• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.325-331
• /
• 1992

By using the general theoretical framework proposed recently for treating the fluorescence quenching kinetics, we investigate the effect of light pulse intensity on the decay of fluorescence which follows excitation of fluorophors by the light pulse of very short but finite duration. It is seen that conventional theory breaks down when the exciting light pulse has a pulse width comparable to the fluorescent lifetime and its intensity is very high. We also find that even when the light intensity is not too high, conventional theory may fail in either of the following cases: (i) when the quencher concentration is high, (ii) when there is an attractive potential of mean force between the fluorophor and quencher, or (iii) when the energy transfer from the fluorophor to the quencher may also occur at a distance, e.g., via dipole-dipole interaction. The validity of the predictions of the present theory may thus be tested by fluorescence quenching experiments performed under such situations.

• 한국운동역학회지
• /
• 제18권3호
• /
• pp.71-82
• /
• 2008

본 연구의 목적은 $20^{\circ}$ 경사로에 서 앞 뒤 보행 동작 시 지면반력 형태를 비교 분석하고자 한다. 본 연구를 위해서 두 대의 지면 반력기를 통해 전 후, 좌 우, 수직 지면반력값, 최대값, 최소값, 평균값 압력 중심 변위, 부하율과 감소율을 측정하였다. BD보행 시 RTO 시점에서 수직 지면반력값이 FU 보행에 비해 유의하게 높은 수치를 보인 반면, $RHC_2$ 시점에서는 더 낮은 수치를 보였다. 이는 보행 동작의 차이와 보행 시 발목과 무릎의 위치 변화, 무게 중심의 변화가 지면 반력의 형태에 직접적인 영향을 미치는 것으로 판단되어진다. 전 후 압력중심변위는 하향 보행 시 상향 보행에 비해 낮은 변화를 보였는데 이는 하향 시 생기는 불안정성을 상쇄하기 위해 더 강한 제동력이 발생되어 진 것으로 사료되어 진다. BD보행 시 부하율이 다른 보행에 비해 낮은 것을 알 수 있는데 이러한 결과를 통해 등산로에서 후방 보행 동작이 하지 근골격계에 지속적인 스트레스를 감소시켜 상해를 예방할 수 있는 방법으로 제시될 수 있을 것이다.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.550-558
• /
• 2019

The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.191-198
• /
• 2015

Objective : The purpose of this study was to conduct biomechanical analysis of varying backpack loads on the lower limb movements during downhill walking over $-20^{\circ}$ ramp. Method : Thirteen male university students (age: $23.5{\pm}2.1yrs$, height: $175.7{\pm}4.6cm$, weight: $651.9{\pm}55.5N$) who have no musculoskeletal disorder were recruited as the subjects. Each subject walked over $20^{\circ}$ ramp with four different backpack weights (0%, 10%, 20% and 30% of body weight) in random order at a speed of $1.0{\pm}0.1m/s$. Five digital camcorders and two force plates were used to obtain 3-d data and kinetics of the lower extremity. For each trial being analyzed, five critical instants were identified from the video recordings. Ground reaction force, loading rate, decay rate, and resultant joint moment of the ankle and the knee were determined by the inverse dynamics analysis. For each dependent variable, one-way ANOVA with repeated measures was used to determine whether there were significant differences among four different backpack weight conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results : The results of this study showed that the medio-lateral GRFs at RHC in 20% and 30% body weight were significantly greater than the corresponding value in 0% of body weight. A consistent increase in the vertical GRFs as backpack loads increased was observed. The valgus joint movement of the knee at RTO in 30% body weight was significantly greater than the corresponding values in 0% and 10% body weight. The increased valgus moment of 30% body weight observed in this phase was associated with decelerating and stabilizing effects on the knee joint. The results also showed that the extension and valgus joint moments of the knee were systematically affected by the backpack load during downhill walking. Conclusion : Since downhill walking while carrying heavy external loads in a backpack may lead to excessive knee joint moment, damage can occur to the joint structures such as joint capsule and ligaments. Therefore, excessive repetitions of downhill walking should be avoided if the lower extremity is subjected to abnormally high levels of load over an extended period of time.

• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.19-31
• /
• 1994

기사용 핵연료 저장조에 대한 열수력 해석과 관련된 인자들이 열수력 해석에 미치는 영향에 대한 분석을 수행하였다. 기사용 핵연료에서 발생하는 붕괴열(decay heat)을 제거하기 위해 일어나는 자연 순환(natural circulation)현상을 모사하기 위해 단순화된 유동망(simplified flow network)해석 모델을 사용하였다. 기사용 핵연료 저장조의 각 셀에 저장되는 연료 집합체에서 발생하는 붕괴열을 제거하기 위해 흐르는 유량의 압력 손실량이 자연순환을 일으키는 밀도차이에 의해 생성되는 구동력(driving force)과 평형을 이루는 관계를 이용하여 지배 방정식을 유도하였다. 그러나 유량, 저항 계수, 붕괴열, 밀도 등의 변수들이 서로 종속 관계를 갖기 때문에 반복 계산을 통해 해를 얻게 된다. 본 해석을 적용한 영광 3, 4호기의 경우, 12채널을 고려하였고 사용되는 입력 (저항 계수, 붕괴열)을 보수적으로 결정하였다. 본 연구를 통해 영광 3, 4호기 기사용 핵연료 저장조의 열수력 특성을 구하였다. 또한 유동로를 따라 형성되는 유동 저항중에 기하학적 요인에 의한 압력 손실은, 기사용 핵연료 저장조의 경우 압력 용기내의 유동과 달리 천이 영역(transition region)이 존재하게 되므로 Reynolds수에 민감한 것을 알 수 있다. 간극 유동은 조밀화된 연료 집합체 (consolidated fuel assembly)가 아닌 경우 무시할 수 있었다.

• 대한토목학회논문집
• /
• 제26권5A호
• /
• pp.887-899
• /
• 2006

본 연구의 목적은 교량 거더 단면의 공기역학적 특성을 나타내는 기본 자료인 공기력계수와 플러터계수가 동적응답과 어떠한 상관관계를 가지는지를 규명하는데 있다. 이를 위해 세 단계의 단면모형실험이 수행되었다. 첫 번째 단계에서는 총 7개의 거더 단면 즉, 6개의 플레이트거더 단면과 1개의 박스거더 단면이 고려되었으며 거더 단면의 기하학적 형상, 영각, 바람의 방향 그리고 기류조건이 공기력계수인 항력계수, 양력계수 그리고 모멘트계수에 미치는 영향을 정적 단면모형실험을 통해 살펴보았다. 두 번째 단계에서는 동적실험을 통해 각 단면의 공기력계수와 동적응답의 상관성을 검증하였다. 마지막으로 2자유도하의 동적 단면모형실험을 통해 세 개의 거더 단면의 플러터계수를 산출하고 이를 동적실험결과와 비교하였다. 주어진 단면형상에 대한 비정상 공기력에 의해 변화되는 시스템의 감쇠와 강성을 가장 잘 반영하는 플러터계수는 초기변위-자유진동시스템을 이용하여 추출하였다. 이를 위해 등류조건에서 풍속별로 교량단면의 수직 및 비틀림 초기변위의 시간에 따른 진폭의 감쇠를 측정하였다. 본 연구에서 제시한 교량단면의 공기력계수와 플러터계수는 공탄석해석 및 버펫팅해석을 위한 기본 자료로 유용하게 쓰일 것으로 보인다.

