• Title/Summary/Keyword: Fluoride containing gel

Search Result 24, Processing Time 0.031 seconds

Mechanical Properties and Ionic Conductivities of Plasticized Gel Polymer Electrolyte Based on P(VdF-co-HFP) (가소화된 P(VdF-co-HFP)계 고분자 전해질의 기계적 성질 및 이온전도도)

  • 최종국;김성훈
    • Polymer(Korea)
    • /
    • v.24 no.2
    • /
    • pp.259-267
    • /
    • 2000
  • Gel polymer electrolytes were prepared from poly(vinylidene fluoride-co-hexafluoro propylene)[P(VdF-co-HFP)] that had higher mechanical properties as well as higher dielectric constant ($\varepsilon$=8~13) than other polymeric matrix. Mechanical properties and ionic conductivities have been investigated as a function of blend ratio of electrolyte solution and polymer matrix. Ethylene carbonate (EC)/${\gamma}$-butyrolactone (${\gamma}$-BL) and lithium triflate (LiCF$_3$SO$_3$) were used as solvent and salt, respectively. The mechanical properties such as tensile strength, tensile modulus, compression modulus, and dynamic shear modulus were evaluated. The highest ionic conductivity was 1.09$\times$10$^{-3}$ S/cm for PVH40 containing 28.6 wt% of P(VdF-co-HFP) at $25^{\circ}C$. Tensile strength, tensile modulus and compression modulus were increased with P(VdF-co-HFP) content and abruptly changed between PVH70 and PVH80. Dynamic shear moduli showed a typical gel behavior and changed with shear strain.

  • PDF

Clinical Effect of MS Coat and Elmex gel on the Dentin Hypersensitivity following Periodontal Surgery (치주수술 후 지각과민증에 대한 MS Coat와 엘멕스 겔처치의 임상적 효과)

  • Park, Sung-Min;Lim, Sung-Bin;Chung, Chin-Hyung
    • Journal of Periodontal and Implant Science
    • /
    • v.31 no.4
    • /
    • pp.727-736
    • /
    • 2001
  • Dentinal hypersensitivity is one of the complicated symptom rather than a disease. It has special reaction or pain over uncovered root by heat, mechanical or chemical stimulations, which are normal with healthy teeth, The purpose of this study is to discover rather MS Coat (oxalate-containing pre-polymerized resin suspension) or Elmex gel(amine fluoride+sodium fluoride) is effective on hypersensitivity after periodontal treatment using NRS(Numerica1 Rating Scales), which it is useful for evaluating pain level. This study has been prepared in Dankook Dental Hospital with generally healthy adult who had been suffered from dentinal hypersensitivity after periodontal treatment. Divided in three groups with saline(control group), MS Coat(test 1 group) and Elmex gel(test 2 group). And then, following evaluations were made at the end of 1 minute, 1 week, 1 month and 3 months. 1. The sequence of higher frequency & severeness of hypersensitivity is water within $7^{\circ}C$, air stream & explorer. 2. As time goes on, 1 minute, 1 week, 1 month & 3 months, severeness of hypersensitivity scored lower with water, air stream and explorer. 3. With explorer, the differences among three groups as time had to seen. 4. With air stream, the sensitivity scored lower after 1min with MS Coat, Elmex, and saline sequence. As time goes on the sensitivity was lower with MS Coat and Elmex than saline, but there was no difference between MS Coat and Elmex. 5. With water in $7^{\circ}C$, the sensitivity was much decreasing with MS Coat and Elmex than saline, but there was no difference between MS Coat and Elmex. As the result, MS Coat and Elmex are effective on hypersensitivity caused by periodontal treatment.

