• 펄프종이기술
• /
• 제32권3호
• /
• pp.25-31
• /
• 2000

It is required to use substantial amount of wet strength resin for producing multi-functional mulch papers since these paper products shold maintain its strength properties when they exposed to outdoor weather for several months. While producing mulch papers it is usual to observe significant amount of foam at white water silo. Thus it is imperative to use defoaming or antifoaming agents. In this study diverse defoaming and antifoaming agents have been tested for their effective-ness in eliminating foams that produced. It was shown that combined use of a silicone type defoamer and a fatty acid type anti-foaming agent was msot effective in eliminating foams. These chemicals were used in trial production of mulch papers and their influence on paper-making wet end system was examined including one pass retention cationic demand con-ductivity pH etc. It was found that the defoaming agents were very effective for removing foams in trial production. Tensile strengths of the mulch papers produced were significantly greater than commericial mulch papers produced in Japan.

• 한국가스학회지
• /
• 제20권2호
• /
• pp.30-34
• /
• 2016

본 연구에서는 LNG나 LPG등과 같은 초저온용 단열재로 사용되는 폴리우레탄 폼을 대체하기 위한 연구의 일환으로 레졸형 페놀수지를 사용하여 페놀 폼을 합성하였다. 페놀 수지 발포 폼을 합성하기 위해 HCFC-141b, HFC-365mfc와 HFC-227fa의 혼합물, n-pentane, cyclopentane, n-hexane 및 cyclohexane을 발포제로 사용하여 발포제에 따른 페놀수지 폼의 물성변화를 고찰하였다. 발포제로 cyclohexane을 사용하였을때 가장 우수한 단열성능과 압축강도를 나타내었으며 동일한 발포제를 사용하여 합성한 폴리우레탄 폼과의 내열성을 비교한 결과 폴리우레탄 폼에 비해 매우 우수한 내열성을 나타내었다.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.283-288
• /
• 2003

Alkaline powder cleaning agents (APCAs) were prepared by blending of $Na_2CO_3$ tetrasodium pyrophosphate (TSPP). sodium orthosilicate (Na-OSi), Na-dioctyl sulfosuccinate (303C), Demol C, and MJU-100A (100A). The physical properties of APCAs tested with steel specimen showed the following results. The cleaning powers of APCA-6 ($Na_2CO_3$ 250g/TSPP 70g/Na-OSi 40g/303C 60g/Demol C 50g/100A 30g mixture) for press-rust preventing oil was 97% and 98% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively; for Quenching oil, the cleaning power of APCA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From the results, it was ascertained that APCA-6 exhibited a good cleaning power. Also low foaming power tests proved that the APCA-6 maintained good defoaming effect.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.218-223
• /
• 2008

In order to obtain crosslinked poly(butylene succinate) (PBS) foams with a closed-cell structure, a commercial-grade PBS was first modified in the melt using two different branching agents to increase the melt viscosity. The rheological properties of the branched and crosslinked PBS were examined by varying the amount of the branching agents. The complex viscosity of the crosslinked PBS increased with increasing amount of the branching agent. However, it decreased with increasing frequency. When 2 phr of the branching agent was added to PBS, the storage modulus (G') was higher than the loss modulus (G") throughout the entire frequency range, showing that the addition of a branching agent increases the melt viscosity and elasticity of PBS effectively. Closed-cell PBS foams were prepared by mixing the chemical blowing agent with the crosslinked PBS. The effect of the foaming conditions such as temperature and time, and the amount of the crosslinking agent on the structure of the expanded PBS foams were also investigated.

