• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.460-464
• /
• 2009

The purpose of the study was to investigate the changes of drapability and mechanical properties with folded yarn conditions. The samples were knitted 100% cotton yarn with hand-knitting machine. Mechanical properties were measured by Instron and Kawabata tester. Drapability was measured by Drapemeter. The differences in each sample were observed in the experimental results. This study showed that folded conditions were important conditions for fabric handle and properties.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.630-634
• /
• 2010

In this paper, we designed and fabricated a multi-band folded monopole antenna for mobile handsets that can be used for multiple services. The proposed antenna, with a small size of $28.060{\times}12.665{\times}5.035mm^3$ can provide sufficient bandwidth to cover the GSM900 (Global System for Mobile Communications: 880-960 MHz), DCS (Digital Cellular System: 1710-1880 MHz), K-PCS (Korea-Personal Communication Service: 1750-1870 MHz), Wibro (2300-2390 MHz) and Bluetooth (2400-2483 MHz) bands.

• Economic and Environmental Geology
• /
• v.10 no.4
• /
• pp.177-184
• /
• 1977

This study is focused on the geological structure of Igog-Jangam folded zone in the vicinity of Goesan town where Ogcheon group distributes. The geology is composed of Gyemyungsan formation, Daehyangsan quartzite, Munjuri formation and Hwanggangri formation of Ogcheon group unknown age in descending order, and porphyritic biotite granite and dyke rocks that intruded into the Ogcheon group. The study revealed that Igog-Jangam folded zone is a plunged synclinal fold based on the following evidences; 1) Some pebbles in Hwanggangri formation at Minaemi-gol (a name of village) consists of phyllite of Munjuri formation. 2) The pebble bearing phyllitic bed in this area, Hwanggangri formation was recognized as the uppermost member in Ogcheon group instead of the basal one of the group. 3) A crest of anticlinal fold has been appeared near the Goegang bridge as a structural counter-part of that of the present area. 4) The study of lineation of minor fold in Munjuri formation also suggests that Igog-Jangam folded zone manifests to be a synclinal structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.123-127
• /
• 2004

A printed folded-monopole antenna for portable wireless applications is presented. The proposed design is based on the folded quarter-wave antennas, which have a conductor plate having two arms. A prototype antenna is fabricated according to the simulation result. The obtained antenna can perform in 2.4GHz band and be adopted for laptop applications. All the measurements are performed in the actual test fixture.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.317-324
• /
• 1998

A nonlinear anile element formulation of flat shell elements with drilling d.o.f, is presented for the geometrical nonlinear analysis of thin-walled structures. The shell element to be applied in finite element analysis was developed by combining a membrane element named as CLM with drilling rotation d.o.f, and plate bending element. The combined shell element possesses six degrees of freedom per node. The element showed the excellent performance in the linear analysis of the folded plate structures, in which the normal rotational rigidity of folded plates is considered, therefore, using this element geometrical nonlinear analysis of those structures is fulfilled in this study. An incremental total Larangian approach is adopted through out in which displacements are referred to the original configuration. Comparing the results with those of other researches shows the performance of this element and a folded plate structure is analyzed as an example.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.258-265
• /
• 1998

Application of the flat shell element with drilling D.O.F to linear buckling analysis of thin-walled structures is presented in this paper. The shell element has been developed basically by combining a membrane element with drilling D.O.F. and Mindlin plate bending element. Thus, the shell element possesses six degrees-of-freedom per node which, in addition to improvement of the element behavior, permits an easy connection to other six degrees-of-freedom per node elements(CLS, Choi and Lee, 1995). Accordingly, structures like folded plate and stiffened shell structure, for which it is hard to find the analytical solutions, can be analyzed using these developed flat shell elements. In this paper, linear buckling analysis of thin-walled structures like folded plate structures using the shell elements(CLS) with drilling D.O.F. to be formulated and then fulfilled. Subsequently, buckling modes and the critical loads can be output. Finally. finite element solutions for linear buckling analysis of folded plate structures are compared with available analytic solutions and other researcher's results.

• International Journal of Contents
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.768-776
• /
• 2014

Using a simplified high-frequency small-signal equivalent circuit model for BSIM3 MOSFET, the fully differential two-stage folded-cascode CMOS operational amplifier is analyzed to obtain its small-signal voltage transfer function. As a result, the expressions for dc gain, five zero frequencies, five pole frequencies, unity-gain frequency, and phase margin are derived for op amp design using design equations. Then the analysis result is verified through the comparison with Spice simulations of both a high speed op amp and a low power op amp designed for the $0.13{\mu}m$ CMOS process.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.16-20
• /
• 2011

In this paper, we designed and implemented an internal multi-band folded monopole antenna for mobile handset. The proposed antenna covers Global System for Mobile Communications (GSM900: 880~960 MHz), Digital Communications System (DCS: 1710~1880 MHz), US-Personal Communications Service (US-PCS: 1850~1990 MHz), Bluetooth(2400~2484 MHz), WiMAX(3400~3600 MHz), and Wireless Local Area Network (WLAN: 5150~5350 MHz, 5725~5875 MHz) band for Voltage Standing Wave Ratio $(VSWR)\;{\le}\; 3$. The measured peak gains of the implemented antenna are -1.78dBi at 920MHz, 2.72dBi at 1795MHz, 2.25dBi at 1920MHz, 2.34dBi at 2442MHz, 2.11 dBi at 3550MHz, and 2.04 dBi at 5250MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.893-895
• /
• 2013

In this paper, we propose the planar folded monopole antenna with an inverted T-shape notch in ground plane. The proposed antenna is not only varied to a width of inner and outer patch lines to broaden bandwidth, but also it is inserted to a modified inverted T-shape notch with the same length of horizontal and vertical slit, difference of its width is about twice in the ground plane to broaden bandwidth. It is designed and simulated.