• 제목/요약/키워드: Folding Hinge

검색결과 11건 처리시간 0.018초

대중교통 연계를 고려한 도심형 접이식 자전거 개발 (Development of an Urban Folding Bike for Public Transportation)

  • 정태성
    • 소성∙가공
    • /
    • 제22권1호
    • /
    • pp.42-47
    • /
    • 2013
  • The bicycle is one of the most important eco-friendly transport methods which can mitigate global warming. The portability of a bike on public transportation systems is essential for the wide spread use of bicycles by people in urban environments. In this study, a lightweight urban folding bike was developed with careful consideration of the association with public transport. A folding frame using a moving slide link mechanism made from AL6061 is proposed. Numerical analysis was conducted to evaluate structural safety of the bike in both vertical and pedal loading tests. The proposed urban folding bicycle weights only 10kg and summation of its width, length, and height in the folded configuration is under 158cm.

후판을 이용한 힌지 브래킷 성형 공정 설계 (Design of a Hinge Bracket Forming Process Using Thick Plate)

  • 장명근;최효성;이현규;신양재;김종봉
    • 소성∙가공
    • /
    • 제25권4호
    • /
    • pp.227-234
    • /
    • 2016
  • In the transportation between countries using container, too many empty containers must be transported due to the transportation unbalance. For transportation efficiency, therefore, foldable containers are being developed. Hinge brackets are important parts of foldable containers because great force is applied on the hinges during loading onto and unloading from ships. In this study, the hinge bracket for a foldable container is designed to be made using thick plate or bulk materials to endure the heavy loads. The forming process for the hinge bracket using a thick plate is designed via numerical analysis. First of all, the shape of bracket is designed for the better formability. Bending and successive side wall thickening processes are employed for the forming of the hinge bracket. Maximum thickening that can be achieved in a single stage of forming without a folding defect is determined and three stage of thickening processes are designed.

다구찌 방법을 활용한 Rear Center-Hinge Bracket 강건 설계 (Robust Rear Center-Hinge Bracket Optimization Based on Taguchi Method)

  • 정세빈;김민호
    • 한국자동차공학회논문집
    • /
    • 제22권3호
    • /
    • pp.203-209
    • /
    • 2014
  • The rear center-hinge bracket is designed for supporting and folding the rear-seat backrest. This bracket needs to be strong enough to be able to rigidly hold the rear-seat backrest and to withstand luggage loads from the car trunk that are generated when a vehicle is driving on the roads. Particularly, current accident studies report that many serious occupant injuries occurred when the rear-seat back easily folded inward toward the car interior, driven by the luggage loads in the trunk. Given this fact, the robust design of the rear center-hinge bracket that mainly supports the rear backrest has become more important for providing customer safety and preventing high warranty and durability problems. However, none of the studies have emphasized its significant role and considered its robust optimization. Therefore, this paper presents how the hinge-bracket design is optimized based on an application of the finite-element method coupled with the parameter design using Taguchi's design experiment. Finally, Taguchi method's application optimizes a robust center-hinge bracket that shows more rigid performance although it has lighter weight and thinner thickness.

DLP, FDM 3D 프린팅 출력 방식에 따른 치수 특성에 관한 연구 (Dimensional Characteristics of 3D Printing by FDM and DLP Output Methods)

  • 정명휘;공정리;김해지
    • 한국기계가공학회지
    • /
    • 제20권1호
    • /
    • pp.66-73
    • /
    • 2021
  • In this paper, we analyzed and considered the precision of parts produced by 3D printing methods. For the latch systems applied to the Wingline folding doors, the 3D shape of the door hinge part was printed using FDM and DLP methods. Then, the 3D printed shape was scanned to measure the dimensions and dimensional changes of the actual model. In the comparison and analysis of the 3D printed door hinge parts, because the output filling density is 100% owing to the characteristics of DLP 3D printing, the filling density in FDM 3D printing was also set to 100%.