• 한국환경과학회지
• /
• 제29권1호
• /
• pp.119-122
• /
• 2020

The effects of liquid potassium permanganate (KMnO₄) on the litter quality of poultry were investigated. Two-hundred-forty 0-day-old broiler chickens (Arbor Acres) were randomly assigned to two treatments with four replicated pens of 30 chickens each. Treatment liquid KMnO₄ at a rate of 50 g of liquid KMnO₄/kg of poultry litter was sprayed onto the litter surface using a small hand pump; others served as a control that was applied without liquid KMnO₄ additions. Compared with controls, the treatment liquid KMnO₄ showed no differences in pH, total nitrogen and ammonia concentration. It was concluded that liquid KMnO₄ did not significantly increase poultry litter quality. Mechanisms relating to increasing litter pH and ammonia using liquid KMnO₄ are an oxidant agent (not acid-foaming agents).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.11-15
• /
• 1990

Results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced fly ash-cement composites are presented in this paper. The carbon fiber reinforced fly ash-cement composites using silica powder and a small amount of Ethylene vinyl acetate emulsion are prepared with carbon fiber, foaming agents and curing conditions. As a result, the manufacturing process technology of carbon fiber reinforced fly ash-cement composites is developed. And the mechanical properties such as compressive, tensile and flexural strengths and drying shrinkage of lightweight carbon fiber reinforced fly ash-cement composites are improved by using a small amount of Ethylene vinyle acetate emulsion. The development and applications of precast products and the design systems of lightweight carbon fiber reinforced fly ash-cement composites are expected in the near future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.38-39
• /
• 2018

Foame concrete was used to reduce insulation problems and interlayer noise in slab. There have been no studies on the physical properties of foaming agents using foamed concrete,Only the physical properties of foamed concrete mixed with foam agent. It is judged that the density and distribution of Foams will be changed when the pressre is changed when the bubble is formed. In this study to investigate the changes of Foam density and the physical performance of foamed concrete by changing the pressure during Foam formation.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.235-241
• /
• 2006

Mullite short fibers have been fabricated by adapting the Kneading-Drying-Calcination (KDC) process and characterized. The effect of the addition of foaming agent and calcination temperature on the formation of mullite fibers from coal fly ash, was examined. In the present work, ammonium alum $NH_4Al(SO_4)_2\;12H_2O$ synthesized trom coal fly ash and sodium phosphate $Na_2HPO_4\;2H_2O$ were used as foaming agents. After calcination at $1300^{\circ}C$ for 10 h and then etching with 20% HF solution at $50^{\circ}C$ for 5 h using a microwave heating source, the alumina-deficient $(AI_2O_3/SiO_2$ = 1.13, molar ratio) orthorhombic mullite fibers with a width of ${\sim}0.8mm$ (aspect ratio >30), were prepared from the coal fly ash with $AI_2O_3/SiO_2$ = 0.32, molar ratio by the addition of $NH_4AI(SO_4)_2\;12H_2O$, and with further addition of 2 wt% sodium phosphate. The excessive addition of sodium phosphate rather decreased the formation of mullite fibers, possibly due to the large amount of liquid phase prior to mullitization reaction.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.40-44
• /
• 2003

