansion of 7.2mm. A control dog was sacrified at the starting point of this study without any treatment and three experimental dogs were sacrified after RPE, 14-day retention, and 28-day retention in each. Thereafter, those samples were observed with hematoxylin-eosin(H-E) stain, ground section(Villanueva stain), alkaline phosphatase(ALP) stain, tartrate-resistant acid phosphatase(TRA) stain. The results were as followings: 1. After RPE, collagen fiber bundles were stretched along the midpalatal suture and few osteoblasts were flattened-inactive state and also, a little osteoid tissues was observed. Few multinucleated osteoclasts which had TRAP-positive activity in their cytoplasm were seen in horizontal section, whereas a few osteoclasts were seen in frontal section, especially in the nasal floor side of palatal bone. 2. After 14-day retention, collagen fiber bundles were stretched along the midpalatal suture and few osteoblasts which had ALP-positive activity in their cytoplasm were seen. Few multinucleated osteoclasts which had TRAP-positive activity in their cytoplasm were seen in horizontal section, whereas a few osteoclasts were seen in frontal section, especially in the nasal floor side of palatal bone. 3. After 28-day retention, collagen fiber bundles were arranged like those of control dog and osteoblasts which showed a lot of immature bone formation were cuboidal shape and exhibited ALP-positive activity in their cytoplasm. Few multinucleated osteoclasts which had TRAP-positive activity in their cytoplasm were seen in horizontal section, whereas a few osteoclasts were seen in frontal section, especially in the nasal floor side of palatal bone. According to the above results, the new bone formation after rapid palatal expansion was examined after 14-day retention and significantly increased after 28-day retention.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.205-214
• /
• 2000

Recently, the magnetic force has been considered as a method for a more efficient tooth movement. The purpose of this study was to evaluate the effects of different static magnetic fields of Nd-Fe-B magnet on MC3T3-E1 cells by measuring the alkaline phosphatase activity and observing the amount of stained alkaline phosphatase. For measuring of alkaline phosphatase activity, MC3T3-E1 cells were seeded in first and third row of 12 well culture plates. And Nd-Fe-B magnets were positioned under the first column of first and third row to apply different static magnetic fields(first column:100mT ; second column:4.6mT ; third column:0.5mT ; forth column:0.0mT) to the cells for 7, 13, 19, and 25 days. For staining of alkaline phosphatase, MC3T3-E1 cells were seeded in 100mm culture plates. And Nd-Fe-B magnets were positioned under the corner of plates to apply different static magnetic fields(magnet side:100mT : the opposite side:0.5mT) to the cells for 7, 13, 19, and 25 days. The results were as follows : 1. ALP activity was increased until day 19 in biochemical determination as well as in histochemical staining, 2. The application of higher magnetic field(100mT) suppressed ALP activity at day 13, 19, 25. On the contrary, the application of the lower magnetic field(4.6mT, 0.5mT) significantly enhanced the ALP activity. 3. Consistent with enzyme assay, histochemical staining of ALP also demonstrated that higher magnetic field(100mT) suppressed ALP activity, lower one(0.5mT) enhanced.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.203-215
• /
• 2007

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.2
• /
• pp.97-136
• /
• 2004

The Northeast Asian air cargo market has expanded tremendously as a result of the opening up of the Chinese market. The importance of the Asia-Pacific region in the global air transport has also increased. The exchange of human and material resources, services, and information in Northeast Asia, which is expected to increase in the near future, requires that the airlines operating within this region adopt a more liberalized approach. This paper introduced alternatives which can be applied to the Northeast Asian airlines industry so as to bring about the integration of regional air transport: First, this paper found a need for individual Northeast Asian nations to alter their policies towards the airlines industry. Second, each country should further liberalize their respective domestic air transport. Third, there is a need for freer air service agreements to be signed between the nations of Northeast Asia. Fourth, the strategic alliances between the airlines operating in Northeast Asia should be further strengthened. Fifth, this liberalization process should be carried out in an incremental manner, beginning with more competitive airports and routes, or with less-in-demand routes. Sixth, there is a need for a shuttle system to be put into place between the main airports in China, Korea, and Japan. Seventh, these three nations jointly develop aviation safety and security systems that are in accordance with international standards. Eighth, the liberalization process of the aviation industry should be undertaken in conjunction with other related fields. Ninth, organizations linking together civil aviation organization in the Asia-Pacific area should be formed, as should each government linking together. By doing so, these countries will be able to establish regular venues through which to exchange opinions on the integration and liberalization of the air cargo market so as to induce the gradual liberalization of the actual market. The liberalization of the air transport in Northeast Asia will prove to be a daunting task in the short term. However, if the Chinese airlines continue to exhibit continuous growth and Japanese airlines are able to complete their move towards a low-cost structure, this process could be completed earlier than expected. Over the last twenty five years the air transport has undergone tremendous changes. The most important factor behind these changes has been the increased liberalization of the market. As a result, rates have decreased while demand has increased. This has resulted in turning the air transport industry, which was long perceived as an industry in decline, into a high-growth industry. The only method of increasing regional exchanges in the air transport is to pursue further liberalization. The country which implements this liberalization process at the earliest date may very well emerge as a leading force within the air transport industry.

