• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.21-32
• /
• 2021

This study reports for the first time the application of electrocoagulation (EC) from laboratory to pilot scales for the treatment of printing wastewater, a hazardous waste whose treatment and disposal are strictly regulated. The wastewater was taken from three real printing companies with strongly varying characteristics. The treatment process was performed in the laboratory for operational optimization and then applied in the pilot scale. The weight loss of the electrode and the generation of sludge at both scales were compared. The results show that the raw wastewater should be diluted before EC treatment if its COD is higher than about 10,000 mg/L. Pilot scale removal efficiencies of COD and color were slightly lower compared to those obtained from the laboratory scale. At pilot scale, the effluent CODs removal efficiency was 81.9 - 88.9% (final concentration of 448 - 992 mg/L) and color removal efficiency was 95.8 - 98.6% (final level of 89 - 202 Pt-Co) which proved the feasibility of EC treatment as an effective pre-treatment method for printing wastewater as well as other high colored and hard-biodegradable wastewaters.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.183-192
• /
• 2015

Response surface methodology (RSM) based on a Box-Behnken Design (BBD) was applied to optimize the thermal-alkaline pre-treatment operating conditions for anaerobic digestion of flotation scum in food waste leachate. Three independent variables such as thermal temperature, NaOH concentration and reaction time were evaluated. The maximum methane production of 369.2 mL $CH_4/g$ VS was estimated under the optimum conditions at $62.0^{\circ}C$, 10.1% NaOH and 35.4 min reaction time. A confirmation test of the predicted optimum conditions verified the validity of the BBD with RSM. The analysis of variance indicated that methane production was more sensitive to both NaOH concentration and thermal temperature than reaction time. Thermal-alkaline pretreatment enhanced the improvement of 40% in methane production compared to the control experiment due to the effective hydrolysis and/or solubilization of organic matters. The fractions with molecular weight cut-off of scum in food waste leachate were conducted before and after pre-treatment to estimate the behaviors of organic matters. The experiment results found that thermal-alkaline pre-treatment could reduce the organic matters more than 10kD with increase the organic matters less than 1kD.

• 유통과학연구
• /
• 제16권2호
• /
• pp.53-65
• /
• 2018

Purpose - The purpose of this study is to investigate the effect of gamma - irradiation on the effluent from food distribution in the large agricultural and marine products market. This study will contribute to the distribution process as well as the agricultural and fishery distribution facilities. Research design, data, and methodology - In order to reduce the odor, the smell was examined in the anaerobic digestion process by irradiating gamma rays to the wastewater of mixed food discharged from a large restaurant. An odor determination panel list was constructed to determine if the odor was present in the air dilution drainage and the odor concentration was analyzed by instrumental analysis. Results - It was confirmed that the sulfur content increased gradually from 3 months. Ammonia decreased from 33.57ppm at the initial measurement to 4.12 ppm at the end of the experiment. Methane production was highest at 100kGy when exposed to gamma rays of 0-200kGy at pH 12. In other words, it is considered that gamma irradiation doses are most effective at 100kGy and are suitable for large capacity wastewater treatment facilities in terms of economic feasibility. Conclusions - In pre-treatment of compound food wastewater, gamma irradiation is most cost effective when examined at 100kGy. The economic efficiency of the pre-treatment method by gamma irradiation is much higher than the wastewater treatment in the large-scale agricultural and marine products distribution market.

• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.71-78
• /
• 2015

This study was performed to optimize the integrated thermal-alkali pre-treatment of flotation scum for the enhanced biodegradability. The optimum conditions of the integrated thermal-alkali pre-treatment were obtained using response surface methodology. The disintegration degree of carbohydrate (69.2%) and protein (57.3) were estimated under the optimum conditions. Although the optimum conditions were different, the disintegration degrees were similarly. A fermentative hydrogen batch test was conducted to evaluate the hydrogen production from scum with and/or without. The maximum hydrogen production from scum with pre-treatment was of 0.64 mol H2/mol hexoseadded, which about 1.4 times higher than without pre-treatment.

