일본 훗카이도와 그 주변 지역의 238개의 관측소에서 관측한 깊이 0~300km내에서 일어난 4050개의 지진 중 P파 64,024개와 5파 64,618개를 Kim과 Bae(2004)에 의해 개발된 3 성분 토모그래피에 이용하였다. Vp/Vs의 속도 이상대가 훗카이도와 그 주변 지역에서 명확하게 나타났다. Double Seismic Zone(DSZ)의 Seismic Planes는, 훗카이도 주변에서 지진 위험도가 높게 나타나는, 40~80Km의 깊이에서 훗카이도 아래로 태평양판이 섭입하는 것이 발견되었다. 모호 불연속면아래에서 높은 Vp/Vs 이상대의 발견은 Moriya(1994)에 의해 제안된, 쿠릴 열도(Okhotsk Plate 혹은 North American Plate)가 NE 일본 열도(Amurian Plate 혹은 Eurasian Plate)와 충돌하고, 동시에 태평양판이 훗카이도의 Central Tectonic Axis($142^{\circ}{\sim}143^{\circ}E$)와 Hikada Mountain Range(HMR) Corner를 따라 지체구조력의 균형을 이루는 두 개의 판 아래로 섭입하고 있는, 표면 삼중 충돌 가설의 증거이다. 낮은 Vp와 Vs는 장력을 나타내는 지진 메커니즘의 표현인 Central Tectonic Axis을 따라 동쪽과 서쪽에서 발견되었다. 이들 현상은 이 지역에서의 낮은 부게 중력 이상값과 일치한다. 이것은 왜 큰 지진의 대부분이 훗카이도의 3개의 지체구조력의 3중 접합점에 의해 지체구조력의 균형이 깨어지는, 훗카이도 바깥쪽에서 일어나는지 알 수 있다.
The Main payload of the STSAT-3 (Korea Science & Technology Satellite-3), MIRIS (Multipurpose Infra-Red Imaging System) has been developed for last 3 years by KASI, and its Flight Model (FM) is now being developed as the final stage. All optical lenses and the opto-mechanical components of the FM have been completely fabricated with slight modifications that have been made to some components based on the Engineering Qualification Model (EQM) performances. The components of the telescope have been assembled and the test results show its optical performances are acceptable for required specifications in visual wavelength (@633 nm) at room temperature. The ensuing focal plane integration and focus test will be made soon using the vacuum chamber. The MIRIS mechanical structure of the EQM has been modified to develop FM according to the performance and environment test results. The filter-wheel module in the cryostat was newly designed with Finite Element Analysis (FEM) in order to compensate for the vibration stress in the launching conditions. Surface finishing of all components were also modified to implement the thermal model for the passive cooling technique. The FM electronics design has been completed for final fabrication process. Some minor modifications of the electronics boards were made based on EQM test performances. The ground calibration tests of MIRIS FM will be made with the science grade Teledyne PICNIC IR-array.
Quantum wells infrared photodetectors (QWIPs) have been used to detect infrared radiations through the principle based on the localized stated in quantum wells (QWs) [1]. The mature III-V compound semiconductor technology used to fabricate these devices results in much lower costs, larger array sizes, higher pixel operability, and better uniformity than those achievable with competing technologies such as HgCdTe. Especially, GaAs/AlGaAs QWIPs have been extensively used for large focal plane arrays (FPAs) of infrared imaging system. However, the research efforts for increasing sensitivity and operating temperature of the QWIPs still have pursued. The modification of heterostructures [2] and the various fabrications for preventing polarization selection rule [3] were suggested. In order to enhance optical performances of the QWIPs, double barrier quantum well (DBQW) structures will be introduced as the absorption layers for the suggested QWIPs. The DBWQ structure is an adequate solution for photodetectors working in the mid-wavelength infrared (MWIR) region and broadens the responsivity spectrum [4]. In this study, InGaAs/GaAs/AlGaAs double barrier quantum well infrared photodetectors (DB-QWIPs) are successfully fabricated and characterized. The heterostructures of the InGaAs/GaAs/AlGaAs DB-QWIPs are grown by molecular beam epitaxy (MBE) system. Photoluminescence (PL) spectroscopy is used to examine the heterostructures of the InGaAs/GaAs/AlGaAs DB-QWIP. The mesa-type DB-QWIPs (Area : $2mm{\times}2mm$) are fabricated by conventional optical lithography and wet etching process and Ni/Ge/Au ohmic contacts were evaporated onto the top and bottom layers. The dark current are measured at different temperatures and the temperature and applied bias dependence of the intersubband photocurrents are studied by using Fourier transform infrared spectrometer (FTIR) system equipped with cryostat. The photovoltaic behavior of the DB-QWIPs can be observed up to 120 K due to the generated built-in electric field caused from the asymmetric heterostructures of the DB-QWIPs. The fabricated DB-QWIPs exhibit spectral photoresponses at wavelengths range from 3 to $7{\mu}m$. Grating structure formed on the window surface of the DB-QWIP will induce the enhancement of optical responses.
