• 한국컴퓨터그래픽스학회논문지
• /
• 제27권4호
• /
• pp.11-24
• /
• 2021

본 논문에서는 액체 시뮬레이션에서 표현되는 거품 효과(Foam effects)를 노이즈 없이 디테일하게 표현할 수 있는 인공신경망 프레임워크를 제안한다. 거품 입자의 생성 위치와 이류는 기존의 스크린 투영법을 활용하여 계산되며, 이 과정에서 나타나는 노이즈 문제를 인공신경망을 통해 풀어낸다. 스크린 투영 접근법에서 중요한 것은 투영맵이지만 이산화된 스크린 공간에 운동량을 투영하는 과정에서 투영맵에 노이즈가 발생하며, 우리는 인공신경망 기반의 디노이징(Denoising) 네트워크를 활용하여 이 문제를 효율적으로 풀어낸다. 투영맵을 통해 거품 생성 영역이 선별되면 2D를 3D 공간으로 역변환하여 거품 입자를 생성한다. 우리는 작은 크기의 거품들이 소실되는 기존의 디노이징 네트워크 문제를 해결하였다. 뿐만 아니라, 제안하는 알고리즘을 스크린 공간 투영 프레임워크와 통합함으로써 이 접근법이 갖는 모든 장점을 그대로 수용할 수 있다. 결과적으로 깔끔한 거품 효과 뿐만 아니라, 디노이징 과정으로 인해 소실된 거품을 안정적으로 표현할 수 있는지 다양한 실험을 통해 보여준다.

• 소성∙가공
• /
• 제11권8호
• /
• pp.701-709
• /
• 2002

Aluminium foam material is highly porous material, which has the complicated cellular structure defined by randomly distributed pores in metallic matrix. This structure gives the characteristic properties which cannot be achieved by any other conventional processes. As the properties of aluminium foam material significantly depend on its porosity, a desired profile of properties can be tailored by changing the foam density. But various defects lead to undesirable effects on the mechanical properties. Mechanical properties are dependent on cell sizes and aspect ratios. Therefore, this paper presents the effects of various processing parameters of various parameters on the mechanical properties. For the sake of this, combined stirring was used to fabricate aluminum foam materials by the parameters. Compression and bending tests were performed to investigate the effects of cell sizes and aspect ratios on the mechanical properties.

• 한국세라믹학회지
• /
• 제15권4호
• /
• pp.185-192
• /
• 1978

The effects of slag prticle size, $Na_2SO_4$ addition and sulphide in slag to the foam formation was investigated. This investigation showed that the slag particle size and the amount of $Na_2O$ had produced effects on the size of the foam, foam distribution and firing temperatures. In addition to that the amount of sulphide loss during the firing was controlling factor for the foam formation. The smaller slag particles and higher firing temperatures increased the loss of sulphide in the slag. The addition of $Na_2SO_4$ in the slag batch was likely to inhibit the foam formation. The larger slag particles resutled in the larger foam size and tended to be increasing the batch firing temperature. The main constituents of slag formed glass consisted of wallstonite and glassy phase. It is believed that the controlling the slag particle size and the amount of $Na_2SO_4$ in the slag batch will probably be main factors in foam formation.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1263-1271
• /
• 2001

An experimental study is carried out for an aluminum foam heat sink attached to an isolated heat source to evaluate high potential of aluminum foam as a heat sink with impinging jets. The effects of the pore density and the height of the aluminum foam heat sink, the jet Reynolds number, and the nozzle diameter are delineated in comparison with a conventional pin type heat sink. It is found that the aluminum foam with small pores is inefficient for the heat transfer enhancement due to the large flow friction at the given porosity. In the parameter ranges of the present study, the change in the nozzle diameter shows no significant effects on the surface temperature of the aluminum foam heat sink at a given Reynolds number. The heat transfer enhancement is strongly dependent on the jet Reynolds number and shows a maximum value at a moderate Reynolds number.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1145-1156
• /
• 2016

To study the effects of foam core density and face-sheet thickness on the mechanical properties and failure modes of aluminum foam sandwich (AFS) beam, especially when the aluminum foam core is made in aluminum alloy and the face sheet thickness is less than 1.5 mm, three-point bending tests were investigated experimentally by using WDW-50E electronic universal tensile testing machine. Load-displacement curves were recorded to understand the mechanical response and photographs were taken to capture the deformation process of the composite structures. Results demonstrated that when foam core was combined with face-sheet thickness of 0.8 mm, its carrying capacity improved with the increase of core density. But when the thickness of face-sheet increased from 0.8 mm to 1.2 mm, result was opposite. For AFS with the same core density, their carrying capacity increased with the face-sheet thickness, but failure modes of thin face-sheet AFS were completely different from the thick face-sheet AFS. There were three failure modes in the present research: yield damage of both core and bottom face-sheet (Failure mode I), yield damage of foam core (Failure mode II), debonding between the adhesive interface (Failure mode III).

