• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.420-427
• /
• 2022

본 연구는 국내 생산 발포유리 골재를 활용하여 단열바닥기초로 활용하기 위해, 발포유리 골재로 구성된 단열부의 물리역학적 특성 및 열적특성을 평가하였다. 평가 결과, 압축강도는 기존 유기단열재인 XPS, EPS 등에 비해 높은 40.6 N/cm²로 나타났으며, 열전도율은 0.84 W/mK로 나타났다. 또한 단열바닥구조를 모사한 시험체의 열관류율은 0.37 W/m²K로 나타나 실제 발현되는 발포유리 골재의 열전도율은 0.80 W/mK으로 평가되었다. 본 연구를 통해 발포유리 골재를 사용한 단열바닥구조의 활용가능성을 확인할 수 있었다.

• Advances in materials Research
• /
• 제12권4호
• /
• pp.331-349
• /
• 2023

Foam concrete can be considered as environmental friendly material due to its low weight, its minimal cost and a possibility to add waste materials in its production. This paper investigates the possibility of producing foam concrete with waste glass as powder and aggregate. Then, the effect of using waste glass on strength and drying shrinkage of foam concrete was examined. Also, the effect of incorporating polypropylene fibers (12 mm length and proportion of 0.5% of a mix volume) on distribution of waste glass as coarse particles within 1200 kg/m³ foam concrete mixes was evaluated. Waste glass was used as powder (20% of cement weight), as coarse particles (25%, 50% and 100% instead of sand volume) and as fine particles (25% instead of sand volume). From the results, the problem of non-uniform distribution of coarse glass particles was successfully solved by adding polypropylene fibers. It was found that using of waste glass as coarse aggregate led to reduce the strength of foam concrete mixes. However, using it with polypropylene fibers in combination helped in increasing the strength by about 29- 50% for compressive and 55- 71% for splitting tensile and reducing the drying shrinkage by about (31- 40%). In general, not only the fibers role but also the uniformly distributed coarse glass particles helped in improving and enhancing the strength and shrinkage of the investigated foam concrete mixes.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.414-422
• /
• 2013

As structure-borne sound, the floor impact sound is one of the serious noises in residential building. Most of heating system applied to the typical Korean residential building is floor heating system which is called ondol. The ondol usually consists of finishing material, mortar with heating coil, light-weight aerated concrete and reinforced concrete. This study focused on the isolation of heavy-weight impact sound and modification of mortar and light-weight aerated concrete. Specifically the glass foam aggregate was added on light-weight aerated concrete. Also, water-cement ratio and amount of cement on mortar were revised. The sound pressure level of heavy-weight impact was measured in reverberation chamber using both bang-machine and impact ball. The size of specimen was 1 m by 1 m. Substitution ratio of glass foam aggregate on light-weight aerated concrete shows relationship with heavy-weight impact sound pressure level. In addition, heavy-weight impact sound pressure level was decreased with increment of water-cement ratio and amount of cement on mortar.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.74-79
• /
• 2022

본 연구에서는 고강도 콘크리트 및 시멘트 복합체의 밀실한 내부 구조로 인한 급격한 내부 습도 저하 및 수화도 저하 등의 영향을 파악하고자 하였다. 내부 Si 수화도 변화 검증을 위해 폐유리발포비드를 경량골재로 사용하였으며, 중장기에 걸쳐 내부 미반응 수화물의 저감 및 수화물 형성 경향을 파악하였다. 폐유리발포비드는 5, 10, 20 % 혼입되었으며 프리웨팅하여 사용하였다. 폐유리발포비드의 혼입률이 증가함에 따라 강도는 감소하는 경향을 보였다. 이와 함께 XRD 분석, TGA 분석 및 Si NMR 분석을 통해 프리웨팅된 폐유리발포비드의 혼입량이 내부에 증가할 때, 페이스트에 수분이 공급되는 것으로 내부 Si의 수화 정도는 달라지는 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.687-688
• /
• 2010

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.51-52
• /
• 2023

Recently, heat island and dry island phenomena occur frequently due to land surface development and excessive energy consumption in urban areas. As a result, the surface temperature of the building and the entire temperature of its surroundings are increased, and as a result, the durability of the building is rapidly deteriorated. In order to suppress these causes, a method of maintaining the temperature of road heating wires was implemented as a temporary measure, but this did not predict climate change. Therefore, this study is a method to measure the compressive strength, density, and thermal conductivity of light weight concrete using waste glass foam beads. After fabricating a simple chamber, the temperature and humidity of the inside and outside were measured with an Arduino device in consideration of external factors. Therefore, if waste glass foam beads made through proper mixing are constructed in the urban center, the quality of the urban can be improved.