• Structural Engineering and Mechanics
• /
• v.1 no.1
• /
• pp.119-135
• /
• 1993

The paper presents a generalized optimal active control algorithm for earthquake-resistant structures. The study included the weighting matrix configuration, stability, and time-delays for achieving control effectiveness and optimum solution. The sensitivity of various time-delays in the optimal solution is investigated for which the stability regions are determined. A simplified method for reducing the influence of time-delay on dynamic response is proposed. Numerical examples illustrate that the proposed optimal control algorithm is advantageous over others currently in vogue. Its feedback control law is independent of the time increment, and its weighting matrix can be flexibly selected and adjusted at any time during the operation of the control system. The examples also show that the weighting matrix based on pole placement approach is superior to other weighting matrix configurations for its self-adjustable control effectiveness. Using the time-delay correction method can significantly reduce the influence of time-delays on both structural response and required control force.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.91-95
• /
• 2009

We investigated the characteristics of a capacitive nano-accelerometer based on carbon nanotube by means of classical molecular dynamics simulations. The position of the telescoping nanotube was controlled by the externally applied force and the feedback sensing was achieved from the capacitance change. Considering energy dissipation, the oscillation features of the nano-accelerometers were similar, regardless of their initial displacements. The capacitance variations, which were almost linearly proportional to the applied acceleration, were monitored within an error tolerance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1662-1667
• /
• 2005

In this paper, analysis, design, control and prototype construction of a wearable wire-driven haptic interface called HapticPen is discussed. This device can be considered as a wire driven parallel mechanism which three wires are attached to a pen-tip. Wire tensions are provided utilizing three DC servo motors which are attached to a solid frame on the user's body. This device is designed as input as well as output device for a wearable PC. User can write letters or figures on a virtual plate in space. Pen-tip trajectory in space is calculated using motor encoders and force feedback resulting from contact between pen and virtual plate is provided for constraining the pen-tip motion onto the virtual plane that can be easily setup by arbitrary non-collinear three points in space. In this paper kinematic model, workspace analysis, application analysis, control and prototype construction of this device are presented. Preliminary experiments on handwriting in space show feasibility of the proposed device in wearable environments.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.212-219
• /
• 2004

This paper presents the visualization method of the KAIST interactive bicycle simulator. The simulator consists of two bicycles of 6 DOF and 4 DOF platforms, force feedback handlebars and pedal resistance systems to generate motion feelings; a real-time visual simulator, a HMD and a beam projection system; and a 3D sound system. The system has an integrating control network with the server-client network structure for multiple simulators. The visual simulator generates dynamic images in real-time while communicating with other modules of the simulator. The operator of the simulator can have realistic visual experience of riding on a velodrome or through the KAIST campus, while being able to watch the other bicycle with an avatar.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.244-247
• /
• 2001

진동을 감소시키는 방법에는 최적의 설계 변수를 선정하는 수동 제어 방법과 피드백 루프(Feedback loop)를 이용하는 능동제어 방법 두 가지가 있다. 이 중 능동제어에 대한 연구가 최근에 활발히 진행되고 있다. 본 연구에서는 능동제어를 위한 진동시스템의 동적해석과 시스템의 모델링에 대해 연구하고자 한다. 진동체로는 외팔보를 선택하였으며 진동체의 진동을 제어하는 장치로는 제어코일과 베이스코일로 구성된 Push-Pull 타입의 전자석 제어회로를 직접 제작하였고 시스템을 모델링하여 전달함수를 구하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.197-200
• /
• 2001

본 논문에서는 특정한 형태의 제약 즉, 매니퓰레이터의 자유도와 주어진 제약조건의 차원의 차이가 1이며, 매니퓰레이터의 동역학을 작업영역에서의 축차모델로 나타내었을 때, 변환행렬이 단위행렬로 나타나는 제약을 가지는 불확실한 로봇 매니퓰레이터의 위치/힘 추종을 위한 적응제어기를 제안한다. 제안된 제어기는 비선형 좌표변환을 통하여 얻어진 로봇의 축차모델(reduced-order model)을 이용하여 위치제어와 힘제어의 문제를 분리한다. 특히, 비선형 동적 필터를 이용하여 위치의 측정만을 필요로 하며, 적응제어 기법을 통하여 전역 점근적인 안정성을 보장한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1171-1172
• /
• 2008

In this paper, we investigate the issues on the design and implementation of tele-operation system based on the haptic interface. Here, the 3-DOF haptic device and the X-Y-Z stage are employed as master controller and slave system respectively. For this master-slave system, the force feedback algorithm, the modeling of virtual environments and the control method of X-Y-Z stage are presented. In this paper, internet network is used for data communication between master and slave.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.169.1-169
• /
• 2001

In general, for high performance pressure control system, hydraulic system with electo hydraulic servo valve controls flow rate, it contains many nonlinear term like square-root and change of bulk modulus by flow rate. But, DDV(Direct Drive Valve) contains pressure control loop itself, then it can eliminate nonlinearity and achieve linearity for hydraulic system. In this paper, parameter identification method which uses input and ouput data is applied to obtain DDV's mathematical model and parameter assuming that dynamic characteristic of DDV is first order system. Then, the state feedback controller was designed to implement the force control of hydraulic system , and the control performance was evaluated.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.282-285
• /
• 2004

The main purpose of this study is the vibration suppression of rotating composite blade containing distributed piezoelectric sensors and actuators. The blade is modeled by thin-walled, single cell composite beam including the warping function, centrifugal force, Coriolis acceleration and piezoelectric effect. Further, the numerical study is performed m ing finite element method. The vibration of composite rotor is suppressed by piezocomposite actuators and PVDF sensors that are embedded between composite layers. A velocity feedback control algorithm coupling the direct and converse piezoelectric effect is used to actively control the' dynamic response of an integrated structure through a closed control loop. Responses of the rotating blade are investigated. Newmark time integration method is used to calculate the time response of the model. In the numerical simulation, the effect of parameters such as rotating speed, fiber orientation of the blade and size of actuators are studied in detail.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.7
• /
• pp.1605-1617
• /
• 1994

Air-spring is widely used in vibration isolation to reduce the table vibration. When a disturbance is applied to a table, however, it starts virbrating with a low frequency, but has a large displacement due to the reacting force of air-spring. In this study, to solve the table vibration problem, an active vibration control device based on state feedback control using air-spring and proportional control valves was designed. This device can suppress the displacement of the isolation table within allowable range, even any kind of disturbances are applied to the table. Firstly, theoretical analysis of an air-spring isolator was done. Secondly, characteristics of the isolator was investigated via computer simulation and experiment. Finally, active control of air-spring isolator was tested using optimal(LQG) and fuzzy control algorithms was performed to show the effectiveness of the control schems.