• 대한가정학회지
• /
• 제11권1호
• /
• pp.26-43
• /
• 1973

This study was carried out on the Sewbility of Urethane Foam usually used as coldproof lining. The Sewability was estimated with the Puckering Grade and Seam Efficiency according to the thicknes of urethane foam, fineness and material of sewing thread, and the sort of covering fabric. The result shows the following ; 1. The thick foam proportinally shows the low Puckering Grade. 2. Effect on the sewability is small in fineness of sewing thread but large in material. Especially silk thread shows the greatest sewability in foam sewing. When the material of covering fabric is same as that of sewing thread (for example ; p/c fabric and p/c thread) the sewability is excellent in special. 3. Taffeta in covering foam is not suitable to foam sewing, satin and twill show superior sewability without reagrd to the thickness of foam. 4. In case of sewing foam covered with tricot, optimum thickness of foam and fineness of sewing thread through pretest must determine. 5. The thicker foam is the better seam efficiency tends, and Seam Efficiency largely effects to the strength of the sewing thread itself. 6. The seam Efficiency can heighten with the strength of sewing thread in proportion to that of covering fabric.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1932-1938
• /
• 2005

Graphite foams consist of a network of interconnected graphite ligaments and are beginning to be applied to thermal management of electronics. The thermal conductivity of the bulk graphite foam is similar to aluminum, but graphite foam has one-fifth the density of aluminum. This combination of high thermal conductivity and low density results in a specific thermal conductivity about five times higher than that of aluminum, allowing heat to rapidly propagate into the foam. This heat is spread out over the very large surface area within the foam, enabling large amounts of energy to be transferred with relatively low temperature difference. For the purpose of graphite foam thermosyphon design in electronics cooling, various effects such as graphite foam geometry, sub-cooling, working fluid effect, and liquid level were investigated in this study. The best thermal performance was achieved with the large graphite foam, working fluid with the lowest boiling point, a liquid level with the exact height of the graphite foam, and at the lowest sub-cooling temperature.

• 한국양식학회지
• /
• 제16권4호
• /
• pp.216-222
• /
• 2003

In a simulated seawater aquaculture system, effects of different operating factors like the superficial air velocity (SAY), hydraulic residence time (HRT), protein concentration and foam overflow height on the removal of total suspended solids (TSS) by a foam fractionator, with 20 cm diameter and 120 cm height, were investigated. This experiment was performed on batch and consecutive modes for different combinations of the tested factors, using synthetic wastewater. In 5 consecutive trials, TSS concentration in culture tank water decreased faster, when the foam fractionator was operated at higher SAV and lower HRT. In batch trials, with increasing SAV, TSS removal rate increased, but decreased with increasing HRT. Higher protein concentration in the bulk solution resulted in higher TSS removal rate. TSS concentration in the collected foam condensates increased but the foam overflow rate decreased with increasing foam overflow height. Foam fractionation was effective for removing TSS in seawater aquaculture systems and its performance largely depended on the operating parameters, especially superficial air velocity.

• 한국컴퓨터그래픽스학회논문지
• /
• 제23권2호
• /
• pp.29-39
• /
• 2017

본 논문에서는 효율적이고 사실적으로 수면거품과 웨이브거품을 표현할 수 있는 통합된 프레임워크를 제안한다. 이 프레임워크는 거품입자가 생성되어야 하는 곳을 결정할 때 발생하는 계산 복잡도를 줄이기 위해 3차원 공간의 물 입자들을 2차원 스크린 공간으로 투영하도록 설계되었다. 거품효과는 빠르고 복잡한 물의 흐름에서 생성되기 때문에, 가속도와 곡률 값을 분석하여 복잡한 유체의 흐름 패턴을 갖는 영역을 2차원에서 찾고 이를 3차공간으로 변환한다. 변환된 3차원 영역에서 거품입자가 방출되고, 각 거품입자는 속도가 따라 분류되며, 그 종류에 따라 다르게 이류됨으로써 웨이브거품의 본질적인 특징을 잘 포착해 낸다. 우리는 거품입자들을 두 가지 유형인 수면 거품과 웨이브거품으로 분류하여 결과적으로 거품의 사실감을 향상시킨다. 웨이브거품은 급류와 같은 부분에서 날카로운 웨이브패턴이 표현되는 특징이 있고, 수면거품은 느린 유속에서 뿌연 거품형태로 표현되는 특징이 있다. 이러한 특징을 표현하기 위해 거품입자의 속도와 위치를 올바르게 가이드해주는 기법을 제안한다. 또한 스크린공간의 밀도를 이용한 커널함수를 제안한다. 이 함수를 이용하여 거품입자의 속도와 위치를 올바르게 조정하여 불필요한 거품입자들을 효율적으로 제거하며, 결과적으로, 거품효과의 시각적인 손실없이 전반적인 메모리 효율성을 향상시켰다. 우리는 신빙성있는 실험결과를 보여주며 제안된 접근법은고품질의 결과를 제공하는 동시에 사용하기 쉽다는 장점이 있다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.234-237
• /
• 2001

In this study, efforts were made to understand the propagation of electromagnetic wave through the foam core sandwich structure by the analytical model. Foam core sandwich structure is composed of glass/epoxy composite skins and foam core. Transmittance and reflectance of the arbitrary linearly polarized incident TEM waves through the unidirectional composites, foam and foam core sandwich structures were determined as functions of thickness, fiber orientation of composites, incident angle and polarization angle by the analytical model. From the results of the analysis, the general tendency of transmittance and reflectance of electromagnetic wave through composites, foam and foam core sandwich structures was obtained.