  • PDF

Preparation and Gas Permeability Measurements of PVDF-HFP/Ionic Liquid Gel Membranes (PVDF-HFP/이온성 액체 겔 분리막 제조 및 기체 투과도 측정)

  • Ko, Youngdeok;Park, Doohwan;Baek, Ilhyun;Hong, Seong Uk
    • Applied Chemistry for Engineering
    • /
    • v.25 no.6
    • /
    • pp.559-563
    • /
    • 2014
  • It is well known that $CO_2$ can be dissolved easily in imidazolium-based room temperature ionic liquids (RTILs). Because of the high $CO_2$ solubility in RTILs, membranes containing RTILs can separate easily gas mixtures such as $CO_2/N_2$ and $CO_2/CH_4$. In this study, we prepared poly(vinylidene fluoride)-hexafluoropropyl copolymer (PVDF-HFP) gel membranes with several RTILs and measured permeabilities of several gases. When the anion of ionic liquids was tetrafluoroborate($BF{_4}^-$), both $CO_2$ permeability and selectivities decreased as the carbon number of the cation increased. When the cation of ionic liquids was 1-ethyl-3-methylimidazolium[emim], $CO_2$ permeability of gel membranes containing bis(trifluoromethane) sulfoneimide($Tf_2N^-$) anion was double compared to those containing tetrafluoroborate($BF{_4}^-$) anion. However, $CO_2/N_2$ and $CO_2/CH_4$ selectivities of the $Tf_2N^-$ case were decreased, whereas the $H_2$ selectivity was almost the same for two cases.

Effect of fluoride-containing gel on the roughness of a titanium surface and the promotion of bacterial growth (불소함유 겔이 티타늄 표면의 세균성 바이오필름 성장에 미치는 영향)

  • Kim, Sun-Jin;Lee, Jae-Kwan;Chang, Beom-Seok;Lee, Si-Young;Um, Heung-Sik
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.32 no.1
    • /
    • pp.16-23
    • /
    • 2016
  • Purpose: The aim of this study was to evaluate whether fluorides at various pH cause changes in the surface roughness of titanium implants that alter the adherence of bacterial biofilms. Materials and Methods: The titanium disks were assigned randomly to the following seven groups according to the fluoride agents and application time (1 minute or 30 minute) used: control (no treatment); group 1 (1.23% acidulated phosphate fluoride [APF] at pH 3.5 for 1 minute); group 2 (1.23% APF at pH 3.5 for 30 minute); group 3 (1.23% APF at pH 4.0 for 1 minute); group 4 (1.23% APF at pH 4.0 for 30 minute); group 5 (2% NaF gel at pH 7.0 for 1 minute); group 6 (2% NaF gel at pH 7.0 for 30 minute). The surface roughness of the titanium disks and the amount of adherent bacteria were measured. Results: Group 2 showed a significantly greater surface roughness than the control group (P < 0.0001). No significant differences in the amount of surface bacteria were observed between the treated samples and the controls. In addition, there were no significant differences in bacterial adherence relative to the incubation period between the treated samples and the controls. Conclusion: The surface roughness of the titanium disks was significantly greater after treatment with APF at pH 3.5 for 30 min compared with that of the controls. In addition, we found that the amount of Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibactor actinomycetemcomitans was similar among all groups

Purification and Characterization of a Keratinase from a Feather-Degrading Fungus, Aspergillus flavus Strain K-03

  • Kim, Jeong-Dong
    • Mycobiology
    • /
    • v.35 no.4
    • /
    • pp.219-225
    • /
    • 2007
  • A keratinolytic enzyme secreted by Aspergillus flavus K-03 cultured in feather meal basal medium (FMBM) containing 2% (w/v) chicken feather was purified and characterized. Keratinolytic enzyme secretion was the maximal at day 16 of the incubation period at pH 8 and $28^{\circ}C$. No relationship was detected between enzyme yield and increase of fungal biomass. The fraction obtained at 80% ammonium sulfate saturation showed 2.39-fold purification and was further purified by gel filtration in Sephadex G-100 followed by ion exchange chromatography on DEAE-Sephadex A-50, yielding an active protein peak showing 11.53-fold purification. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and zymograms indicated that the purified keratinase is a monomeric enzyme with 31 kDa molecular weight. The extracellular keratinase of A. flavus was active in a board range of pH ($7{\sim}10$) and temperature ($30^{\circ}C{\sim}70^{\circ}C$) profiles with the optimal for keratinase activity at pH 8 and $45^{\circ}C$. The keratinase activity was totally inhibited by protease inhibitors such as phenylmethylsulfonyl fluoride (PMSF), iodoacetic acid, and ethylenediaminetetraacetate (EDTA) while no reduction of activity by the addition of dithiothreitol (DTT) was observed. N-terminal amino acid sequences were up to 80% homologous with the fungal subtilisins produced by Fusarium culmorum. Therefore, on the basis of these characteristics, the keratinase of A. flavus K-03 is determined to be subtilisins-like.