• 한국식품저장유통학회지
• /
• 제8권2호
• /
• pp.131-139
• /
• 2001

Kiyomi tangor(Citus unshiu x sinensis) was stored at 3$\^{C}$ and 85% relative humidity, and the changes in firmness, pectin degrading enzymes activity and other physicochemical properties of citrus fruits during storage were investigated. Decay ratio and weight loss during 180 days’ storage were increased gradually to 13.0% and 12.9%, respectively. Firmness of fruits with 2 mm probe was decreased gradually from 808.7 g-force to 406.4 g-force, and moisture of peel and flesh were decreased from 76.5% to from 89.6% to 87.6% during storage, respectively. Exo-polygalacturonase activity of peel after 150 days’ storage were increased gradually to 558.09 units/100g. Pectin methylesterase activity of peel and flesh were increased from 14.7 units/g to 2.3 units/g, and from 9.4 units/ml to 2.7 units/ml at 150days’ storage, respectively. Endo-polygalacturonase activities were not changed notably during storage. Alcohol-insoluble solid(AIS) of peel was not changed notably. During storage of the fruits water soluble pectin(WSP) of peel and flesh were increased from 474.49 mg/100g to 614.29mg/100g, and from 66.91mg/100g to 92.74mg/100g as wet basis, respectively. Hexameta-phosphate soluble pectin(HMP) of peel were decreased from 405.5mg/100g to 270.43mg/100g, hydochloric acid soluble pectin(HSP) of peel was also decreased from 544.02mg/100g to 412.64mg/100g during storage. Total pectin substance(TPS) of peel and flesh were decreased from 1,424.01mg/100g to 1,297.36mg/100g, and from 165.51mg/100g to 171.54mg/100g, respectively. Composition ratio of pectin was in order of WSP > HSP > HMP.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3361-3366
• /
• 2011

New Y-type polyester (3) containing nitrophenylazoresorcinoxy groups as NLO chromophores, which are components of the polymer backbone, was prepared and characterized. Polyester 3 is soluble in common organic solvents such as N,N-dimethylformamide and acetone. It shows a thermal stability up to $240^{\circ}C$ in thermogravimetric analysis with glass-transition temperature ($T_g$) obtained from differential scanning calorimetry near $116^{\circ}C$. The second harmonic generation (SHG) coefficient ($d_{33}$) of poled polymer film at the 1064 nm fundamental wavelength is around $4.63{\times}10^{-9}$ esu. The dipole alignment exhibits a thermal stability even at $4^{\circ}C$ higher than $T_g$, and there is no SHG decay below $120^{\circ}C$ due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.123-128
• /
• 2013

The Advanced Power Reactor Plus(APR+), which is a GEN III+ reactor based on the APR1400, is being developed in Korea. In order to enhance the safety of the APR+, a passive auxiliary feedwater system(PAFS) has been adopted in the APR+. The PAFS replaces the conventional active auxiliary feedwater system(AFWS) by introducing a natural driving force mechanism while maintaining the system function of cooling the primary side and removing the decay heat. As the PAFS completely replaces the conventional AFWS, it is required to verify the cooling capacity of PAFS for the core damage frequency(CDF) evaluation. For this reason, this paper discusses the cooling performance of the PAFS during transient accidents. The test case and scenarios were picked from the result of the sensitivity analysis in APR+ Probabilistic Safety Assessment(PSA). The analysis was performed by the best estimate thermal-hydraulic code, RELAP5/.MOD3.3. This study shows that the plant maintains the stable state without the core damages under the given test scenarios. The results of PSA considering this analysis' results shows that the CDF values are decreased. The analysis results can be used for more realistic and accurate performance of a PSA.

• 한국농촌건축학회논문집
• /
• 제21권3호
• /
• pp.25-32
• /
• 2019

This study is to derive the types of displacement and damage that occur in wooden architecture cultural assets. Although the wooden architectural cultural assets are being repaired through continuous maintenance, secondary problems frequently occur. This is because the root cause of the problem has yet to be solved. The types of displacement and damage that occur in the wooden architecture cultural asset are classified into three parts: the foundation section, the gagu section, and the roof section. In turn, the three main factors that lead to displacement and damages are the structures' load impact, the durability deterioration, and the imbalance. Load impact is a phenomenon in which the member is subjected to a load that causes deformation or cracks. Durability decline is a natural phenomenon that reduces the performance of lumber as a result of check shake, termite damage, and decay. The imbalance is a condition in which the lumber is twisted and the force balance is lost, due to either drying shrinkage or displacement of the gagu section.