• 한국컴퓨터그래픽스학회논문지
• /
• 제12권4호
• /
• pp.23-32
• /
• 2006

최근 들어 디지털 카메라의 대중화로 인하여 많은 사람들이 손쉽게 다량의 사진을 촬영할 수 있게 되었다. 수백 장의 사진을 수작업으로 분류, 관리하는 것은 매우 힘든 일이며, 따라서 이를 자동으로 수행해주는 시스템의 필요성이 증대되었다. 디지털 이미지를 분류하는 이전 연구들은 대부분 일반적인 사진에 중점을 두고 있기 때문에 디지털 사진을 분류하기 위해서는 사용하기 힘들다. 최근에는 특정 조건 내에서 디지털 이미지를 분류하는 연구들이 많이 진행되고 있다. 이 알고리즘들은 대부분 시간차를 이용하여 사진을 분류하며 대부분 좋은 결과를 보이고 있지만 개선해야할 여지가 많이 남아있다. 예를 들면 초점거리와 같은 정보들은 사진을 분류할 때 전혀 사용하지 않는다. 따라서 본 논문에서는 EXIF의 초점거리 정보를 이용한 사진 분류 알고리즘을 제안한다. 본 논문에서는 매칭 벡터 분석방법을 이용하여 사진을 분류한다. 제안한 방법으로 실험한 결과, 95%의 사진 분류 성공률을 보였다.

• 방송공학회논문지
• /
• 제28권1호
• /
• pp.31-41
• /
• 2023

재생하고자 하는 3차원 이미지에서 발현되는 빛의 간섭 무늬를 계산하여 얻게 되는 Computer Generated Hologram(CGH)은 본래의 3차원 이미지와 유사관계를 찾기 힘든 형태로 형성되기에 직접적인 초점 위치 혹은 크기 등의 변환이 어려운 것으로 알려져 있다. 본논문은 이러한 문제 중 하나인 다중 평면으로 구성된 3차원 이미지 CGH의 평면별 초점 거리를 변환하는 문제를 해결하는 기술을 제안한다. 제안하는 기술은 CGH로부터 재생되는 3차원 이미지를 여러 각도에서 관측한 2차원 이미지의 집합으로 구성된 Light-Field (LF) 이미지로 변환하고, 관측한 각도별로 이동하는 객체의 위치를 객체 탐지 알고리즘인 YOLOv5(You Only Look Once version 5)로 분석한 뒤, 이를 조절함으로써 초점 거리가 변환된 LF 이미지와 이를 역변환한 결과인 CGH를 생성한다. 해당 기술은 CGH의 픽셀 사이즈가 3.6 ㎛, 해상도가 3840⨯2160인 상황에서 10 cm 거리에 재생되는 상에 적용되어 영상 품질의 큰 손실 없이 약 3 cm 정도의 범위에서 초점 거리를 변환시킬 수 있음을 시뮬레이션 분석과 실제 실험 관측을 통해 확인하였다.

• 한국광학회지
• /
• 제15권3호
• /
• pp.268-273
• /
• 2004

종광선구면수차를 목표값으로 최적화하여 가변동공을 가지는 정밀모형안을 설계하였다. 설계된 모형안에서 종광선구면수차를 이론적으로 동공직경 1 mm에서 8 mm까지 도식화하고, 다른 모형안의 값들과 비교하였다. 또한 파장에 따른 종광선색수차를 계산하고, 다른 값들과 대조하였다. 정밀모형안에서 얻은 유효초점거리 15.842 mm를 사용하여 환산모형안의 광학상수를 결정하였다. 환산모형안의 광학상수들은 등가굴절능 63.12 Diopter, 환산면 곡률반경 5.281 mm, 굴절률 1.33333, 안축길이 21.123 mm이다.

• 천문학회지
• /
• 제37권5호
• /
• pp.527-531
• /
• 2004

It is argued that the key task in understanding magnetic fields in the cosmos is to comprehend the origin of their order or coherence over large length scales in galaxies. Obtaining magnetic fields can be done in stars, whose lifetime is usually $10^{10}$ rotations, while galactic disks have approximately 20 to 50 rotations in their lifetime since the last major merger, which established the present day gaseous disk. Disorder in the galactic magnetic fields is injected on the disk time scale of about 30 million years, about a tenth of the rotation period, so after one half rotation already it should become completely disordered. Therefore whatever mechanism Nature is using, it must compete with such a short time scale, to keep order in its house. This is the focal quest.