Effect of Fluoridated Bleaching Agents and Post-treatment Fluoride Application on the Color and Microhardness of Enamel Surface (불소를 함유한 치아미백제가 치아 표면의 색과 미세경도에 미치는 영향)

  • Shim, Youn-Soo;Jung, Sang-Hee
    • Journal of dental hygiene science
    • /
    • v.10 no.4
    • /
    • pp.295-300
    • /
    • 2010
  • The aim of this study were to elucidate effects of fluoridated bleaching agents and post-treatment fluoride application on the color and microhardness of enamel surface. Twenty freshly extracted human adult molar were each sectioned into halves, the specimens divided and treated according to four experimental groups: 1, untreated controls: 2, treatment with 10% carbamide peroxide (CP) bleaching agent; 3, treatment with 10% CP containing 0.11% fluoride; 4, treatment with 10% CP followed by a 0.9% sodium fluoride gel application. Group 2-4 were compared with the baseline data. treated 8 h per day for 14 days then immersed in distilled water for 2 weeks. Changes in enamel color and microhardness were evaluated on Days 7 and 14. All the bleached enamel specimens revealed increased whiteness and overall color value. Groups 2 and 4 showed significantly decreased enamel microhardness compared to their baseline. The specimens treated with fluoridated bleaching agents showed relatively less reduction in enamel microhardness than those treated with nonfluoridated agents during the bleaching treatment. The addition of fluoride did not impede the tooth whitening. The fluoridated bleaching agents reduced the microhardness loss of enamel.

Purification and Characterization of Superoxide Dismutase from Pseudomonas polycolor

  • LEE SANG-OK;IL-CHUN SEO;SOOK-HYUN CHUNG;TAE-HO LEE
    • Journal of Microbiology and Biotechnology
    • /
    • v.3 no.3
    • /
    • pp.188-193
    • /
    • 1993
  • Superoxide dismutase (SOD) was purified from Pseudomonas polycolor to an electrophoretically homogeneous state and partially characterized. SOD was purified by ammonium sulfate fractionation, column chromatography on DEAE-Sephadex A-50, phenyl-Toyopearl 650 M, and gel filtration on Sephadex G-100. The molecular weight and subunit molecular weight of the purified enzyme were estimated to be 40, 000 and 20, 000, respectively. The purified enzyme remained stable at pH 9.0~11.0, $25^{\circ}C$ for 40 hr, but rapidly became inactive below 9.0. SOD was stable up to $45^{\circ}C$ at pH 9.0 with about 80% relative activity, but rapidly became inactive at temperature above that. The enzyme was insensitive to cyanide and fluoride, and sensitive to hydrogen peroxide and azide. The results suggest that the enzyme be an iron-containing SOD.

  • PDF

Characteristics of Microbial Pretense far Application to Abolished Protein Resource (폐단백자원에 이용하기 위한 미생물 Protease의 특성)

  • Chun, Sung-Sook;Cho, Young-Je;Sung, Tae-Soo;Son, Jun-Ho;Choi, Cheong
    • Applied Biological Chemistry
    • /
    • v.41 no.1
    • /
    • pp.6-12
    • /
    • 1998
  • To extract insoluble proteins and to improve functional properties of abolished proteins, a protease producing Aspergillus sp. MS-18 was isolated from soil. The enzyme was purified and its enzymological characteristics were investigated. It was found that production of protease reached to the maximum when the wheat brae medium containing, 3% arabinose, 0.5% polypepton, 0.1% $(NH_4)_2SO_4$ and 0.2% magnesium chloride was cultured for 3 days. Protease was purified 16.9 folds after ion exchange chromatography and gel filtration and the specific activity was 340.4 unit/mg. Purified enzyme was confirmed as a single band by the polyacrylamide gel electrophoresis. The molecular weight of protease was estimated to be 30,000. Crystalization form of purified protease was a stick shape with rounding edges. The optimum pH and temperature for the protease activity were 9.0 and $60^{\circ}C$, respectively. The enzyme was stable in pH 7.0-12.0 at $50^{\circ}C$. The activity of purified enzyme was inhibited by $Hg^{2+}$, $Cu^{2+}$, $Zn^{2+}$ and $Pb^{2+}$, whereas it was activited by $Na^+$, $Mg^{2+}$ and $Mn^{2+}$. The activity of the protease was inhibited by the treatment with ethylenediaminetetraacetic acid and phenylmethane sulfonyl fluoride. The result suggests that the purified enzyme is a serine protease with metal ion at active site. Km and Vmax of purified protease were $29.33\;{\mu}mole/L$ and $5.13\;{\mu}g/min$, respectively.