Soil-borne infectious disease including Pythium aphanidermatum and Rhizoctonia solani causes severe damage to plants, such as cucumber. This soil-borne infectious disease was not controlled effectively by chemical pesticide. Since these diseases spread through the soil, chemical agents are usually ineffective. Instead, biological control, including antagonistic microbe can be used as a preferred control method. An efficient method was developed to select an antagonistic strain to be used as a biological control agent strain. In this new method, surface tension reduction potential of an isolate was included in the ‘decision factor’ in addition to the other factors, such as growth rate, and pathogen inhibition rate. Considering these 3 decision factors by a statistical method, an isolate from soil was selected and was identified as Bacillus sp. GB16. In the pot test, this strain showed the best performance among the isolated strains. The lowest disease incidence rate and fastest seed growth was observed when Bacillus sp. GB16 was used. Therefore this strain was considered as plant growth promoting rhizobacteria (PGPR). The action of surface tension reducing component was deduced as the enhancement of wetting, spreading, and residing of antagonistic strain in the rhizosphere. This result showed that new selection method was significantly effective in selecting the best antagonistic strain for biological control of soil-borne infectious plant pathogen. The antifungal substances against P. aphanidermatum and R. solani were partially purified from the culture filtrates of Bacillus sp. GB16. In this study, lipopeptide possessing antifungal activity was isolated from Bacillus sp. GB16 cultures by various purification procedures and was identified as a surfactin-like lipopeptide based on the Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), high performance liquid chromatography mass spectroscopy (HPLC-MS), and quadrupole time-of-flight (Q-TOF) ESI-MS/MS data. The lipopeptide, named GB16-BS, completely inhibited the growth of Pythium aphanidermatum, Rhizoctonia solani, Penicillium sp., and Botrytis cineria at concentrations of 10 and 50 mg/L, respectively. A novel method to prevent the foaming and to provide oxygen was developed. During the production of surface active agent, such as lipopeptide (surfactin), large amount of foam was produced by aeration. This resulted in the carryover of cells to the outside of the fermentor, which leads to the significant loss of cells. Instead of using cell-toxic antifoaming agents, low amount of hydrogen peroxide was added. Catalase produced by cells converted hydrogen peroxide into oxygen and water. Also addition of corn oil as an oxygen vector as well as antifoaming agent was attempted. In addition, Ca-stearate, a metal soap, was added to enhance the antifoam activity of com oil. These methods could prevent the foaming significantly and maintained high dissolved oxygen in spite of lower aeration and agitation. Using these methods, high cell density, could be achieved with increased lipopeptide productivity. In conclusion to produce an effective biological control agent for soil-borne infectious disease, following strategies were attempted i) effective screening of antagonist by including surface tension as an important decision factor ii) identification of antifungal compound produced from the isolated strain iii) novel oxygenation by $H_2O_2-catalase$ with vegetable oil for antifungal lipopeptide production.

• 한국화재소방학회논문지
• /
• 제33권3호
• /
• pp.51-55
• /
• 2019

CFC의 오존층 파괴로 인해 이를 대체할 냉매, 세정제, 발포제의 개발과 더불어 소방분야에서는 할론대체소화약제개발에 주력하여 왔다. 특히 소화기분야에서는 할론1211 소화기를 대체할 청정소화약제를 개발하여 왔다. 그 결과로 개발된 소화기용 청정소화약제 중 가장 널리 사용되는 소화약제가 HCFC-123이다. 대부분의 청정소화약제들은 자체 증기압이 약하기 때문에 어떠한 가압원을 사용할 것인가가 중요한 문제 중 하나이다. 본 연구에서는 소화기용 소화약제들 중 HCFC-123, HCFC-124, HFC-125, Novec-1230을 선정하여 이들 약제에 대한 가압원으로 보조소화효과를 기대할 수 있는 CO₂를 사용하였다. 각 소화약제별로 약제량과 CO₂량을 조절하며 시험을 실시한 결과 HCFC-123 소화약제로부터 기대한 소화효과를 확인할 수 있었다. 현재 시중에 판매되고 있는 소화기인 HCFC-123 2.5 kg을 질소로 가압하여 소화능력 ABC 각 1단위인 소화기보다 소화약제가 적은 HCFC-123 1.5 kg과 CO₂ 1.5 kg을 혼합한 소화기로 동일한 소화능력시험에 성공하였다. 이러한 소화시험의 결과는 가압원인 CO₂의 보조소화효과를 확인한 것이라 할 수 있다. 이는 중간대체물질로 분류되어 있는 HCFC계열의 소화약제를 줄일 수 있어 기존의 소화기보다 친환경적이고 경제적이라 할 수 있으며 B,C급 화재용 소화기인 CO₂ 소화기로 A급 가연물이 많은 전기, 전자 관련 시설을 방호하는 불합리함을 해결하는데 기여할 수 있으리라 기대한다.