한반도 중서부 대청도에 발달하는 광역규모 과습곡의 구조기하학적 특징 (Structural Geometry of a Regional-scale Overturned Fold in the Daecheong Island, Central-western Korean Peninsula)

  • 박정영;조등룡;이승환;곽유정;박승익
    • 자원환경지질
    • /
    • 제57권1호
    • /
    • pp.41-50
    • /
    • 2024
  • 본 연구는 한반도 중서부 대청도에 발달하는 광역규모 습곡의 구조기하학적 특징과 형성 기작에 대하여 보고한다. 야외에서 획득한 구조 요소 자료를 기반으로 구조 영역별 등면적 하반구 스테레오 투영과 습곡된 지층 경계의 하향 투영을 수행한 결과, 연구지역에 발달하는 습곡은 북동 방향으로 완만하게 침강된 개방 과습곡으로 분류된다. 과습곡 날개부의 비대칭 기생습곡과 힌지부의 대칭 기생습곡은 지층과 평행한 압축작용을 경험한 이후 요굴흐름 기작이 발생했음을 의미한다. 한반도 중서부의 조산운동사에서 대청도 과습곡이 가지는 의미를 규명하기 위해 향후 습곡의 형성시기 규명이 반드시 필요하다.

고려시대 가구재료 연구 (A Study on the Material of Furniture in Goryeo)

  • 조숙경
    • 한국가구학회지
    • /
    • 제25권1호
    • /
    • pp.19-27
    • /
    • 2014
  • This paper studied the materials of the furniture which the noble men used in Goryeo, based on the furniture material category of solid wood furniture, lacquerware inlaid with mother-of-pearl and hardware. As for the solid wood furniture, the wood and furniture types are inferred based on the documents. The trees used for the wood furniture were zelkova, korean willow, pine, royal paulownia, maidenhair tree, korean pine, chinese juniper and elm. The furniture types were table, chair, wooden bench, small portable table, writing table, and folding screen. As to the types of lacquerware inlaid with mother-of-pearl, most of them were hams with top, which were made of abalone shells. The features of the lacquerware inlaid with mother-of-pearl were in detail and elaborate like the pattern of the full bloomed chrysanthemum. Writing tables were also made of lacquerware as pieces of furniture. Distinctively, the mother-of-pearl furniture material was popular enough to be used even in a horse saddle. Regarding the metal feldspar used as both a practical use and decoration, there are drop handle, hinge, the front basis, and lock seen in the artifacts, which were made of cast iron, bronze, and brass. Their manufacture techniques were eojamoon, bratticing and sheet metal. Through this study of the furniture materials used in Goryeo, it seems that Goryeo furniture focused on the functions rather than on the decorations, and in turn the forms were simple and basic. The technique of mother-of-pearl, a bit elaborate one, was used in the props furniture like kitchen wares, hams, or writing talbes. Probably, the solid wood is inferred to be used in a low wooden bench, a chair, and a table based on the documents.

  • PDF

산왕거미 (Araneus ventricosus) 독 생성장치의 미세구조 분석 (Fine Structural Analysis of the Venom Apparatus in the Spider Araneus ventricosus)

  • 문명진;유민희
    • Applied Microscopy
    • /
    • 제37권2호
    • /
    • pp.53-63
    • /
    • 2007
  • 왕거미과의 산왕거미(Araneus ventricosus)를 실험재료로 하여 독 생성장치의 미세구조를 주사전자현미경으로 관찰하였다. 두흉부에 위치한 거미의 독 생성장치는 위턱(chelicera)과 한 쌍의 독선으로 이루어졌으며, 각각의 위턱은 기저마디와 가동성 엄니(fang)가 관절된 형태를 이루고 있었다. 산왕거미의 위턱은 체축에 대해 직각 방향으로 접히는 새실젖거미아목(Labidognata)의 특성을 지니고 있었으며, 관절을 통해 연결된 두개의 마디는 마치 접이식 재크 나이프와 유사한 구조를 하고 있음이 확인되었다. 원통형의 엄니는 다수의 돌기가 형성된 위턱고랑(cheliceral groove)과 분화된 접번관절로 연결되어 있었다. 또한, 위턱고랑에는 4개의 앞엄니두덩이(promarginal teeth)와 3개의 후엄니두덩이(retromarginal teeth) 등, 총 7개의 큐티클성 엄니두덩이가 두 줄로 융기된 구조를 형성하고 있었다. 엄니의 말단에는 독액을 분비하는 단일분비구멍이 후연돌기와 면한 쪽의 표면을 통해 개구되어 있었으며, 굴곡운동시 엄니와 접하는 위턱고랑의 표면에는 거친 함몰부가 형성되어 있었고 다수의 미세한 분비 구멍들이 확인되었다.