• 전기학회논문지P
• /
• 제54권3호
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.

• 한국광학회지
• /
• 제7권3호
• /
• pp.200-206
• /
• 1996

When a Gaussian beam is incident to a planar dielectric interface at an angle other than Brewster angle or the critical angle of total reflection, we derive the six nonspecular effects of rotation, lateral shift, focal shift, Rayleigh length change, magnitude and phase changes in the complex amplitude of the reflected beam simultaneously by taking account of the boundary condition. In the derivation we assume a Gaussian beam of fundamental mode to emerge from the interface and then match at the interface the constant, linear, and quadratic variations of the amplitude and phase of the reflected beam with those of the incident beam multiplied by the reflection coefficient. Our calculation shows that the six nonspecular effects can result from a linear variation of the natural logarithm of the reflection coefficient at the interface.

• 한국전산유체공학회지
• /
• 제4권3호
• /
• pp.35-43
• /
• 1999

In this study, the shock wave focusing of an elliptic reflector is numerically simulated by solving the Euler equations. The numerical method is the second order upwind TVD scheme with a finite volume discretization. For the verification of the present method, we simulate the moving shock wave passing through a two-dimensional corner. The computed isopycnics are compared with the earlier experiment. Numerical results of the elliptic reflectors show that the density and pressure at the focusing point increase linearly as the aspect ratio of the reflector becomes deep. On the other hand, the gas dynamic focal length decreased with the increase of the reflector aspect ratio.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.169-176
• /
• 2001

Defect of apple was depreciated the product value and causes storage disease seriously. To detect the defect of ‘Fuji’apple with machine vision system, the optical characteristics of defect should be investigated. In this research, absorbance spectra of defect were acquired by spectrophotometer in the range of visible and NIR region(400∼1,100nm) and L*a*b* color values were also acquired by colorimeter. NIR machine vision system was constructed with B&W camera, frame grabber, 16 tungsten-halogen lamps, variable focal length lens and NIR bandpass filter which was mounted to lens outward. Average gray values of defect at 15 NIR wavelength were acquired and the significant NIR wavelength was selected by comparing Mahalanobis distance between sound and defective apple. As the result of Mahalanobis distance analysis, the significant wavelength to discriminate the defectives in ‘Fuji’apple were found to be 720nm for scab and 970nm for bruise and cuts and 920nm was also effective regardless of defective types.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.76-82
• /
• 1997

The discrimination of flaw shape and sizing is very important subject in the material evaluation for semiconductor and new materials. The aim of this paper is to investigate the spectrum analysis of artificial defect signal captured from steel ball embedded in the resin. The results show that it can be evaluated quantitatively the size of artificial defect, from the amplitude variation of same frequency if the probe with same diameter and focal length is used. Comparing with the amplitude variation of the high frequency component and low frequency component obtained from the distance of defect center position, it can be estimated steel ball and flat bottm defect.

• 대한치과의사협회지
• /
• 제36권2호통권345호
• /
• pp.135-143
• /
• 1998

Cephalogram is one of the most important tool in researching growth and development of craniofacial area, orthodontic diagnosis and treatment planning. But its inherent distortion of actual length and angles during projecting three dimensional object to two dimensional plane might cause errors in quantitative analysis of shape and size. three dimensional high quality images can be obtained using computerized tomogram and have reported in literatures. Considering its expenses and amount of exposure to radiation, limitations still remain to be solved in its application to routine practice. construction of three dimensional image using principle of orientator can be obtained by biplanar stereoradiography. Theoretically two images, lateral and P-A can be used to construct three dimensional image provided that those are taken at same time by two different focal spots. As two images(lateral and P-A) obtained by conventional cephalogram have different head posture, those need compensation to construct three dimensional images. This study introduced principle of computerized head posture compensation and showed that conventional cephalogram could be used to construct three dimensional image and could be applied to routine orthodontic practice.