• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.174-185
• /
• 2012

The purpose of this study is to suggest planning strategy of tenant mix for UEC based on the final result of tenant mix analysis of five different research cases. The following is the comprehensive explanation about the result of tenant mix planning strategy for UEC currently in operation and when planning a new facility. First, overall research cases in this study show the tendency of following an old tradition, which stresses direct sales focusing on retail and dining adaptation. In order to compensate the defect, it is suggested to adopt new type of tenants with the functional mix of retail and dining with entertainment rather than decreasing the proportion of retail and dining tenant and increasing it of entertainment tenant. Second, the floorplan of UEC should adopt racetrack or circuit form that can stimulate shoppers' circular movement so to expose them to as much tenants as possible. Service consumption mode related tenants are required to place on the side or the edge of UEC, while retail consumption mode related tenants should be planned in the center. Among dining consumption mode related tenants, impulse dining tenants like a coffee shop should be placed at the turning point or at the end of the pathway, destination tenants like a restaurant and a food court, on the other hand, is needed to be placed in the center of the space. In case of Entertainment related tenants, destination tenants like bookstore or multiplex should also be placed at the end of the pathway, and on the way to those tenants, it is required to place general tenants that can share target customers with them. On the contrary, game center or record shop like tenants that can stimulate impulse sales should be placed on the visitor's main move or near the other destination tenants. Third, anchor tenants play an important role in gathering people to the UEC, and then induce them to visit the other tenants that are located near the anchors. Thus it is suggested to plan to place general tenants on the same floor as anchor tenants are placed so they can share the characteristics of target customers which create synergy effect.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.18-26
• /
• 2024

This paper describes the results of a study on Generic Quad Tilt Rotor UAM aircraft, focusing on nonlinear mathematical modeling and the development of real-time simulation software. In this research, we designed a configuration for a Generic Quad Tilt Rotor eVTOL UAM aircraft based on NASA's UAM mission requirements. We modeled the aerodynamics using a database, the prop-rotor dynamics with a thrust database, and included a ground reaction and atmospheric model in the flight model. We defined the control concept for various modes(helicopter mode, transition mode, and airplane mode), derived tilt angle corridors, and formulated flight control requirements. The resultant real-time flight simulation software not only performs trim analysis for Tilt Rotor UAM aircraft but also predicts handling qualities, optimizes tilt angle scheduling based on dynamic characteristics, designs and validates flight control laws for helicopter, transition, and airplane modes, and facilitates flight training through simulator integration.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.257-265
• /
• 2009

Recent progress in development of CMOS power amplifiers for mobile terminals is reviewed, focusing first on switching mode power amplifiers, which are used for transmitters with constant envelope modulation and polar transmitters. Then, various transmission line transformers are evaluated. Finally, linear power amplifiers, and linearization techniques, are discussed. Although CMOS devices are less linear than other devices, additional functions can be easily integrated with CMOS power amplifiersin the same IC. Therefore, CMOS power amplifiers are expected to have potential applications after various linearity and efficiency enhancement techniques are used.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4E
• /
• pp.120-124
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using a PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF- TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of the focusing transducer with center frequency of approximately 35MHz fabricated in this study showed very wide bandwidth, which could give an axial spatial resolution better than $30{\mu}m$ in B-mode image for biological tissues.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.695-702
• /
• 2003

Recent experimental and theoretical advances on the aromatic alcohol-water clusters are reviewed, focusing on the structure of the hydrogen bonding between the alcoholic OH group and the binding water molecules. The interplay of experimental observations and theoretical calculations for the elucidation of the structure is demonstrated for phenol-water, benzyl alcohol-water, substituted phenol-water, naphthol-water and tropolone -water clusters. Discussion is made on assigning the role (either proton-donating or -accepting) of the hydroxyl group by measuring the shifts of infrared frequency of the OH stretching mode in the cluster from that of bare aromatic alcohol for the experimental determination of the cluster structure.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.311-314
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using the PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF-TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of a center frequency approximately 40MHz focusing transducer fabricated in this study showed very wide bandwidth which could give an axial spatial resolution better than 30um in the B-mode image for biological tissues.

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.93-101
• /
• 2008

The rare metals, used for semiconductors, PDP-LCS and other specialized metal areas necessarily, has been playing a key role for the Korean economic development. Rare metals are influenced by exogenous variables, such as production quantity, price and supplied areas. Nowadays the supply base of rare metals is threatened by the sudden increase in price. For the stable supply of rare metals, a rational demand outlook is needed. In this study, focusing on the domestic demand for chromium, the uncertainty and probability materializing from demand and price is analyzed, further, a demand forecast model, which takes into account various exogenous variables, is suggested, differing from the previously static model. Also, through the OOS(out-of-sampling) method, comparing to the preexistence ARIMA model, ARMAX model, multiple regression analysis model and ECM(Error Correction Mode) model, we will verify the superiority of suggested model in this study.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.160-165
• /
• 2008

Fluid loading of a vibrating cylindrical shell can change natural frequencies and vibration magnitudes of the shell and a vibrating cylindrical shell can also change acoustic pressure of fluid. The vibroacoustics of fluid-filled cylindrical shells need the coupled solution of Helmholtz equation and governing equation of a cylindrical shell with boundary conditions. This paper proposed the wall impedance of fluid-filled axisymmetric cylindrical shells, focusing on the inner fluid/shell interaction. To propose the impedance, shell displacements used the linear combination of in vacuo shell modes. Acoustic pressure prediction of fluid used Kirchchoff-Helmholtz Integral equation with Green function of the plane mode. For the demonstration of the proposed results, numerical applications on mufflers were conducted.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.972-978
• /
• 1989

Proposed is improved compact self-mixing type semiconductor-laser range finder, which measures mode-hop time interval (MHI). Measurement error caused by the fluctuation of MHI is greatly reduced by averaging many contiguous MHI's. The main cause of measurement error 1.5% at ranges from 0.1m to 0.8m is attributed to the optical phase change of a returned light from a focusing lens. Accuracy improvement by stabilization of the returned light is suggested.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.220-221
• /
• 2000

본 연구에서 목표로 하는 집속광학계는 레이저 다이오드의 emitting area가 50$mu extrm{m}$$\times$1.0$\mu\textrm{m}$ 이고 pumping 매질인 crystal의 TE $M_{00}$ mode 발생을 위한 최소 입사빔의 단면도가 단축과 장축의 직경이 각각 206$\mu\textrm{m}$, 204$\mu\textrm{m}$인 타원이어야 하기 때문에 수직 방향으로는 200배 수평 방향으로는 4배의 확대를 할 수 있는 광학계 이어야 한다. 일반적으로 레이저 다이오드용 집속광학계는 레이저다이오드의 수직 수평 emitting area가 다르기 때문에 실린더형, 원통형 또는 toroidal형의 렌즈를 조합하여 구성한다. 그러나 우리의 경우는 emitting area의 수직 수평비 즉 집속광학계의 수직 수평의 굴절능( power )의 비가 50:1 이어야 하기 때문에 그림1과 같은 일반적인 실린더형, 원통형 또는 toroidal형의 렌즈의 조합으로 집속광학계를 구성하기에는, 렌즈 power비를 50:1로 하기 위해 필요로 하는 공간이( 첫번 렌즈와 마지막 렌즈까지의 거리 ) 커지는 점, 필요로 하는 렌즈의 매수가 많아지는 점, 집속 beam의 형상 즉 단면의 이심률이 커져서 pumping에 비효율적이라는 점 등에서, 부적절하다. (중략)략)