• Clinical and Experimental Pediatrics
• /
• v.52 no.2
• /
• pp.205-212
• /
• 2009

Purpose : Chronic urticaria is a disorder characterized by the appearance of wheals for more than 6 weeks; in most cases, the etiology is unknown. This study was aimed to discover the clinical aspects, the etiologic factors, and the course of chronic urticaria. Methods : 51 children who were diagnosed with chronic urticaria in the past 4 years, and who had had follow-ups more than 6 months after diagnosis in the pediatric department of Soonchunhyang University Hospital in Bucheon, were enrolled in the study. The laboratory findings, clinical aspects, and courses were retrospectively investigated by medical record review and telephone interview. Results : The median age of children with chronic urticaria was 4 years (8 months to 16 years) and the ratio of male to female was 1.4:1. Of the total, 39.2% of patients had a history of atopy. Angioedema occurred concurrently with urticaria in 11.8% of patients, and dermographism was seen in 41.2%. Results of thyroid function tests were normal and thyroid autoantibodies were absent in all cases. Regarding etiology, most cases (74.5%) were forms of idiopathic urticaria. Urticaria was induced by physical factors in 19.6% of patients. Open challenge tests revealed that 3 patients were allergic to food additives (glutamate 2, glutamate, and sulfite 1). In this study, most of the patients reported good response after medication of 1st- or 2nd-generation antihistamines alone. Follow-up at 6 months revealed that 70.6% of patients had experienced remission, and 84.8% of children who had follow-up at 1 year presented remission. Conclusion : Chronic urticaria in most patients was idiopathic. Remission occurred within 1 year of diagnosis, in most cases so chronic urticaria in children seems to have good prognosis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.280-285
• /
• 2016

Mandible defects could be caused by congenital malformations, trauma, osteomyelitis, tumor resection. If large areas are included for reconstruction, those are primarily due to tumor resection defects. The large jaw defect results in a problem about mastication, swallowing, occlusion and phonetics, and poor esthetics causes a lot of inconvenience in daily life. It is almost impossible to be a part underwent mandibular resection completely reproduced, should be rebuilt artificially. This case is of a patient who was diagnosed with squamous cell carcinoma pT1N0M0, stage I in February 2004 and received surgery (combined mandibulectomy and neck dissection operation (COMMANDO) in oromaxillofacial surgery) in March 2004, by implant assisted removable partial denture. We could obtain good retention and stability through sufficient coverage and implant holding. Follow up period was about four years. Mandibular left third molar regions have been observed to have resorption of surrounding bone, and periodic check-ups are necessary conditions.

• Journal of Distribution Science
• /
• v.11 no.8
• /
• pp.25-30
• /
• 2013

Purpose - Foodservices have grown to over 60% of the franchise industry. However, despite reaching this high level, the foodservice franchise industry is experiencing severe ups and downs. While factors such as expansion by franchises and the entry of large multinational firms are causing this imbalance, the more serious problem faced by franchisees is the lack of know-how and correct operating procedures. Franchise headquarters should advise franchisees on important matters such as food ingredients, interior design, tableware, and fixtures. However, even though franchise headquarters have the ability to impart such management know-how, this is often a neglected area. Research design, data and methodology - This study was conducted in an industrial environment to present suitable competitive alternatives for foodservice franchises. Empirical analysis was conducted using a sample of 232 people with experience in targeting customers. The main purpose of this study is not to identify and analyze the factors affecting customer satisfaction. Customers of the Food Service Industry to invite contacts until departure for the service flow by identifying the expectations and allow this area by analyzing the resulting measures to enhance the competitiveness has presented. Results - Actual results contact factors affecting the quality of service on customer satisfaction was a significant influence. However, the end of this analysis, the actual customer satisfaction directly affects the quality of service that is only important factor can commit mistakes. Relatively large impact on customer satisfaction, which is relatively independent of the quality factor should be a review of zone of tolerance. In this study, eating phase relative to contact the service customer satisfaction was the most influential. The results, however, zone of tolerance for an area in the waiting and ordering dissatisfaction factors are appearing. And in the course of these services outside the zone of tolerance area is unsatisfactory evaluation is being done. Conclusions - After all, Foodservice, the contact service management for zone of tolerance the top priority should be can be seen. Foodservice contact first in the case of service quality factors caused by the continuous flow of services, so this step-by-step identification needs to be clearer. This, of course, to distinguish between the actual per unit of activity appears to be more difficult to follow, for it seems to need a lot of future complementary. Next is the assessment of customer service quality. Customers remember the experience for the services of a real contact through the assessment and service evaluation clearly emerge as the expected level can be difficult. However, this situation is controlled by the test method cannot be avoided unless there is no limit to the number of leave. Despite these limitations, the next step to contact a service evaluation and analysis have to continue to refine and thereby franchisees for the operation of the store in terms of practical know-how required to provide to the office believe.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1295-1309
• /
• 2016