  • PDF

[ $SiO_2$ ] Effect on the Electrochemical Properties of Polymeric Gel Electrolytes Reinforced with Glass Fiber Cloth ($SiO_2$가 유리섬유로 보강된 고분자 겔 전해질의 전기 화학적 특성에 미치는 영향)

  • Park Ho Cheol;Kim Sang Heon;Chun Jong Han;Kim Dong Won;Ko Jang Myoun
    • Journal of the Korean Electrochemical Society
    • /
    • v.4 no.1
    • /
    • pp.6-9
    • /
    • 2001
  • [ $SiO_2$ ] effect on the electrochemical properties of polymeric gel electrolytes(PGEs) reinforced with glass fiber cloth(GFC) was investigated . PGEs were composed of polyacrylronitrile(PAN), poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)), $LiClO_4$ and three kind of plasticizer(ethylene carbonate, dietyl carbonate, propylene carbonate). $SiO_2$ was added to PGEs in the weight fraction of 10, 20, $30\%$ respectively. PGEs containing $SiO_2$ showed conductivity of over $10^{-3}S/cm\;at\;23^{\circ}C$ and electrochemical stability window to 4.8V. In the impedance spectra of the cells, which were constructed by lithium metals as electrodes, interfacial resistance increased due to growth of passivation layer during storage time and remarkable difference was not observed with content of $SiO_2$. In the impedance spectra of the lithium ion polymer batteries consisted of $LiClO_2$ and mesophase pitch-based carbon fiber(MCF), ohmic cell resistance of $SiO_2-free$ PGE was changed continuously with number of cycle, but those of $SiO_2-dispersed$ PGEs were not. Discharge capacity of the PGE containing $20wt\%\;SiO_2$ showed 132 mAh/g at 0.2C rate and $85\%$ of discharge capacity was retained at 2C rate.

Effects of demineralizaton-inhibition procedures on the bond strength of brackets bonded to demineralized enamel surface

  • Ekizer, Abdullah;Zorba, Yahya Orcun;Uysal, Tancan;Ayrikcil, Servet
    • The korean journal of orthodontics
    • /
    • v.42 no.1
    • /
    • pp.17-22
    • /
    • 2012
  • Objective: To study and compare the effects of different demineralization-inhibition methods on the shear bond strength (SBS) and fracture mode of an adhesive used to bond orthodontic brackets to demineralized enamel surfaces. Methods: Eighty freshly extracted, human maxillary premolars were divided into 4 equal groups and demineralized over the course of 21 days. Brackets were bonded to the demineralized enamel of teeth in Group 1. In Group 2, bonding was performed following resin infiltration ($ICON^{(R)}$, DMG, Hamburg, Germany). Before bonding, pre-treatment with acidulated phosphate fluoride (APF) or solutions containing casein phosphopeptide-amorphous calcium phosphate with 2% neutral sodium fluoride (CPP-ACP/wF) was performed in Groups 3 and 4, respectively. The SBS values of the brackets were measured and recorded following mechanical shearing of the bracket from the tooth surface. The adhesive remnant index (ARI) scores were determined aft er the brackets failed. Statistical comparisons were performed using one-way ANOVA, Tukey's post-tests, and G-tests. Results: Significant differences were found in some of the intergroup comparisons of the SBS values (F = 39.287, p < 0.001). No significant differences were found between the values for the APF-gel and control groups, whereas significantly higher SBS values were recorded for the resin-infiltrated and CPP-ACP/wF-treated groups. The ARI scores were also significantly different among the 4 groups (p < 0.001). Conclusions: Tooth surfaces exposed to resin infiltration and CPP-ACP/wF application showed higher debonding forces than the untreated, demineralized surfaces.