• 한국자기학회지
• /
• 제9권2호
• /
• pp.121-126
• /
• 1999

친수성 철계 자성유체의 제조와 이 자성유체를 Nd-영구자석과 병용하여 기름 밀봉 장치의 개발을 목적으로 실험검토한 결과 다음과 같은 결론을 얻었다. 1)평균 입경 100$\AA$, 자화값 125.5emu/g, 대기중 15$0^{\circ}C$까지 산화 변질성이 없는 실리카 피착 철 초미립자의 표면에 오레인산 이온, D.B.S. 이온 및 T.M.A. 이온을 흡착한 후 ethylene glycol 용액중에 분산시켜 친수성 철 분말 자성유체를 제조할 수 있었다. 2)이상의 친수성 철 분말 자성유체[70%(g/ )Fe]를 영구자석(3200 Gauss)과 병용하여 기름 밀봉 장치에 응용한 결과 영구자석의 설치 개수를 영구자석 6단 그리고 구동축과 밀봉 장치 사이 간격 0.2mm의 조건에서 압력 7400g/$\textrm{cm}^2$까지 견딜 수 있는 우수한 내압 특성을 얻었다.

• Corrosion Science and Technology
• /
• 제13권4호
• /
• pp.130-138
• /
• 2014

Wall thinning can be classified into three types: flow-accelerated corrosion, cavitation erosion and solid particle erosion. This article presents a study of solid particle erosion, which frequently causes damages to power plants' pipe system. Unlike previous studies, this study uses a mechanism to make solid particles in a fluid flow collide with pipe materials in underwater condition. Experiment is conducted in three cases of velocity according to solid-water ratio using the three types of the materials of A106B, SS400, and A6061. The experiments were performed for 30 days, and the surface morphology and hardness of the materials were examined for every 7 days. Based on the velocity change of the solid particles in a fluid flow, the surface changes, the change in the amount of erosion, the erosion rate and the variation in the hardness of carbon steel and aluminum family pipe materials can all be determined. In addition, factor-based erosion rates are verified and a wall-thinning relation function is suggested for the pipe materials.

• 공업화학
• /
• 제26권1호
• /
• pp.67-73
• /
• 2015

전산유체해석 기법을 이용하여, 테일러 반응기 내 유동특성과 입자의 체류시간에 대하여 연구하였다. 테일러 반응기는 반응기의 작동조건에 따라 내부 유동특성이 달라지므로, 입구주입속도와 반응기 회전속도 변화에 따른 테일러 반응기 내부의 유동특성 변화를 살펴보았다. 또한 테일러 와류(TVF)영역에서 리튬이온전지의 양극물질인 NMC입자의 반응기 내 체류시간을 측정하였다. 입구에서의 복잡한 화학반응은 고려하지 않았고 테일러 유동의 영향만 고찰하였다. 해석결과 반응기의 회전속도가 높고 반응물의 주입속도가 낮을수록 입자의 체류시간이 길어지는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.365-372
• /
• 2016

전산유체역학(CFD)을 이용하여 테일러 반응기 내 입자간 응집과 분해반응을 고려한 유동해석을 수행하였다. 입자크기분포를 파악하기 위하여 모멘트 적분법(QMOM)을 이용하여 집합체 균형방정식(Population Balance Equation)을 계산하였다. 초기 여섯 개의 모멘트를 이용하였으며, 응집커널은 Brownian kernel 과 turbulent kernel의 합을, 그리고 분해커널은 멱법칙 커널(power-law kernel)을 사용하였다. 입자의 초기 부피분율에 따른 최종 입자크기를 예측하였다. 그 결과, 초기 부피분율이 증가할수록 입자의 크기와 초기 성장속도가 증가하는 것을 확인하였다.