• Journal of the Korean Society of School Health
• /
• v.14 no.1
• /
• pp.131-143
• /
• 2001

The primary aim of this dissertation is to contribute to the improvement of methods in physical examination by providing quality information for the current school system and advice for improving status. Present status, controversial points and possible remedies in physical examination were analyzed on a frequency and percentage basis. An $x^2$-test was used to verify the statistics between the results from the examination and each variable. In case of multiple categories of variables, an $x^2$ cs was adopted. Chronological data as well as both total and sampling physical examination data verified the statistics using an $x^2$-test. This thesis is based both on the data from middle school health care specialists in Gyunggi Province and on the analysis of physical examinations reported from local schools to the municipal education agency from 1997 to 1999. The results of the study are as follows: First, according to the survey, only 29.0% of the total schools had their school doctors examine all the students while most of the educational institutions failed to implement the whole process of physical examination on the list. It also turned out that the more students the schools have, the lower the rate of implementation of physical examination by school doctors(p=0.014). Second, the average time a school doctor spends for checkup turned out to be approximately 1.7 minutes per student This means that the quality of the physical examination is not guaranteed in the process. Third, 47.7% of those surveryed say that a dental examination was performed, each taking 21.24 seconds on average. In addition, it shows that some 31.5% wanted to have a task force team for dental checkups at the local health center. Given the fact that dental caries among students is progressively on the rise, the dental health centers that are now set up in some elementary schools should be expanded to cover the whole educational institution in order to raise awareness of the importance of dental care. Fourth, 48.5% of those surveyed say that a comprehensive physical examination should be adopted to promote the health of high schoolers. Since it takes a lot of public funds to implement a comprehensive method, it is essential to make sure that in-depth studies should be based on the frequency and methods of physical examination. Fifth, regarding such diseases among 3rd year middle school students in 1999, statistics shows that there was a slight difference in the prevalence rate of color blindness, and allergic diseases for male students ; and color blindness, hearing disturbance and allergic disease for female students. For those items, however, it is too little to say that there is a significant difference and accordingly it is assumed to be a problem of the measuring process. Sixth, the result of analysis on the sample physical examination and the total physical examination of the year 1999 shows as follows: For male students in the 3rd year of middle school, a slight difference appeared to those students in 11 items including eye problems and eye disease, otitis media, tonsillar hypertrophy, spinal shape, respiratory urinary allergic disease and other abnormal diseases(p<0.05). Particularly, the prevalence rate between students with and without disease was shown to be two times more in the following: eye problems, otitis media, tonsill hypertrophy, allergic diseases, etc. For female students in the 3rd year, prevalence rate showed little difference in 14 items(p<0.05). For items including eye problem, otitis media, tonsill hypertrophy, allergic disease, etc. it was shown that the rate was two times more between students with and without diseases. Physical examinations under the current school system are not producing any fundamental results for the health of the students. Methods and results are not trustworthy. Accordingly, a drastic overhaul of the current practices is needed in frequency, methods and items on the list in order to promote the health of the students. Cost-benefit studies as well as political considerations to ensure the development of efficient methods for physical examination are urgently needed at this moment.

• Journal of Korean Academy of Nursing
• /
• v.23 no.1
• /
• pp.118-129
• /
• 1993

