• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.689-697
• /
• 2005

The soil nailing system at permanent slope reinforcement is used with various facing methods in Korea. Also, pressure-injected grout technique is variously applied to many structures. However, most design of the pressure-injected grout technique have been carried out empirically because of complicated mechanisms associated with the behavior of surrounding soils and the hardening process of cement grout. Therefore this study, a newly modified soil nailing technology named as the PGSN (Pressure Grouting Soil Nailing) system with fabric form is developed to increase the global stability. Up to now, the PGSN system has been estimated mainly focusing on an establishment of the design procedure. In the present study, numerical study are carried out to evaluate potential failure surface and minimum factor of safety including facing stiffness and expanded radius of cemented grout by SSR (Shear Strength Reduction) technique. Also, results of numerical analysis are carried out for the typical section of soil nails slope using $FLAC^{2D}$ program for expanded effective radius by pressure grouting.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.1-6
• /
• 2009

Recently power plants and oil refineries are focusing on capacity enlargement for better efficiency through higher temperature and higher pressure. Thickness of boiler tubes becomes lessened due to oxidation and erasion caused by high temperature bums gas flowing over tubes outside. Accordingly, mechanical stress of tubes is increasing and that is a critical factor to make a crack and fracture. To prevent those sorts of accidents, aging assessment for proper periodic repair and replacement should be conducted reliably and reasonably. We performed IIT test on Cr-Mo steel, one of the most heat-resistant materials for facilities in power plants, and we report the test result and the considerable effectiveness of IIT test.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1468-1476
• /
• 2006

The goal of this thesis is to support safety and reliability characteristics of software intensive critical systems. The verification method developed is innovative from current state of the art in what concerns the verification viewpoint adopted: focusing on software faults, and not, like many other approaches purely on fulfilling functional requirements. As a first step and based on a number of well defined criteria a comparison was made of available literature in the area of static non formal non probabilistic software fault removal techniques. But, None of the techniques evaluated fulfilled all criteria set in isolation. Therefore a new technique was developed based on a combination of two existing techniques: the FMEA and FTA. These two techniques complement each other very well. It is possible to integrate both techniques with commonly used techniques at system level. The resulting new technique can be shown to combine nearly all aspects of existing fault removal techniques.

• Journal of Fashion Business
• /
• v.11 no.3
• /
• pp.133-151
• /
• 2007

The role of fabric now directly related with the expression of the beauty of clothing and it provides new and creative ideas. This study was aimed at reviewing basic data that can be used in systematic design development through fabric expression for today's fashion designers who must study unique, original fashion design development. For systematic development of design technique through fabric expression, fabric expression methods and characteristics, aesthetic characteristics and fabric design of 'art to wear' were reviewed and the results are as follows. First, the highly wrought fabric expression of art to wear was confirmed to be comprehending a message within itself. Second, aesthetic characteristics of fabric expression used in art to wear can be classified as decorativeness, extensity, 2-D pictorialness, handicraft, compounding and rearrangement, and 3-D characteristics. Third, the 6 aesthetic characteristics have unique design features and aesthetic categories. The understanding the fabric expression techniques through study on the classification of the fabric expression in 'art to wear' is expected to be extended to proposition of creative direction and inspiration of modern fashion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1356-1376
• /
• 2023

Software effort estimation is one of the most difficult tasks in software development whereas predictability is also of equal importance for strategic management. Accurate prediction of the actual cost that will be incurred in software development can be very beneficial for the strategic management. This study discusses the latest trends in software estimation focusing on analogy-based techniques to show how they have improved the accuracy for software effort estimation. It applies the standard deviation technique to the expected value of analogy-based estimates to improve accuracy. In more than 60 percent cases the applied technique of this study helped in improving the accuracy of software estimation by reducing the Magnitude of Relative Error (MRE). The technique is simple and it calculates the expected value of cost or time and then uses different confidence levels which help in making more accurate commitments to the customers.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.114-121
• /
• 2009

Ultrasonic guided waves have been widely utilized for long range inspection of structures. Especially, development of array guided waves techniques and its application for long range gas pipe lines(length of from hundreds meters to few km) were getting increased. In this study, focusing algorithm for array guided waves was developed in order to improve long range inspectability and accuracy of the array guided waves techniques for long range inspection of gas pipes, and performance of the developed techniques was verified by experiments using the developed array guided wave system. As a result, S/N ratio of array guided wave signals obtained with the focusing algorithm was increased higher than that of signals without focusing algorithm.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.633-642
• /
• 2005

Ubiquitous computing system is about networked processors, which is constructed with one or more computers interconnected by the networks. However, traditional security solution lacks a Proactive maintenance technique because of its focusing on developing the qualitative detection and countermeasure after attack. Thus, in this paper, we propose a quantitative assessment modeling technique, by which the general infrastructure can be improved and the attacks on a specific infrastructure be detected and protected. First of all, we develop the definition of survivality and modeling technique for quantitative assessment modeling with the static information on the system random information, and attack-type modeling. in addition, the survivality analysis on TCP-SYN attack and code-Red worm attack is performed for validating the proposed technique.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.245-252
• /
• 2022

Objective: This study aimed to investigate the abdominal muscle activity difference while performing the abdominal bracing technique focusing on inspiration (abdominal bracing group), the general abdominal bracing technique (general bracing group), and the abdominal hollowing technique (abdominal hallowing group) Design: A cross-sectional study design. Methods: Thirty-three healthy participants were recruited for this study. The participants were allocated to 3 different groups; Abdominal bracing group, general bracing group, and abdominal hallowing group. The surface electromyography was placed over the rectus abdominis, external oblique, and internal oblique muscles to collect the activation of abdominal muscles during the trial. Results: The muscle activity of the abdominal bracing group and general bracing groups was significantly higher in all abdominal muscles than in the abdominal hollowing group (p<0.05) Both rectus abdominis and external oblique muscles showed higher muscle activations in the abdominal bracing group over the general bracing group (p<0.05). However, the ratio of bilateral external obliques and rectus abdominis to bilateral internal obliques was highest when the hollowing technique was applied (p<0.05). Conclusions: The results of study showed the abdominal bracing technique that emphasized inhalation rather than the abdominal hollowing technique or general abdominal bracing technique increased the activity of the abdominal muscles. Therefore, this study is considered to be a data for effective training if the abdominal bracing technique that emphasizes inhalation is applied as a method to increase the activation of the abdominal muscles.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.7-13
• /
• 2009

This paper presents a circularly symmetric point spread function (PSF) estimation technique for a fully digital auto-focusing system. The proposed algorithm provides realistic, unsupervised PSF estimation by establishing the relationship between one-dimensional ideal step response and two-dimensional circularly symmetric PSF.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.51-60
• /
• 1988

A data transform is performed by using a point-electrode focusing method in order to obtain accurate and objective interpretation of the borehole normal resistivity data. Two new synthetic curves can be generated through the data transform. The one is an approximate apparent resistivity curve, which would be used to predict the true resistivity of the formation. The other one is a bed boundary coefficient curve, which would be used to distinguish bed boundaries. The accuracy of the normal data interpretation can be improved and this method takes much less computational time than a linear inversion technique. Moreover, this method does not require an initial guess model and limitation of number of unknown parameters. Since this algorithm can be run on a personal computer, an immediate interpretation would be possible at the field work site. If an additional set of electrodes(a=125cm)is attached to a normal resistivity tool which is being used (a=25cm, 50cm, 100cm), the apparent resistivity for the point-electrode focusing device can be calculated, and it would maximize the use of short and long normal resistivity data and promote the accuracy of the interpretation.