This paper is to reproduce the result of Kim et al. (2014) by deriving a benchmark dose lower bound (BMDL) of lead based on the 2005 cohort data set of Children's Health and Environmental Research (CHEER) data set. The ADHD rating scales in the 2005 cohort were not consistent along the three follow-ups since two different ADHD rating scales were used in the cohort. We first unified the ADHD rating scales in the 2005 cohort by deriving a conversion formula using a penalized linear spline. We then constructed two linear mixed models for the 2005 cohort which reflected the longitudinal characteristics of the data set. The first model introduced the random intercept and the random slope terms and the second model assumed the first order autoregressive structure of the error term. Using these two models, we derived the BMDLs of lead and reconfirmed the "regression to the mean" nature of the ADHD score discovered by Kim et al. (2014). We also noticed that there was a definite difference between the sampling distributions of the two cohorts. As a result, taking this difference into account, we were able to obtain the consistent result with Kim et al. (2014).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.59-88
• /
• 2008

For the success of the DMB market to meet consumers' demands for Ubiquitous Media and strengthen the nation's competitiveness, it's inevitable for us to activate DMB advertising as of main profit source for DMB Media, and to develop various types of DMB advertising which are linked to the profit model. So I'd like to look over the various types of DMB advertising which are suitable for DMB features as one of the efforts to activate DMB advertising. First of all, I've figured out what kinds of advertising are available for new media and which related technologies are required for DMB media. Through this research, I could find out what features of new media such as cable broadcasting, Internet and Mobile have become the source of developing various types of advertising and how to a great part to activate new media advertising markets by making the best use of their media features. This research also shows that DMB advertising has the high potential to be developed in various and effective types and kinds of advertising with its media feature and technological feature. This research observing DMB advertising cases showed that DMB advertising can be divided into 6 types such as forms, purposes, techniques, advertising positions, the use of LBS(Location Based Service), coupons and it could be developed into various kinds of DMB advertising dependent on each type. On the other hands, it would be great to have continual researches and follow-ups for various types of DMB advertising and the verification of the effectiveness for DMB advertising by performing potential DMB advertising.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.386-392
• /
• 2018

Turner syndrome (TS) is a chromosomal disorder caused by monosomy of the X chromosome, with complete or partial absence of the second sex chromosome. Anomalies of root morphology have been found to occur more often in patients with TS, which make endodontic treatment challenging and requires special handling. The patients with TS may also have systematic problems such as cardiac or renal malformations, so in treating these patients it is important for clinicians not only to be aware of the characteristic intraoral findings, but also to make the patients have regular dental check-ups to prevent oral complications in advance. An 12-year-old girl who had been diagnosed with TS at the age of 10 years was referred due to discomfort in the bilateral mandibular premolar regions. Dens evaginatus and taurodontism were detected in all the mandibular premolars characteristically. The bilateral mandibular first premolars had three roots and the bilateral mandibular second premolars had periapical lesion with two roots. Due to the complexity of the root canal anatomy, root canal treatment were completed with a dental microscope to ensure adequate visualization. After 2 years of regular follow-up examinations, there were no clinical sign or symptom associated with the teeth, and no periapical lesion, was found. This case report describes the characteristic oral features and dental management of TS patients.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.185-206
• /
• 1998