전개장치용 복합재료 테이프 스프링 개발 (Development of Composite Tape-Springs for Deployable Structures)

  • 김영배;정근성;김도원;최한솔;임재혁
    • Composites Research
    • /
    • 제34권4호
    • /
    • pp.226-232
    • /
    • 2021
  • 본 논문에서는 전개장치용 복합재료 테이프 스프링 개발을 위해 테이프 스프링의 설계, 해석, 제작 및 기계적 특성을 검토하였다. 이를 위해 다양한 복합재료 소재를 선정하고 3개의 적층 패턴에 따라 제작하여 굽힘 시 파손여부를 구조해석과 실험적으로 검토하였다. 이중 파손이 발생하지 않고 잘 굽혀지는 소재와 적층 패턴을 선정하였다. 이렇게 확보된 정보를 이용해 전개구조물용 테이프 스프링을 개발하고 4점 굽힘 시험을 통해 구조적인 특성을 검토하였다. 시험 결과로부터 굽힘과 펴짐에 따라 모멘트-회전 곡선에서 테이프 스프링 고유의 비선형 히스테리시스 현상이 적절히 구현됨을 확인하였다. 따라서 복합재료 테이프 스프링이 적절히 개발된 것을 확인하였다.

Production of pediocin by Chemical Synthesis and Bactericidal Mode of Action

  • Koo, Min-Seon;Kim, Wang-June;Kwon, Dea-Young;Min, Kyung-Hee
    • 한국미생물생명공학회:학술대회논문집
    • /
    • 한국미생물생명공학회 2001년도 Proceedings of 2001 International Symposium
    • /
    • pp.149-153
    • /
    • 2001
  • To investigate the mode of bactericidal action for antimicrobial peptide, pediocin, synthetic and mutant pediocins were prepared by direct chemical synthesis. Native pediocin was purified from Pedio-coccus acidilactici M and its conformational structure and bactericidal functions were analyzed and compared to synthetic pediocin. Schematic mode of pediocin actions, how pediocin binds on the target cell membrane, penetrates and makes tunnel are proposed. For these purposes, primary and secondary structures of pediocin was analyzed and disulfide bond assignment was also done. The pediocin purified from P. acidilactici M had high effective bactericidal ability against gram positive bacteria, especially Listeria monocytogenes and was very stable at extreme pHs and even at high temperatures such as autoclaving temperature (121$^{\circ}C$). Pediocin was consisted of 44 amino acids with four cysteines. Novel synthetic peptides were achieved by solid phase peptide synthesis(SPPS) method. To explain the function of cysteine in C-terminal region, mutant pediocin, Ped[C24A+C44A], was synthesized and their structural and biological functions were analyzed. Second mutant pediocin, Ped[KllE], was prepared to explain the function of lysine at 11 of N-terminal part of pediocin, especially loop of $\beta$-sheet, and to predict the initial binding site of pediocin. The native and synthetic pediocins was showed random coil conformation by spectropolarimetry in moderate conditions. This conformation was observed in extreme conditions such as high temperature and low and high pHs, also. Circular dichroism(CD) data also showed the existence of $\beta$-turn structure in N-terminal part both native and synthetic pediocins. A structural model for pediocin predicts that 18 amino acids in the N-terminal part of the peptide assume a three-strand $\beta$-sheet conformation. This random coil in C-terminal part of pediocin was converted to folding structure, helix structure, in nonpolar solvents such as alcohol and TFE. The disulfide bond between $^{9}$ Cys and $^{14}$ Cys was concrete and inevitable, however, evidences of disulfide bond between $^{24}$ Cys and $^{44}$ Cys was not. Data of Ped[C24A+C44A], pediocin mutant showed that $^{44}$ Cys was required during killing the target cells but not inevitable, since Ped[C24A+C44A] still have bactericidal activity but much less than native pediocin. Another pediocin mutant, Ped[KllE], had still bactericidal activity, was controversial to propose that positive charge like as $^{11}$ Lys in loop or hinge in bacteriocin bound or helped to binding to microorganism with electrostatic interaction between cell membrane especially teichoic acid and positive amino acid nonspecifically. The conformation of pediocin among native, synthetic and mutant pediocins did not show big difference. The conformations between oxidized and reduced pediocin were almost similar regardless of native or synthetic.

