• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.396-403
• /
• 2000

A thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main part of the system is a thermal camera in which a focal plane array typed sensor is introduced. The sensor detects the mid-range infrared spectrum of target objects and then it outputs a generic video signal which should be processed to form a frame thermal image. Here, a digital signal processor(DSP) is applied for the high speed processing of the sensor signals. The DSP controls analog-to-digital converter, performs correction algorithms and outputs the frame thermal data to frame buffers. With the frame buffers can be generated a NTSC signal and transferred the frame data to personal computer(PC) for the analysis and a monitoring of the thermal scenes. By performing the signal processing functions in the DSP the overall system achieves a simple configuration. Several experimental results indicate the performance of the overall system.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.86-94
• /
• 2016

In this paper, position control of focal plane compensation device using piezoelectric actuator is conducted. The forcal plane compensation device installed on earth observation satellite camera compensates micro-vibration from reaction wheels. In this study, four experimental models of the open-loop compensation device are derived using MATLAB system identification toolbox in the input range of 0~50Hz. Subsequently, the PID controller for each model is designed and the performance test of each controller is conducted through MATLAB/Simulink. According to frequency response analysis of the closed-loop compensation device system, the PID controller designed for 38~50Hz input range has enough tracking performance for the whole 0~50Hz input range. The maximum output error is about $1{\mu}m$ for the input range. The simulation results has been verified by the experimental method.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.23-30
• /
• 2015

The focal plane image stabilization for a camera is one of the most effective method that can increases the digital camera's image quality by compensating the vibration disturbance. The optical image stabilization can be implemented by making the focal plane to trace the path of incident light. To control the position of focal plane motion compensating stage precisely, a nonlinear control algorithm has been applied by considering coulomb friction which is nonlinear behavior of the compensator system. In our study, we have analyzed the hand shaking vibration using the gyro sensor, and made a mathematical model of compensating stage containing optical sensor and piezo-actuator. Then the nonlinear control algorithm has been designed and its performance has been verified by experiment. In this study, a friction driven peizo-electric actuator with $1{\mu}m$ resolution and 10mm/s speed has been used for stage movement.

• Journal of Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.502-511
• /
• 2009

In order to simulate a depth-of-field effect in real world, there have been several researches in computer graphics field. It can represent an out-of-focused scene by calculating focal plane. When a point in a 3D coordinate lies on further or nearer than focal plane, the point is presented as a blurred circle on image plane according to the characteristic of the aperture and the lens. We can generate a realistic image by simulating the effect because it provides an out-of-focused scene like human eye dose. In this paper, we propose a method to calculate a disparity value of a viewer using a customized stereoscopic eye-tracking system and a GPU-based depth-of-field control method. They enable us to generate more realistic images reducing side effects such as dizziness. Since stereoscopic imaging system compels the users to fix their focal position, they usually feel discomfort during watching the stereoscopic images. The proposed method can reduce the side effect of stereoscopic display system and generate more immersive images.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.87-92
• /
• 2002

We present a simple experimental method for determination of limiting intrinsic fixed-pattern non-uniformity (NU) due to fabrication process in two-dimensional CCD multiplexers (MUXs) that are used for hybrid focal plane arrays. Here, this is done by determining separately the two NUs viz. that are $V_T$ dependent and $V_T$ independent. From these measurements, process dependent NU can be extracted. It is argued that $V_T$ dependent NU can be eliminated by designing novel input circuits whereas $V_T$ independent NU, primarily, dependent on process control and material variations may be reduced but cannot be eliminated completely and hence limits the FPA performance eventually.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.472-478
• /
• 2015

This paper describes the design of the active optical compensation movements(at focal plane, secondary mirror) for the image stabilization of a small satellite camera. The movements can correct optical misalignment on-line and directly compensate vibration disturbances in the focal plane. Since the devices are installed inside the space camera, it has an remarkable advantage to deal with the structural deformation of a space camera effectively. In this paper, the requirements of the active optical compensation movements for 1m GSD small satellite camera have been analyzed. Based on the established requirements, the design of the active compensation movements have been conducted. The designed active optical compensation system can control 5 axes movements independently to compensate micro-vibration disturbances in the focal plane and to refocus the optical misaligned satellite camera.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.76.2-76.2
• /
• 2013

SPICA(SPace Infrared Telescope for Cosmology and Astrophysics) is an infrared space observatory with cooled telescope of 3 m aperture. Because of its large aperture, near- and mid-infrared instruments onboard SPICA require fine guidance with attitude accuracy less than 0.1 arcsecond. The FPC-G is a focal plane camera to achieve this high attitude accuracy and KASI is leading its development. The SPICA project is now under the Risk Mitigation Phase 2 (RMP2) and one of major risks is to satisfy the requirement of pointing and attitude control. To assess the impacts of disturbance sources on the attitude control and devise methods to mitigate possible risks, a software simulator of the FPC-G is under the development. In this presentation, we report the status of development of the simulator and the development plan during the RMP2.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1001-1008
• /
• 2001

This paper presents a new camera calibration algorithm for ill-conditioned cases in which the camera plane is nearly parallel to a set of non-coplanar calibration boards. for the ill-conditioned case, most of existing calibration approaches such as Tsais radial-alignment-constraint method cannot be applied. Recently, for the ill-conditioned coplanar calibration Lee&Lee[16] proposed an iterative algorithm based on the least square method. The non-coplanar calibration algorithm presented in this paper is an iterative two-stage procedure with extends the previous coplanar calibration algorithm. Through the first stage, camera, position and orientation parameters as well as one radial distortion factor are determined optimally for a given data of the scale factor and the focal length. In the second stage, the scale factor and the focal length are locally optimized. This process is repeated until any improvement cannot be expected any more Computational results are provided to show the performance of the algorithm developed.

• Journal of ILASS-Korea
• /
• v.12 no.4
• /
• pp.191-197
• /
• 2007

This study presents in-line digital particle holography and its application to spray droplets to measure the characteristics of spray droplets. Several important parameters at the time of hologram recording such as the object distance and the region of laser beam used were verified. The correlation coefficient method with important parameters such as the reconstruction interval and the correlation interval was used for determination of the focal planes of particles. The optimal values of all these parameters are obtained by either numerical simulation of holograms or experiments. Using these optimal parameters, double pulse digital spray holograms in a short time interval were recorded with the synchronization system for the time control. The spatial positions of droplets that are used for the evaluation of the three dimensional droplet velocities can be easily located, which proves the feasibility of the digital holographic technology for measurements of several important features of spray droplets.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.38-45
• /
• 2010

A new readout circuit involving a pixel-level reset control was studied for 2-D long wavelength infrared focal plane arrays. The integration time of each pixel can be optimized individually and automatically. Hence, the readout circuit has a wide dynamic range and good signal-to-noise ratio characteristics. The readout circuit was fabricated with a $0.35{\mu}m$ 2-poly 4-metal CMOS process for a $128{\times}128$ long wavelength infrared HgCdTe array with a pixel size of $50{\mu}m{\times}50{\mu}m$. The smart reset control with two-step background suppression improves the signal-to-noise ratio to 87dB and the dynamic range to 95.8dB.