Rukdee, Surangkhana;Park, Chan;Kim, Kang-Min;Lee, Sung-Ho;Chun, Moo-Young;Yuk, In-Soo;Oh, Hee-Young;Jung, Hwa-Kyoung;Lee, Chung-Uk;Lee, Han-Shin;Rafal, Marc D.;Barnes, Stuart;Jaffe, Daniel T.
Journal of Astronomy and Space Sciences
/
제29권2호
/
pp.233-244
/
2012
The Korea Astronomy and Space Science Institute and the Department of Astronomy at the University of Texas at Austin are developing a near infrared wide-band high resolution spectrograph, immersion grating infrared spectrometer (IGRINS). The compact white-pupil design of the instrument optics uses seven cryogenic mirrors, including three aspherical off-axis collimators and four flat fold mirrors. In this study, we introduce the optomechanical mount designs of three off-axis collimating mirrors and one flat slit-viewer fold mirror. Two of the off-axis collimators are serving as H and K-band pupil transfer mirrors, and are designed as system alignment compensators in combination with the H2RG focal plane array detectors in each channel. For this reason, the mount designs include tip-tilt and parallel translation adjustment mechanisms to properly perform the precision alignment function. This means that the off-axis mirrors' optomechanical mount designs are among the most sensitive tasks in all IGRINS system hardware. The other flat fold mirror is designed within its very limitedly allowed work space. This slit-viewer fold mirror is mounted with its own version of the six-point kinematic optics mount. The design work consists of a computer-aided 3D modeling and finite element analysis (FEA) technique to optimize the structural stability and the thermal behavior of the mount models. From the structural and thermal FEA studies, we conclude that the four IGRINS mirror mounts are well designed to meet all optical stability tolerances and system thermal requirements.
We are currently investigating the feasibility of a 1.6 m telescope with a laser-guide star adaptive optics (AO) system. The telescope, if successfully commissioned, would be the first dedicated adaptive optics observatory in South Korea. The 1.6 m telescope is an f/13.6 Cassegrain telescope with a focal length of 21.7 m. This paper first reviews atmospheric seeing conditions measured over a year in 2014~2015 at the Bohyun Observatory, South Korea, which corresponds to an area from 11.6 to 21.6 cm within 95% probability with regard to the Fried parameter of 880 nm at a telescope pupil plane. We then derive principal seeing conditions such as the Fried parameter and Greenwood frequency for eight astronomical spectral bands (V/R/I/J/H/K/L/M centered at 0.55, 0.64, 0.79, 1.22, 1.65, 2.20, 3.55, and $4.77{\mu}m$). Then we propose an AO system with a laser guide star for the 1.6 m telescope based on the seeing conditions. The proposed AO system consists of a fast tip/tilt secondary mirror, a $17{\times}17$ deformable mirror, a $16{\times}16$ Shack-Hartmann sensor, and a sodium laser guide star (589.2 nm). The high order AO system is close-looped with 2 KHz sampling frequency while the tip/tilt mirror is independently close-looped with 63 Hz sampling frequency. The AO system has three operational concepts: 1) bright target observation with its own wavefront sensing, 2) less bright star observation with wavefront sensing from another bright natural guide star (NGS), and 3) faint target observation with tip/tilt sensing from a bright natural guide star and wavefront sensing from a laser guide star. We name these three concepts 'None', 'NGS only', and 'LGS + NGS', respectively. Following a thorough investigation into the error sources of the AO system, we predict the root mean square (RMS) wavefront error of the system and its corresponding Strehl ratio over nine analysis cases over the worst ($2{\sigma}$) seeing conditions. From the analysis, we expect Strehl ratio >0.3 in most seeing conditions with guide stars.
