DOI QR코드

DOI QR Code

Design of a Pendulum-type Anti-rolling System for USSV and Verification Based on Roll Damping Coefficient

무인반잠수정의 진자식 횡동요 저감 장치 설계 및 감쇠계수 기반 검증

  • Jin, Woo-Seok (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Kim, Yong-Ho (Department of Mechatronics Engineering, Kyungnam University) ;
  • Jung, Jun-Ho (Department of Mechatronics Engineering, Kyungnam University) ;
  • Lee, Kwangkook (Department of Naval Architecture & Ocean System Engineering, Kyungnam University) ;
  • Kim, Dong-Hun (Department of Electrical Engineering, Kyungnam University)
  • 진우석 (부산대학교 조선해양공학과) ;
  • 김용호 (경남대학교 메카트로닉스공학과) ;
  • 정준호 (경남대학교 메카트로닉스공학과) ;
  • 이광국 (경남대학교 조선해양시스템공학과) ;
  • 김동헌 (경남대학교 전기공학과)
  • Received : 2019.04.03
  • Accepted : 2019.10.03
  • Published : 2019.12.20

Abstract

The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.

Keywords

References

  1. Amerongen, J. van, Klugt P. van der, & Nauta Lemke H. van, 1990. Rudder roll stabilization for ships, Automatica 26 (4), pp.679-690. https://doi.org/10.1016/0005-1098(90)90045-J
  2. Alarcin, F., & Gulez, K., 2007. Rudder roll stabilization for fishing vessel using neural network approach. Ocean Engineering. 34(13), pp.1811-1817. https://doi.org/10.1016/j.oceaneng.2007.03.001
  3. Alujevic, N., Catipovica, I., Malenicab, s., Senjanovica, I., Vladimira, N., 2019, Ship roll control and power absorption using a U-tube anti-roll tank, Ocean Engineering, 172, pp.857-870. https://doi.org/10.1016/j.oceaneng.2018.12.007
  4. Burger, W., Corbet, A., 1966. Ship Stabilizers: A Hand Book for Merchant Navy Officers, Pergamon.
  5. Chung, T. Y., et al., 2010, A study on conceptual design of anti-rolling devices for 250 TEU class mobile harbors. The Korean Society of Noise and Vibration Engineering, 20(7), pp.629-636. https://doi.org/10.5050/KSNVE.2010.20.7.629
  6. InvenSense Inc, 2014. MPU-9250 Product Specification, InvenSense Inc.
  7. Jeong, M.J., 2019. Simulation modeling and performance verification of motion characteristics for USSV's SILS. Master's Thesis. Kyungnam University.
  8. Kim, J.H. & Kim, S.Y., 2015. Development trends and industry status of unmanned ship technology. Korea Evaluation Institute of Industrial Technology, 15(3), pp.83-95.
  9. Kim, N.W., Kim, Y.J. & Ha, Y.R., 2015. Experimental study of the free roll decay test for the evaluation of roll damping coefficients. Journal of the Society of Naval Architects of Korea, 52(6), pp.460-470. https://doi.org/10.3744/SNAK.2015.52.6.460
  10. Lee, K., Jeong, M.J. & Kim, D.H., 2017. Software-In-the-loop based modeling and simulation of unmanned semi-submersible vehicle for performance verification of autonomous navigation, IOP Conference Series: Materials Science and Engineering, 280, 012042. https://doi.org/10.1088/1757-899X/280/1/012042
  11. Lihua, L., Peng, Z., Songtao, Z., & Jia, Y., 2019, Simulation analysis of fin stabilizers on turning circle control during ship turns, Ocean Engineering, 173, pp.174-182. https://doi.org/10.1016/j.oceaneng.2018.12.067
  12. Liu, W., et al., 2019, Bilge keel design for the traditional fishing boats of Indonesia's East Java. International Journal of Naval Architecture and Ocean Engineering, 11, pp.380-395. https://doi.org/10.1016/j.ijnaoe.2018.07.004
  13. Lee, K., Jeong, M.J. & Kim, D.H., 2019, Simulation modeling and performance verification of motion characteristics for USSV's SILS, Journal of Institute of Control, Robotics and Systems, 25(5), pp.388-397. https://doi.org/10.5302/J.ICROS.2019.19.0032
  14. Moon, S.J., Park, C.I., Jeong, J.A., Kim, B.I. & Yun H.K., 2004. A sea-trial test of a pendulum-type mass driving anti-rolling system for small ships. Korean Society for Noise and Vibration Engineering(KSNVE), 2004.5, pp.438-441.
  15. Moon, S.J., Kim, B.I., Lee, S.H., Ham, S.Y., Jeong, J.A., & Lee, K.J., 2004. An experimental study on mass driving anti-rolling system for ships. Korean Society for Noise and Vibration Engineering(KSNVE), 2004.11, pp.727-730.
  16. Moon, S.J., Jeong, J.A., Yoon, H.K., Lee, G.J. & Ann, S.P., 2005. An experimental study on mass driving anti-rolling system for ships. The Society of Naval Architects of Korea, 42(6), pp.666-672. https://doi.org/10.3744/SNAK.2005.42.6.666
  17. Netural Point, Inc., 2011. TECH SPECS - V120:Trio. [Online] (Updated 2011) Avaliable at: https://optitrack.com/products/v120-trio/specs.html [Accessed 18 July 2019].
  18. Sharif, M., Roberts, G., & Sutton, R., 1996. Final experimental results of full scale fin/rudder roll stabilisation sea trials, Control Engineering Practice, 4(3), pp.377-384. https://doi.org/10.1016/0967-0661(96)00015-9
  19. Shuzhe, C., Soon, H.G., Hong, E.Y, & Chitre, M.D. 2011. Modular modeling of autonomous underwater vehicle. OCEANS'11 MTS/IEEE KONA.