• 유기물자원화
• /
• 제19권2호
• /
• pp.22-27
• /
• 2011

본 연구에서는 음식물류폐기물폐수와 양돈폐수를 특별히 전처리 하지 않고 3:7의 비율로 혼합하여 연속반응공정을 이용한 수소생산의 최적 인자를 도출하기 위해 연구를 수행하였다. 본 연구결과 수소발생량은 pH 5.5의 조건에서 가장 많이 발생하였으며, 이를 통해 음식물류폐기물과 양돈폐수의 혼합시의 수소생산의 최적 pH는 5.5 임을 확인하였다. HRT에 따른 수소발생량은 3일보다 4일의 경우에 높은 수소발생량을 보였으며, 이는 HRT값의 변화에 따라 수소발생미생물의 활성에 크게 관여하는 것으로 HRT역시 수소발생미생물에 중요한 인자로 작용한다고 판단된다. 유기물의 제거율은 운전 6일째에 최대 TS 52%, VS 71%, TSS 83%, VSS 89%의 제거율을 기록하였으며, 수소생산 공정을 통하여도 유기물의 제거가 가능함을 확인하였다.

• 상하수도학회지
• /
• 제26권5호
• /
• pp.629-636
• /
• 2012

This study focuses on the feasibility of bio-gas production using anaerobic digestion by measuring methane generation and biodegradability through the BMP test of industrial organic wastes. Organic wastes consist of entrails of pigs and organic residues of rumen generated from slaughter houses, wastewater sludge from slaughter waste water, fish offal and residues of vegetables from public wholesale markets, and wastewater sludge from the process of wastewater treatment in paper mill. The cumulative methane production by BMP test ranges from 149.3 ml/g-VS to 406.6 ml/g-VS and this is similar to methane generation of the normal wastewater sludge and food waste. As a result of measurement of biodegradability, wastewater sludge (S1 ~ S4) is low, ranging from 27.1% to 58.9 % and organic residues of rumen (G1) is low at 49.6 %. In conclusion, it turned out that raising the hydrolysis by various pre-treatments is necessary in order to produce bio-gas by using industrial organic wastes.

• 농촌계획
• /
• 제12권2호
• /
• pp.49-56
• /
• 2006

The application of domestic wastewater on rice paddies results in the accumulation of sodium(Na$^+$) to the soil. Excessive concentration of sodium may cause the deterioration of the physical characteristics of the soil, change in the osmosis of the soil, destruction of soil aggregates as well as ion toxicity due to sodium accumulation. Using domestic wastewater as irrigation water should be preceded by measures to prevent or control the soil salinization caused by sodium. Agricultural reuse of domestic wastewater were found not to cause serious problems with food safety due to heavy metals. However, pre-treatment using ultraviolet or ozone is recommended to reduce the number of bacteria and gem and for public health reasons. Using domestic wastewater has shown that reducing the standard application of chemical fertilizers by as much as 50% reduced the harvesting index by only 10%. This study has shown that it is feasible to reuse domestic wastewater on rice paddies. In order to facilitate the application, it is deemed necessary to establish wastewater treatment technologies in the future, to review criteria for recycling domestic wastewater for agricultural purposes such as conditions of soil and cropping system and to resolve conflicts with farmers and public health issues.

• KSBB Journal
• /
• 제23권1호
• /
• pp.83-89
• /
• 2008

음식물쓰레기를 처리하기 위한 3단계 메탄발효시스템으로부터 유출되는 음식물 발효 폐액은 고농도 유기성 폐수이다. 유기성 폐수는 고도처리 시스템에 의해 방류기준에 적합하게 처리되어져야만 한다. 본 연구에서는 유기성 폐수를 처리하기 위해 고효율 $UV/TiO_{2}$ 광촉매 산화공정의 최적 운전 조건을 조사하였다. 첫 번째 공정에서 폐수에 응집제인 $FeCl_{3}$를 전처리 하였으며, 응집을 위한 최적 pH와 응집제의 농도는 각각 pH 4와 2000 mg/L이었다. 이 공정을 통하여 최대 52.6%의 COD가 제거되었다. 두 번째는 $UV/TiO_{2}$ 광촉매 산화공정으로, 최적 운전 조건은 중심파장이 254 nm, 폐수 온도 및 pH가 각각 $40^{\circ}C$와 pH 8, 반응기 주입 공기량이 40 L/min인 것으로 조사되었다. 응집제를 이용한 전처리 공정과 광촉매 산화공정을 병합하여 최적조건에서 폐수를 처리할 경우 T-N과 COD의 제거율은 각각 69.7%와 70.9% 이었다.