본 논문에서는 3차원 영상 획득을 위한 LADAR(LAser Detection And Ranging)용 광수신기 모듈을 설계-제작하고 측정한 결과를 보고한다. 광수신기 모듈은 1 km 이상의 거리에서도 신호를 측정할 수 있도록 디지털모드(Geiger Mode)에서 동작하는 InGaAs APD(Avalanche Photodiode)로 설계하였으며, $16{\pm}16$ FPA(Focal Plane Array)로 설계-제작하였다. 디지털모드(Geiger Mode)는 항복전압 이상의 영역에서 동작하여 작은 광에 대해 반응 할 수 있게 큰 증폭률을 가지게 된다. 1ns의 FWHM(Full Width at Half Maximum)을 갖는 펄스를 수광할 수 있고, 배열 크기는 $16{\pm}16$, Geiger Mode 동작 등의 특성을 만족하도록 광수신기를 구성하기 위해 ROIC(Read Out Integrated Circuit)를 자체적으로 설계-제작하였다. 제작된 광수신기 모듈은 원거리 표적정보 획득이 가능하며, PDE(Photon Detection Efficiency)는 28%, DCR(Dark Count Rate)은 140 kHz 이하의 특성을 보였으며, LADAR 시스템에서 3차원 영상을 획득하였다. 이는 $16{\pm}16$ FPA APD를 이용한 광수신기에서 가장 우수한 특성을 나타낸 것이다.
이 연구는 초등학교 수준에서 '선'의 학습 내용 즉, 선분, 직선, 반직선 등의 학습 내용과 학습 계열을 분석하였다. 수학과 교육과정 및 수학 교과서에서 1차부터 7차까지, 그 이후 2007 개정, 2009 개정, 2015 개정, 2022 개정에 이르기까지 각 시기에 선분, 직선, 반직선을 도입하는 시기와 그 표현을 통하여 학습 내용을 분석하였고, 그 학습 순서 및 활동 중점을 통하여 학습 계열을 분석하였다. 학습 내용의 도입 시기와 정의 방식의 변화 분석에서 본다면, 선분, 직선, 반직선을 주로 2차원 평면도형의 그 구성 요소로서 즉, 다각형의 변이나 각의 변으로서 다루어왔지만, 수학과 교과서에 비추어 볼 때 기초 도형으로서 선분, 직선, 반직선이라는 다양한 선을 탐색할 기회가 부족하였다. 둘째, 선분, 직선, 반직선의 정의에서 점과 선의 관계 설정 및 선들 사이의 관계 설정에 따라 개념 형성에 영향을 주며 이들을 비교하여 그 장단점을 교수학습 관련 연구 및 근거들이 요구된다. 셋째, 선분에서 곧은 선(최단거리)의 아이디어와 직선과 반직선에서 끝없이 나아가는 선(무한성)의 아이디어는 수학의 핵심적인 아이디어로서, 생활 주변의 여러 사물에서 선의 개념을 형성하고 점차 구체적인 선을 이상화하여 유클리드 기하의 도형으로 나아가도록 상상하고 경험하는 활동이 필요하다.
Jae Sok Oh;Chan Park;Kang-Min Kim;Heeyoung Oh;UeeJeong Jeong;Moo-Young Chun;Young Sam Yu;Sungho Lee;Jeong-Gyun Jang;Bi-Ho Jang;Sung-Joon Park;Jihun Kim;Yunjong Kim;Andrew Szentgyorgyi;Stuart McMuldroch;William Podgorski;Ian Evans;Mark Mueller;Alan Uomoto;Jeffrey Crane;Tyson Hare
천문학회지
/
제56권2호
/
pp.169-185
/
2023
The GMT-Consortium Large Earth Finder (G-CLEF) is the first instrument for the Giant Magellan Telescope (GMT). G-CLEF is a fiber feed, optical band echelle spectrograph that is capable of extremely precise radial velocity measurement. G-CLEF Flexure Control Camera (FCC) is included as a part in G-CLEF Front End Assembly (GCFEA), which monitors the field images focused on a fiber mirror to control the flexure and the focus errors within GCFEA. FCC consists of an optical bench on which five optical components are installed. The order of the optical train is: a collimator, neutral density filters, a focus analyzer, a reimager and a detector (Andor iKon-L 936 CCD camera). The collimator consists of a triplet lens and receives the beam reflected by a fiber mirror. The neutral density filters make it possible a broad range star brightness as a target or a guide. The focus analyzer is used to measure a focus offset. The reimager focuses the beam from the collimator onto the CCD detector focal plane. The detector module includes a linear translator and a field de-rotator. We performed thermoelastic stress analysis for lenses and their mounts to confirm the physical safety of the lens materials. We also conducted the global structure analysis for various gravitational orientations to verify the image stability requirement during the operation of the telescope and the instrument. In this article, we present the opto-mechanical detailed design of G-CLEF FCC and describe the consequence of the numerical finite element analyses for the design.
