• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.197-204
• /
• 2004

In this study we presented kinematic and kinetic data of foot joints using approximated equations and partial plantar pressure during gait. The maximum angular displacements of each tarsometatarsal joint were found to range from 4$^{\circ}$to 7$^{\circ}$ and the maximum moments were from 200Nㆍcm to 1500Nㆍcm. It was relatively wide distribution. Foot kinematic data calculated from the approximated equations, which were represented by the correlation between moment and angular displacement, and the data from motion analysis were similar. We found that the movements of foot joint were mainly decided by the passive characteristics of the joint when ground reaction force acts. The method of kinematic and kinetic analysis using approximated equations which is presented in this study is considered useful to describe the movements of foot joints in gait simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1088-1092
• /
• 2002

The purpose of this investigation was to study the kinematics of joints between foot segments based on computer graphic-based model during the stance phase of walking. In the model, ail joints were assumed to act as monocentric, single degree of freedom hinge joints. The motion of foot was captured by a video collection system using four cameras. The model fitted in an individual subject was simulated with this motion data. The kinematic data of tarsometatarsal joints and metatarso-phalangeal joint were quantitatively similar to the previous data. Therefore, our method using the computer graphic-based model is considered useful.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.1
• /
• pp.64-67
• /
• 2013

Pigmented villonodular synovitis (PVNS) is a slowly, progressive, proliferative disorder of synovial tissue characterized by villous or nodular changes of synovial-lined joints, bursae, and tendon sheaths and most frequently affects the large joints, with the knee and hip. A few studies have been reported that occurred PVNS in small joint, but mainly in hands. It is a very rare condition that occurs in the small joints of the forefoot. We have experienced the case, which developed in small joint of the forefoot, and performed total synovectomy. After the operation, there was no recurrence. We report a case of PVNS in forefoot with a review of the literature.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.446-454
• /
• 2011

In terms of the anatomy and mechanics of the human foot, a flexible robot foot with toes and heel joints is designed for a bipedal walking robot. We suggest three design considerations in determining foot design parameters which are critical for walking stability. Those include the position of the frontal toe, the stiffness of toes and heels, and the position of the ankle joint. Compared with the conventional foot with flat sale, the proposed foot is advantageous for human-like walking due to the inherent structural flexibility and the reasonable parameter values. Simulation results are provided to determine the design parameters and also show that the proposed foot enables smaller energy consumption.

• Journal of International Academy of Physical Therapy Research
• /
• v.2 no.1
• /
• pp.222-228
• /
• 2011

With comparison of maximum vertical reaction force and lower limb on drop landing between normal and flat foot group, this study is to provide fundamental data of the prevention of injury and the treatment of exercise which are frequently occurred on flat foot group's drop landing. The surface electrodes were sticked on lateral gastrocnemius muscle, medial gastrocnemius muscle, tibialis anterior and the drop landing on a force plate of 40cm was performed with a normal group who had no musculoskeletal disease and a flat foot group of 9 people who had feet examinations. Vertical reaction force were significantly statistically different between two groups(p<.001). Muscle activity of lower limbs in all three parts were not statistically different but showed high tendency on average in the flat foot group. The flat foot group had difficulties in diversification of impact burden and high muscle activity. Therefore, it was suggested that muscular strengthening of knee joints and plantar flexions of foot joints which were highly affected in impact absorption will be required.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.2
• /
• pp.67-71
• /
• 2013

Background: The purpose of this study was to investigate the effects of somatosensory stimulations with joints mobilization in foot on balance and gait speed in elderly women. Methods: This study included 2 female participants aged 72 years. Participants received somatosensory simulations with joints mobilization on both foot for 30 minutes a day, 3 days a week, during a 4 week period. All subjects were assessed using a BT(balance trainer)-4 balance measurement and timed up and go test (TUG), 10m walk test (10MWT). Results: It has been found that static length and static area were reduced and limits of stability was increased in 2 females. TUG test was improved but gait speed was not significantly difference. Conclusion: Those results indicate that somatosensory stimulations with joints mobilization is effective in elderly women to promoting a static and dynamic balance ability.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.1
• /
• pp.58-61
• /
• 2012

Motion of the metatarsophalangeal joints is essential for the normal gait. Therefore it is important to recover the motion of normal joint in the treatment of stiffness of the metatarsophalangeal joints. However, there have been no report about the treatment of stiffness of the four lateral lesser metatarsophalangeal joints yet. We report an experience that good clinical and radiographic results were obtained after resection arthroplasty for the post-traumatic stiffness of the four lateral lesser metatarsophalangeal joints.

• Journal of Biomedical Engineering Research
• /
• v.24 no.6 s.81
• /
• pp.495-500
• /
• 2003

The purpose of this investigation was to study the kinematics of joints between the foot segments based on computer graphic model during the stance? phase of walking. In the model, all joints were assumed to act as monocentric. single degree of freedom hinge joints. The motion of foot was captured by a video collection system using four cameras. The model fitted in an individual subject was simulated with this motion data. The range of motion of the first tarsometatarsal joint was $-8^{\circ}\;\~\;-13^{\circ}$, and the first metatarsophanlangeal joint was $-13^{\circ}\;\~\;-48^{\circ}$. The kinematic data of tarsometatarsal joint and metatarsophanlangeal joint were similar to the previous data. Therefore, our method based on the graphical computer model is considered useful.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.12-17
• /
• 2013

This paper presents a model of bipedal leg mechanism with a compliant foot, and the contact repulsion of the foot for a typical walking pattern and its influence on the knee and hip joints of the leg will be analyzed. This analysis is useful for us to figure out the physical impact of the foot when a walking robot takes a step. Also it can be applied to determine the joint specification of the leg mechanism. As a result, it is shown that the compliance characteristics of a robotic foot can contribute to alleviate the joint torques of the leg affected by the contact repulsion of the foot.

• Structural Engineering and Mechanics
• /
• v.77 no.3
• /
• pp.383-394
• /
• 2021

Column foot in traditional Chinese timber structures may be subjected to be uplifted due to the lateral load and subsequently reset under the vertical loads. The residual moment of the rocking column foot is the most important parameter representing the mechanical behaviors of column foot, and the simplification of joints is the basis of structural analysis of whole structure. The complicated mechanical behaviors of joint and the modeling of the column foot joint has been undertaken historically based on the experiments and numerical simulation. On the condition of limited application range of those models, a lack of simplified model to represent the mechanical behaviors of joint deserves attentions. There is a great need to undertake theoretical studies to derive the residual moment and make better simplified model of the joint. This paper proposes the residual moment and equivalent simplified model of the rotational stiffness for column foot joint. And, the timber frame is established based on the simplified model, which is verified by solid finite element model. Results show that a mutual agreement on the mechanical behaviors of the timber frame is obtained between the simplified model and the solid finite element model. This study can serve as the references of the structural analysis for the traditional timber structures.