• 유기물자원화
• /
• 제28권1호
• /
• pp.53-64
• /
• 2020

다단수직형 적층 방식의 질산화조가 포함된 2㎥/d 병합폐수처리 파일럿플랜트를 설치하여, pH8 이상, DO 1mg/L, 내부반송율 4Q이상의 단축질소제거공정의 질산화조 운전 조건으로 약 1년 이상 운영하였다. 음폐수와 침출수의 경제적인 병합 처리를 위하여, 유분이 최소화된 음폐수를 전체 처리량의 5~25%로 조절하여 최적의 병합 비율을 검토하였다. 음폐수의 고형물과 유분을 효과적으로 분리하기 위하여 도입된 3상원심분리기의 주요 처리 효율은 SS는 116,000mg/L에서 55,700mg/L로 약 52% 제거 되었으며, 노르말헥산(N-H)의 농도는 53,200mg/L에서 27,800mg/L로 약 48%로 제거되었다. 운전 기간 중 병합 폐수처리 공정의 BOD 평균 제거 효율은 99.3%, CODcr 94.2%, CODmn 90%, SS 70.1%, T-N 85.8%, T-P 99.2%로 분석되었다. 처리수의 BOD, CODcr, T-N, T-P 평균 농도는 침출수 배출허용 기준("나"지역)을 만족하였으며, SS는 멤브레인조를 적용한 후 만족하였다. 현장의 침출수는 유량조정조의 간헐적 폭기 및 월별 상이한 방출량의 영향으로 병합폐수 중 아질산성 질소의 성분이 비교적 높았다. 아질산성질소가 축적된 상태에서도 완전질산화 후 탈질보다는, 아질산성 질소에서 탈질되는 결과가 나타났다. 또한 운전기간 중 평균 소포제 투입량은 약 2L/d으로 같은 폐수를 처리할 시 필요한 메탄올 투입량 약 2.8L/d 대비하여 경제적인 것으로 보인다.

• 공업화학
• /
• 제28권5호
• /
• pp.581-586
• /
• 2017

본 연구에서는 하수 슬러지 및 음폐수의 효율적인 병합처리를 위해 고온호기 전처리의 적용가능성을 알아보고자 고온호기-중온혐기 연계공정의 소화효율과 메탄가스 생성량에 미치는 영향을 비교 검증하였다. 또한, 유기물 부하량 증가에 따른 공정 내 변화 양상을 관찰하기 위해 실험실 규모의 고온호기-중온혐기 소화장치를 제작하여 음폐수를 증류수로 희석하는 비율을 1/3 (Run I), 2/3 (Run II) 및 원액(Run III)으로 줄여가며 혐기소화 공정 내 변화 양상을 관찰하였다. 실험 결과 별도의 pH 조절 없이 고온호기-중온혐기 연계공정 소화조 내에서 pH가 7~8으로 안정하게 유지됨을 알 수 있었다. Volatile solid (VS)는 순응 기간 후 고온호기-중온혐기 연계공정에서 52.24% (Run I), 66.59% (Run II) 및 72.53% (Run III)의 제거효율을 보이며, 중온혐기 소화조(R3)에 비교하여 높은 VS 제거율을 보였다. 또한, 고온호기-중온혐기(R1-R2) 연계공정에서 약 1.6배 향상된 메탄 생성률이 관찰되었으며, 메탄수율의 경우에도 고온호기-중온혐기(R1-R2) 연계공정에서 현저하게 높은 값을 유지하였다.