• 한국입자에어로졸학회지
• /
• 제9권2호
• /
• pp.59-67
• /
• 2013

One of purposes in this study was to confirm the behavior of coughed particles under different ventilation conditions. Three types of ventilation systems were applied for this experiment and the properties of coughed particles were measured using computational fluid dynamics (CFD) in an intensive care unit. The changes of total airborne particles for each case showed different trends according to the ventilation type and time, but the deposited particles were similar in all conditions. Although the time taken for 50% of the particles to be deposited was the fastest in case 2, the portion of deposited particles after 300 seconds was only 5% in all conditions. In case 1, a relatively small number of particles were deposited on the wall, but the particle exhaust and deposition on the occupants were the highest. In case 3, the downward ventilation was applied as that recommended by the US Center for Disease Control and Prevention (CDC) and showed different exhaust efficiencies according to the particle size.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.240-248
• /
• 2005

The rheocasting characteristics are strongly influenced by the microstructural morphology such as particle size, form factor and contiguity. In this study, the effect of structural morphology on fluid flow characteristics of A356 semi-solid alloy was investigated with a vacuum suction fluidity test. Semi-solid metal slurry was made by the mechanical stirring, the liquidus casting, and H-NCM to be analysed. H-NCM could obtain uniform and fine globular microstructures of 0.9 form factor and 55 ${\mu}m$ particle size. Inoculation was found to be effective for reducing particle size, however, for H-NCM it should be avoided due to the cause of increasing contiguity. The fluidity test indicated that the non-stirring method had higher fluidity and smaller liquid segregation in the same solid faction of 0.4 than the stirring method, for smaller particle size and higher form factor. It was observed that liquid segregation decreased as the particle size is smaller and form factor is higher. The results of die-casting experiment were a good agreement with those of fluidity test.

• 대한건축학회논문집:구조계
• /
• 제34권12호
• /
• pp.73-82
• /
• 2018

The objective of this study was to evaluate particle collection performance of electrostatic precipitator (ESP) integrated with double skin façade in naturally ventilated residential buildings using numerical method. To evaluate the efficiency, computational fluid dynamics (CFD) simulation based on electric potential and Lagrangian method was applied. The CFD model was validated by comparing the simulated results with the experimental data including thermal characteristic of double skin façade (DSF) and particle removal characteristic of electrostatic precipitator. The validation results showed that the root mean square error (RMSE) between predicted values and measured values of velocity and temperature in intermediate space of DSF was 1.2%. The adequacy of ion space charge density and turbulent model were determined. The RMSE between predicted values and measured values of collection efficiency of ESP was 9.2%. In addition, the case study was performed to present the application of the numerical method based on validation results of ESP integrated with façade.

• 대한화학회지
• /
• 제7권1호
• /
• pp.47-50
• /
• 1963

The effect of the pulsation on the particle hold-up in a pulsed wetted column has been studied theoretically for the case of laminar region and experimentally for the cases of transient and turbulent regions. The experiment has been carried out by employing water as fluid medium and solid particles. The pulsation has been given by the reciprocating motion of a piston. The results of the investigation show that the pulsation would not give apparent effect on the particle hold-up but would increase the total travelling length of the particle.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.714-724
• /
• 1985

본 논문에서는 입자가 부상된 2상유동의 해석에서 여러유동조건의 유동을 공 통적으로 해석할 수 있고 또 유동의 난류구조를 규명할 수 있도록 하기 위해서 2-방정 식 난류모델을 적용하였고 또 지배방정식들 속에 나타나는 1유체와 2유체의 2차 상관 관계들을 모형화 할 때 Taweel and Landau의 스펙트럼 이론을 확장발전시켜 적용하였 다.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.94-99
• /
• 2017

The buoy of the wave energy converter moves by direct contact with the fluid. In order to design a buoy by using the numerical method, it is necessary to analyze not only the contact with the fluid but also the exact behavior of the fluid. In this paper, differences between weakly compressible smoothed particle hydrodynamics (WCSPH) and incompressible smoothed particle hydrodynamics (ISPH) are compared and analyzed for two-dimensional dam breaking simulation. ABAQUS, which is a commercial analysis program, is used for WCSPH analysis. A laboratory code is developed for ISPH analysis. The surface shape, the velocity, and the pressure pattern of the fluid are compared. The results of the laboratory code show the similar tendencies with those of ABAQUS, and there is a little difference in the pressure result.