In order to approach the nursing care of clients who are using oriental medicine and to understand the perception of the client who uses oriental medicine practices and the need to develop a model of nursing related to oriental medicine it is important to examine the major nursing concepts as they are found in oriental medicine and as they are differently defined according to the basic thought, theory and philosophical perspectives between East and West. Oriental medicine developed based on Sung Confucianism the teachings of Chut-zu, especially Tai-Chi-Tu Shuo and energy thought which are similar to traditional Korean Sasang Constitutional medicine. The basic theory on which oriental medicine is build is the theory of the five elements of Yin / Eum-Yang Theory(cosmic dual forces) and Meridian Theory. The most important attribute of Yin Yang is the concept of duality, confrontation and dependence, within Yin Yang but which do not exist separately. That is, the universe is a vast, indivisible entity within which all things exist in harmonious interdependence and balance. Harmony is achieved only when the two primorial forces, Yin and Yang, are brought into perfect balance. Each is contained within the other and there is a continuing interchange between the two. This also applies to the human body including human health which is defined as balanced harmony. The most universal connection of Yin and Yang is found in the universe where the five elements of life, fire, water, earth, wood and metal can be explained as having either Yin or Yang and therefore being in a state of connectedness but systematically circulating between the two, that is essentalilly one (the control of the unified ) or as coexistant poles of individual wholes (the pluralism of Yin Yang Theory) so that it is all unified(balanced) in the Great Absoulte. Human beings also maintain a balance of Yin and Yang in the five elements and this relationship is very important in approaching ·oriental medicine, The meridians are the channels in the body through which the life force flow throughout the body. In oriental medicine the meridians are seen as the railroad, the acupuncture points on the meridians as the stations and energy as the train. In the normal healthy organism, all are maintained in balance and in a contiuous circulation of energy. illness is the result of the energy flow becoming disarranged. Although practitioners of oriental medicine approach the client differently than do practitioners of Western medicine and their method of examining the patient is different, the basic objectives of the examination are the same for practitioners of both types of medicine. Therefore if each could be used to supplement the defiencies in the other and achieve a harmonious cooperation between the two, a higher level of care which is culturally appropriate to korean culture could be achieved. The traditional korean concept of health is a naturalistic view which emphasizes being in harmony with nature. Any manifestation of disease is considered a sign that the body is in a state of disequilibrium and is thus no longer in harmony with the universe. The wholistic view of the world held by practitioners of oriental medicine can be used by nursing in the development of a world view of nursing in which the human being is seen within the macrocosm as part of the natural phenomenon of the universe and but also as a microcosm of the universe, a universe which is a vast and indivisible entity within which all things exist in harmonious interdependence and balance. Interaction between human beings and their environment and the relationship of this interaction to health are concepts that are also found in nursing. Nursing views human brings, not as an accumulation of separate cells and organs but, as unified wholes interacted in very close relationship nth their environment. Nursing also maintains a view of human beings in which emphasis is placed on the role of the mind in explaining the concepts of harmony and balance in health. Although there are differences between oriental medicine and nursing in approaches to clients, the basic point of view and philosophy have many fundamental similarites. An understanding of the basic thought and philosophy of oriental medicine if applied to nursing, would allow for the development, not only of nursing related to oriental medicine, but of a nursing theory appropriate to the korean context.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.197-205
• /
• 2011

Purpose: This study was to evaluate the accuracy of the implant torque controller used in dental clinics and to investigate whether it was applied appropriately. Materials and methods: Fifty dentists who work in dental clinics were enrolled in this study. Dental (implant) practice career, experience frequency of implant screw loosening and fracture, education of implant torque controller application and infection control methods were included in the survey. 25 Ncm and 30 Ncm of the tightening torque applied to the implant screw were measured by 50 clinicians. After measuring the torque value by using the torque controller, the torque mean according to where education about the implant torque controller was received was analyzed with independent t-test at the significance level of 0.05. Results: The torque controller used in private dental clinics showed 4.78% error ratio. When 50 dentists applied 25 Ncm to the implant screw was $29.0{\pm}8.4$ Ncm, and that in 30 Ncm was $34.3{\pm}9.1$ Ncm. Statistical significance was found between the group that was educated about implant torque application and the group that was not educated. Conclusion: During the prosthodontic treatment with implant, there was difference between actual applied torsion force and the amount torque controller indicated. Clinicians have to not only be well-informed about the accurate usage method of the torque controller, but also keep and manage the torque controller so as to maintain continuous and accurate torque values. Through this, it is considered to achieve clinical results to minimize problems of screw loosening or fracture.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.21-29
• /
• 1999

This study was carried out to determine the promising method for the production of mother bulbs using garlic bulbs at the experimental field of Ange high school, Eusung in Korea from 1996 to 1998. The bulbs and bulbils were taken from a local cultivar 'Eusung' garlic. The growth of bulbil and yield potential were compared with different harvesting times and cultivation methods of bulbil. The harvesting time of bulbils which were capable of producing the mother bulbs was ranged from 15 days to 30 days after the emergence of flower stalks. The best results based on the yield and number of bulbs were obtained from the bulbils sampled at the just before garlic harvesting, 30 days after flower-stalk emergence. The mulching with transparent polyethylene(PE) film in bulbil cultivation was more effective for the plant growth and bulb formation than that with black PE film. The PE mulching from 30 days after seeding of bulbils to 30 days (late-April) before bulb harvesting was the moot effective for the increase of bulb yield. In the cultivation of garlic bulbils, application of lime (150 kg/10a) and compost (3,000 kg/10a) without any chemical fertilizers produced more bulbs in comparison with the standard level of fertilizer (N - $P_2O_5$ - $K_2O$ - compost - lime = 24.8 - 8.0 - 19.2 - 3,000 - 150 kg/10a). It was determined that the involucre seeding and assemble seeding of bulbils was effective and labour-saving methods for the production of mother bulbs from garlic bulbils. Input of labour force for the involucre seeding was decreased up to 61% as compared with the conventional drill seeding of bulbils. Mean yield from the cultivation of bulbil-derived single cloves was remarkably increased up to 95% in comparison with that of the common cloves. The larger size of single clove produced more yields, and the optimum planting density of single clove was $20{\times}10cm$. The cloves differentiated directly from bulbil showed to have higher yield potential than that from common cloves.