• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.466-469
• /
• 1998

The electronic fluorescent lamp ballast can promote the lighting efficiency up to 10-20% by driving high frequency with frequency transformation technique, and can completely eliminate the flickering phenomenon occurring from 60Hz frequency. The electronic ballast provides very high energy saving effects for it has high power fact than traditional ballast, and it is convenient to use. can extend the life of fluorescent lamp for it starts at once by driving with high frequency. However electronic ballast needs high price, and it can reduce the stability and reliability. This paper provides illumination systems which drive dozens of fluorescent lamps at the same time, to overcome these shortcomings of electronic ballast and utilize the advantage of electronic ballast.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.998-1002
• /
• 1998

The electronic fluorescent lamp ballast can promote the lighting efficiency up to 10-20% by driving high frequency with frequency transformation technique, and can completely eliminate the flickering phenomenon occurring from 60Hz frequency. The electronic ballast provides very high energy saving effects for it has high power factor than traditional ballast, and it is convenient to use, can extend the life cycle of fluorescent lamp for it starts at once by driving with high frequency. However electronic ballast needs high price, and it has the bad stability and reliability. This paper provides illumination systems, which drive dozens of fluorescent lamps at the same time, to overcome these shortcomings of electronic ballast and utilize the advantage of electronic ballast.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.98-103
• /
• 2001

In case that electronic ballast employing a valley-fill passive power factor correction (PFC) circuit is used for feeding fluorescent lamps, a new method to reduce crest factor of the lamp current is studied in this paper. In order to reduce crest factor to lower value, a pulse frequency modulation technique based on the waveform of the dc-link voltage which is predetermined by the passive PFC circuit, is taken into the switching control action of the electronic ballast. An equation-based analysis between the crest factor of lamp current and the effect of varying the inverter switching frequency is comprehensively performed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.621-625
• /
• 1999

Rosen type piezoelectric transformer for LCD backlight operated at high voltage and low current, may not be sucessfully used for illuminating general fluorescent lamps because low voltage and high current are required. In this study, the piezoelectric transformer with width vibration mode operated at low voyage and high current was designed for the application of fluorescent lasso ballast. The step-up ratio and efficiency as a function of the load resistance in the piezoelectric transformer indicated that the transformer can be effectively used for the electronic ballast for low profile fluorescent lamp.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.27-33
• /
• 1999

Compact fluorescent lamps are very sensitive to the variation of ambient temperature. This paper investigates the temperature characteristics of a 15[W] compact fluorescent lamp, and compensates the variation of light output by frequency control of its electronic ballast. Circuit parameters for the inverter of the electronic ballast are obtained by analyzing the R-L-C equivalent circuit for the inverter and the lamp. The optimum ratio of the two capacitance($C_1$/$C_2$), which are connected with the lamp in series and in parallel, respectively, is determined which consideration of the temperature variation within a range of 10~35[$^{\circ}C$]. As a result a value of 10 for the ratio is obtained at an operating frequency of 57[kHz], and with this value the frequency control works well for temperature compensation. Its validity is verified by investigating light output stabilization characteristics resulting from frequency control of the lamp at various temperatures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.589-592
• /
• 2001

In this paper, Electronic ballast for multiple fluorescent lamps based on the use of ferrite beads are presented. The use of this system in place of the conventional electromagnetic ballast results in lower power consumption and reduced maintenance cost, because the electronic system has higher efficiency and longer lamp lifetime than the electromagnetic ballast. In comparison with the conventional electronic ballast. The proposed system presents a significant reduction of cost. This reduction becomes were meaningful with the growing of the lamp number. The description of the lighting system, We show that the proposed model can be applied to multiple lamps electronic ballast by simulation processes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.589-592
• /
• 2001

In this paper, Electronic ballast for multiple fluorescent lamps based on the use of ferrite beads are presented. The use of this system in place of the conventional electromagnetic ballast results in lower power consumption and reduced maintenance cost, because the electronic system has higher efficiency and longer lamp lifetime than the electromagnetic ballast. In comparison with the conventional electronic ballast. The proposed system presents a significant reduction of cost. This reduction becomes were meaningful with the growing of the lamp number. The description of the lighting system, We show that the proposed model can be applied to multiple lamps electronic ballast by simulation processes.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.37-42
• /
• 1996

By making a electronic ballast, which is needed to operate a fluorescent lamp, it is possible to make a small and light weight ballast with high efficiency. And more, by increasing an operating frequency, the efficacy of lamp is increasing. In this paper, the variations of efficacy of a fluorescent lamp versus input frequency are studied With two kinds of fluorescent lamp, i.e., straight type(10W) and compact type(13W). The results show that the efficacy of lamps are increasing as input frequency is higher, and over 80[kHz], the slope of the variations of efficacy are slowdowned.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.638-644
• /
• 2008

It is required small size electronic ballast to fullfill the design philosophy of miniaturizing in the application of slim lamps. However, the traditional magnetic ballasts operated at 50-60Hz have been suffered from noticeable flicker, high loss, large crest factor and heavy weight. In this study, in order to solve these problems, It was proposed for driving 35W Class fluorescent lamp in the new type of electronic ballast, which is composed of rectifier, active power factor corrector, series resonant half bridge inverter and piezoelectric transformer. A 35W class(T5 class) fluorescent lamp is driven to successful by the fabricated ballast with piezoelectric transformer. Experimental results, It is proposed to driving the lamp using a electronic ballast at operating frequency of $75{\sim}79kHz$ approximatively. It is operated after for 25 min that were obtained good results of the input power factor of 0.95 and efficiency of 86%, respectively.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.27-36
• /
• 2007

A study to build a reliability model of electronic ballasts for the fluorescent lamp has been performed in this study. We selected the widely being used specification, MIL-HDBK-217 for the study. We briefly reviewed the basic concepts of the electronic ballast with the selected reliability specification. We then developed a reliability model for the ballast using MIL-HDBK-217 and predicted the reliability. We further provided some guides which should be considered in future model development.