  • PDF

경기도 광주시 일대의 지질구조와 변형사 (Geological Structure and Deformation History in the Gwangju area, Gyeonggi-do, Korea)

  • 이희권;김만광
    • 암석학회지
    • /
    • 제14권2호
    • /
    • pp.108-115
    • /
    • 2005
  • 경기육괴 중앙부의 광주시 일대에 분포하는 선캠브리아기의 경기편마암 복합체는 흑운모호상 편마암 및 석영장석질 편마암으로 구성되어 있다 지질구조 분석결과 연구지역은 적어도 다섯 번의 변형작용을 받은 것으로 밝혀졌다. 첫 번째 변성작용(M1) 및 변형작용(Dl)중에 퇴적암(층리; S0)이 변성되어 흑운모호상 편마암으로 되었으며, 성분엽리(S1)가 발달되었다. 심성암이 관입 후 두 번째 변성작용(M2) 및 변형작용(D2)이 일어났으며, 이때 심성암이 엽리(S2)가 발달된 석영장석질 편마암으로 변하였다. 세 번째 변형작용(D3) 중에 수십 cm 규모의 밀착습곡 및 등사습곡(F3)이 발달하였으며, 축면방향으로 성분엽리(S3)가 발달하였다. 변위작용에 의해 뿌리 없는 습곡(F3)이 S3 엽리와 평행하게 발달되어 있다. 네 번째 변형작용(D4) 중에 남북방향의 압축력에 의해 약 100m의 축면분리를 가지는 F4 습곡이 동서 방향으로 발달하였다. 다섯 번째 변형작용 중에 동서 방향의 압축력에 의해 축면분리가 약 3km 규모의 남북 방향의 F5 습곡이 발달하였다. F5 습곡의 중심부에서는 F4 습곡에 F5 습곡작용이 중첩되어 F5 습곡의 습곡축면과 평행한 남북방향으로 F4 습곡이 발달되어 있으며 날개 사잇각 및 축면분리가 작아졌다. 반면에 F5 습곡의 서쪽 날개 지역에서는 북동방향으로, 동쪽 날개 지역에서는 북서방향으로 F4 습곡이 회전되었다. 연구지역에 발달되어 있는 엽리의 궤적은 주로 F4 습곡 및 F5 습곡에 의해 지배되어 있다. F4 습곡작용 동안에 취성변형작용에 의해 절리 및 단층이 발달하였으며 F5 습곡의 양쪽 날개부에는 부채꼴 절리가 우세하게 발달하고, 힌지대에는 be-절리가 우세하게 발달하였다 그 이후에 북서 방향의 주향이동 단층이 지질도 규모로 발달하였다. 제4기 동안에 발생한 산사태가 일부 절리 및 엽리의 방향을 반시계방향으로 약 $15^{\circ}$ 회전시켰다.