목적 개회충 척수염의 자기공명영상 10예를 보고하고, 개회충 척수염 진단에 도움이 되는 다양한 영상 소견을 분석하고자 한다. 대상과 방법 2015년 6월부터 2018년 3월까지 본원에서 개회충 척수염으로 진단받은 환자들을 대상으로 의무기록과 촬영한 척추 자기공명영상 소견을 척추영상 전문의 1명과 영상의학과 전공의 1명이 후향적으로 분석하였다. 결과 본 연구는 개회충 척수염의 자기공명영상 소견을 다음 두 가지로 분류하였다. 먼저 type 1은 축상면에서 중심부, 미만성 T2 고신호강도가 보이는 경우로 50%가 해당되며 모든 환자에서 병변의 뚜렷한 조영증강이 있었으며 대부분의 경우(4예, 80%)에서 후외측 또는 후방의 결절성 조영증강을 보였다. Type 2는 후외측 혹은 후방에서 쐐기 모양 또는 국소적 T2 고신호강도의 병변이 보이는 경우로 분류하였으며, 50%에 해당한다. 이 경우 병변의 범위가 상대적으로 작았고 조영증강은 1예에서만 관찰되었다. 결론 개회충 척수염의 자기공명영상이 다양한 소견으로 나타날 수 있음을 확인하였고 이를 통해 개회충 척수염의 자기공명영상 소견을 2가지로 분류하여 제시하였다.
1999년에 발사될 다목적실용위성1호의 주 탑재체인 전자광학카메라는 한반도의 디지털 지도(입체지도 포함) 작성을 위한 영상자료를 획득하는 것을 그 임무로 하고있다. 센서부와 전자부로 구성된 전자광학카메라는 파장 510∼730nm의 가시광선영역에서 6.6m의 지상해상도와 관측 폭 17km 이상의 흑백영상을 위성체 자세제어에 의한 조준과 푸쉬브룸 방식으로 촬영한다. 3년 이상의 임무수명을 가진 본 기기의 고해상도 흑백영상 촬영시간은, 98분인 위성궤도 당 2분간 연속 수집되어 그 지상영상의 길이는 800km에 이르며, 운용 중 프로그래밍이 가능한 이득률과 옵셋, 그리고 자체 내에 영상을 저장할 수 있는 기능을 갖고 있다. F수 8.3인 비차폐 3면 반사식 광학계에 의해 수집된 영상은 각각 8 bit 전자신호로 처리되어 25Mbps의 송신율을 가지고 지상국으로 보내진다. 제작된 전자광학카메라는 각종 시험을 통하여, 그 설계에서 요구되었던 기술사양을 만족하거나 능가할 정도로 높은 완성도를 보이고 있는데, 본 논문에서는 전자광학카메라로 획득된 영상자료의 최종 사용자들을 위하여 그 분광특성, MTF(Modulation Transfer function), 2592개 CCD 화소의 상대적 반응비등의 중요 성능특성 측정값을 설명하였다. 이득율을 변화시키며 측정한 분광특성 결과는 전자광학카메라의 영상자료 사용자가 더 정확한 흑백영상을 만드는데 이용되리라 본다. 영상품질을 가름하는 중요한 특성인 MTF는 시계각 전부에 걸쳐 Nyquist 진동수에서 측정값이 요구값 10%를 넘어 16% 이상을 보이므로써 이 전자광학카메라가 우수한 성능을 가진 것이 입증되었고, 각 CCD 화소들의 상대적 반응도를 측정한 결과에서도 상당히 고른 특성을 확인함과 함께, 차후 전자광학카메라의 영상자료 처리과정을 위하여 정밀한 상대 비교값을 제공하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.