The purpose of this study was to improve productivity for maximum effects with the present equipments and staff. This study compared and analyzed the mea-sured time by using stop watch method and MTM, which was the new measuring method. The flow and results of this study were as follows: 1. This study investigated the theoretical background the efficiency for production management, and the way of productivity improvement through documentary research. 2. Setting up the standard flow on the experi-mental company production, making out a process chart and measuring the actual working hour. 3. The study measured the allowance time applying work sampling. 4. Each process of the movement analysis was filmed by video to use basic data. 5. MTM analysis was taken by choosing 10 processes from front bodice according to the basic movement of MTM. Through the results, this study exclude unneccesary movements and suggest a method for working ways. 6. Using the actual working hour measured by a stop watch calculated the pitch time and presumed the amount of daily productivity. 7. The result of the work sampling came out as 38% of allowance rate. It was 13% higher than the standard amount of woman's jacket allowance rate, which was 25%. The most influencing factor was work discussion. That was because there were commuication problem of the work way between the operator and leader. More adequate use of flow table and level passing table was needed. There were the problems that inappropriate places and sizes made the distance of movements longer and often needed more adjustment of works and surroundings. To prevent breakdowns equipments check ups were necessary before works. 8. The results of MTM analysis were as follow : the time was reduced 40% than the actual measured time by a stop watch. This was because the leveling of the operator was included in the real calculation. Also, leveling was included in MTM analysis and all the conditions were standarized. Therefore MTM method was a scientidic measuring way of establishing the standard time. The presented method of this study, suggested an ideal method eliminating unneccesary motions, and presented standardization of works. Improvement of working methods, work condition and simplifying motions in each 10 processes reduced the working time from total 656 seconds to 301 seconds. 9. The way and time of working was linked together in the MTM analysis methods. Thus data from MTM help suggest not only establishing standard time but also establishing stan-dard work. Plus it includes various ability for improvements of working ways. So it is an objective method which can be widely used in other work studies. 10. The function of a time study is to determine the amount of work produced with a given method. The work rate is used to establish the cost of labor. The wage of worker must be calculated per unit time which is deter-mined before the time study is made. This study tried to introduce the incentive rule for deciding wages according to the standard time by MTM method.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.8
• /
• pp.617-622
• /
• 2011

The policy of total maximum daily load (TMDL) was introduced to manage wasteload within the loading capacity to achieve water quality standards in the watershed. While the TMDL was implemented, the institutional and technical correction for the improvement of procedure was accomplished even though there were various problems and basically through the process of trial & error. However, a fundamental improvement of this policy is needed to implement the TMDL. This study has come up with a new viewpoint on improving this procedure for reasonable implementation of TMDL. First of all, the water quality and flowrate monitoring of the tributaries should be implemented. This should be done through the establishment of a monitoring system which will include standards of scope, a set time period, water quality parameters and frequency follow ups for the implementation of TMDL. The basic plan in all of the watersheds should be developed based on the establishment of water quality parameters and standards for water use and ecological purposes according to the results of the water quality and flowrate monitoring in the watersheds. The implementation plan for water quality improvement should be established in the watersheds where exceeds the targeted water quality standards. The performance assessment of TMDL should be conducted every year to meet the satisfaction assessment of water quality standards in the watersheds. Finally, if the water quality standards in the watersheds can not be attained or the water quality parameters and standards should be changed, the implementation procedure will be performed according to the iterative process. On the contrary, the policy of TMDL in the watersheds where the water quality standards have been met the goal will be finished.

• Journal of Gastric Cancer
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2010

Purpose: The aim of this study was to compare quality of life of long-term survivors after a subtotal or a total gastrectomy for gastric cancer. Materials and Methods: The European Organization for Research and Treatment of Cancer (EORTC) QLQ-C30 questionnaire and QLQ-STO22 questionnaire were used to assess quality of life of 166 patients on their 5th annual follow-ups after gastrectomy for gastric cancer. One hundred twenty-six patients underwent a subtotal gastrectomy and 40 patients a total gastrectomy. Results: The subtotal gastrectomy group revealed a trend to have better quality of life in functional scales (physical, role, emotional, cognitive and social), fatigue, pain, dyspnea, diarrhea and financial difficulties. The total gastrectomy group showed a trend to have better quality of life in the global health status and quality of life, nausea and vomiting, insomnia, appetite loss and constipation. In all scales of the EORTC QLQ-STO22, the subtotal gastrectomy group had a trend to have better quality of life. However these did not reach the statistical significance. Conclusion: Surgeons may not limit the extent of resection concerning long-lasting poor quality of life. Oncologically sound resection is recommended.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.489-497
• /
• 2009

Occurrence of multiple cysts in jaw bone is rare compared to solitary cysts. numerous cysts occurring in jaw bone which not accompany any syndromes are defined as multiple jaw cysts, and most of these cases in children are keratocystic odontogenic tumor (KCOT) Multiple KCOT occurring in children are often associated with basal cell nevus syndrome(BCNS), so if multiple cysts are found on the radiograph, we suspect this syndrome and pursue clinical and pathological tests. In this case, a pediatric patient, reporting with multiple cysts in the jaw was suspected of BCNS, but hasn't shown any other symptoms of this syndrome up to date, and has kept repeating surgical operation and recurrence of the tumor. Although no symptoms besides multiple jaw cysts is present, it is often reported that other symptoms appear late in the patient's age. Therefore, in cases where multiple odontogenic tumors are found in children, continuous radiographic and clinical follow-ups in order to check the progress of the syndrome is considered important.